ORi 95RU3 Series Manuel utilisateur
3.5 Inch External HDD Enclosure
95RU3 Series
User Manual
- 1 -
Catalog
What is in the box ........................................................................................................ 2
Product Introduction .................................................................................................. 2
Specifications .............................................................................................................. 3
Product features .......................................................................................................... 3
Product Illustration ..................................................................................................... 4
Set up RAID .................................................................................................................. 5
Set through ORICO HW RAID Manager Software ...................................................... 6
Attention ................................................................................................................... 13
Remove the Device ................................................................................................... 13
Hard-drive Format Partition Operation .................................................................. 13
Failure Solutions ....................................................................................................... 17
Notice ......................................................................................................................... 17
Declaration ................................................................................................................ 18
FCC ............................................................................................................................. 18
- 2 -
Thanks for choosing ORICO!
Please read this user’s manual carefully before using it!
What is in the box
1. The Product............................................................................................................................1PCS
2. Data Cable.......................................................................................................................1PCS
3. Power Cord/Power Adapter............................................................................................1PCS
4. Key...................................................................................................................................2PCS
5. User Manual....................................................................................................................1PCS
6. Thanks Card....................................................................................................................1PCS
Product Introduction
ORICO 95 series RU3 is a multi-bay 3.5 inch SATA hard drive enclosure. Aluminum alloy
material coupled with the quiet fan, making it a good heat-dissipation performance.
Meanwhile, it is designed with over current, short-circuit protections for the disk and data.
This series integrates RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Big and Normal modes.
RAID 0 mode provides you with a fast file transfer experience, and RAID 1 mode provides
you with safe file backup, RAID 3 and RAID 5 are the most ideal choice for creating secure
backups, while RAID 10 is a combination of RAID 1 and RAID 0; Big mode can help you to
combine multiple hard drives for easier data management. Normal mode is that all hard
drives do not form any RAID or group and can run independently.In terms of transmission,
the theoretical transmission speed of USB3.0 high-speed interface can reach 5Gbps.
The product, accessories and package may optimized for better application performance.
We sincerely sorry that they may not exactly match with what showing in manual and
appreciate your please adhere to the original products and contact ORICO customer care
team if any further concern. Thank you very much.
- 3 -
9558RU3 AC100-240V Power Cord
9548RU3 AC100-240V Power Cord
9528RU3 12V 3A Power Adapter
9558RU3 264(L)×146(W)×199.5(H)mm
9548RU3 264(L)×146(W)×164.5(H)mm
9528RU3 235(L)×145(W)×93.5(H)mm
Specifications
1. Tool-free installation, hot-swappable, plug and play.
2. Adopts SATA3.0 6Gbps bridging solution.
3. The USB transmission interface complies with the USB3.0 specification and supports
up to 5Gbps transmission rate.
4. LED indicator, monitoring the working status of the hard disk at any time.
5. Built-in lock hole, fenestration design, protects your data.
6. The 5-bay and 4-bay versions are built-in 150W power supply.
7. The 5-bay and 4-bay versions support 7 RAID modes, RAID 0, RAID 1, RAID3, RAID 5,
RAID 10, Big and Normal modes.
8. The dual-bay enclosure supports 4 modes, RAID 0, RAID 1, PM, SPAN.
9. Support intelligent sleep technology, energy saving and environmental protection, and
improve the service life of disks.
10. Hot-swappable, plug and play.
Product features
Model
Material
Surface
Input
Output
Transmission Rate
Data Cable
95RU3 Series
Aluminum Alloy
Frosted
SATA3.0
USB3.0 Type-B
5Gbps
USB Type-A/M To USB Type-B/M
Dimensions
Power Supply
- 4 -
9548RU3
① ④ ⑤ ⑥②③
③ SET② RAID button① Power Interface ④ USB3.0 Interface
⑤ Power Switch ⑥ LED Indicator ⑦ Keyhole ⑧ Bay
⑦ ⑧
Product Illustration
9528RU3
③ RAID button② USB3.0 Interface① Power Interface ④ SET
⑤ Power Switch ⑥ LED Indicator ⑦ Keyhole ⑧ Bay
①④⑤ ⑥ ⑦ ⑧② ③
- 5 -
③ SET② RAID button① Power Interface ④ USB3.0 Interface
⑤ Power Switch ⑥ LED Indicator ⑦ Keyhole ⑧ Bay
Set up RAID
· Note
1. Introduction of RAID Mode
This product supports RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Big and Normal.
RAID 0: Merge all HDDs' capacity in the HDD enclosure and upgrade its performance
(reading & writing speed).
RAID 1: Two HDDs in the HDD enclosure can backup each other, cannot upgrade its
performance (reading & writing speed). And it can support self restoration
function (RAID 0 and SPAN modes cannot support this function), which makes
files restored when mistakes and faults occur.
PS: RAID 1 can only support 2 HDDs.
RAID 3 and RAID 5 require 3 or more hard drives, one of which will be used for backup
data, and the remaining hard drives will be combined for your use.
RAID 3 or RAID 5 not only ensures data security, but also provides certain
performance improvements. It is the most economical RAID solution and is suitable for
most users.
9558RU3
① ②③④ ⑤ ⑥ ⑧⑦
1
2
3
4
5
3
4
5
- 6 -
· Set RAID through RAID Control Switch
1. Turn off the HDD enclosure and HDDs, switch the RAID control switch to "PM" position,
press "Set" button and turn on the power switch of the HDD enclosure. PM mode will
be set successfully in about 10s. It will buzz when the setting is completed.
2. Turn off the HDD enclosure and HDDs again, switch the RAID control switch to your
required RAID mode position, press "Set" button and turn on the power switch of HDD
enclosure. Required RAID mode will be set in about 10s. It will buzz when the setting is
completed.
3. HDDs or HDD group that has been set RAID mode will be displayed on computer later
and it can be started to use after initiating and partitioned formatting. Please try to
restart the HDD enclosure and computer or reset RAID mode if HDDs or HDD group
aren't displayed on computer.
RAID 10=RAID 0 + RAID 1
Big= Merge all HDDs' capacity in the HDD enclosure to make it easy to manage but
cannot upgrade its performance.
Normal=Normal state, all HDDs in the HDD enclosure work independently without
forming any RAID modes.
2. RAID mode needs two or more HDDs.
3. Please backup all files before setting or changing RAID mode, because all files stored in
HDDs in the HDD enclosure will be cleared while operating this.
4. Please don't change HDD bays' order under RAID mode to prevent its unstable running.
5. Please don't remove the HDD in the HDD enclosure under RAID mode. You should
delete the hardware and exit media on the computer before removing the HDD.
6. All HDDs work independently and are displayed on computer without forming any
RAID modes under Normal mode. Attention: Removing or inserting another HDD under
this mode will restart the HDD enclosure and make other HDDs disconnected
temporarily. So removing or adding HDD after powered off is recommended.
7. Please confirm Normal mode before setting or changing RAID mode. Or you could set
PM mode in advance before setting or changing RAID mode.
8. Do not change the order of the disks under RAID mode to avoid data loss.
9. HDD is precision equipment and RAID is precision system. Please backup your files all
the time and operate it carefully to avoid any data mistakes or data loss resulted from
improper operations.
- 7 -
Press and hold the "SET" button, then boot the enclosure, and release the SET
button after about 10 seconds, that is, the RAID mode is successfully set.
Note: After the RAID is successfully formed, a new hard disk will be generated. It must be
initialized and formatted before it can be used normally.
9548RU3、9558RU3 RAID modes
RAID 0(lower-lower-lower-upper) RAID 1/10(lower-lower-upper-upper)
RAID 3(lower-upper-upper-upper) RAID 5(upper-lower-upper-upper)
Span(Big)(lower-upper-lower-upper) Normal(upper-upper-upper-upper)
1
ON DIP
2 3 4
RAID 5
1
ON DIP
2 3 4
RAID 0
1
ON DIP
2 3 4
RAID 1/10
1
ON DIP
2 3 4
RAID 3
1
ON DIP
2 3 4
Span (Big)
1
ON DIP
2 3 4
Normal/ Clear
9528RU3 RAID modes
PM(upper—upper) RAID 0(lower—lower)
RAID 1(lower—upper) SPAN(upper—lower)
1ON
2
PM
1ON
2
PAID 0
1ON
2
RAID 1
1ON
2
SPAN/JBOB
（PS: White button is a function button）
（PS: White button is a function button）
- 8 -
Set through ORICO HW RAID Manager Software
1. Download and install ORICO HW RAID Manager from ORICO official site. Please unzip it
before operating if the software is RAR form.
2. Turn off the HDD enclosure, run Setup.exe of installation program and start installing
as the following pictures show. You may need to restart your PC after finishing the
installation.
- 9 -
4. Click the icon in the left box at the following picture to open the basic RAID setting
interface. Choose the required RAID mode in the RAID mode list and then click "Apply"
to set the RAID mode.
3. The shortcut of ORICO HW RAID Manager software will appear on PC desktop after
finishing the installation. Please turn on the power of the HDD enclosure and HDD,
double click to run the software to set or manage RAID.
Autres manuels pour 95RU3 Series
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels ORi Enceinte
