Oregon Scientific BAR623PA Manuel utilisateur

Alarm ...................................................................... 11

View Alarm Settings ......................................... 11

Set Alarm .......................................................... 11

Activate Alarm .................................................. 11

Silence Alarm ................................................... 12

Weather Forecast .................................................. 12

Temperature .......................................................... 13

Select Temperature Unit ................................... 13

Minimum / Maximum Rec rds .......................... 13

Moon Phase ........................................................... 13

Backlight ................................................................ 13

Reset System ........................................................ 1

Projection Unit ...................................................... 1

Safety and Care ..................................................... 1

Warnings ................................................................ 1

Troubleshooting .................................................... 15

Specifications ........................................................ 16

Main Unit Dimensi ns ...................................... 16

Rem te Sens r Dimensi ns ............................. 16

Temperature ..................................................... 16

Rem te Sens r (THN122N) ............................. 16

Cl ck / Pr ject r ............................................... 16

P wer ............................................................... 17

About Oregon Scientific ....................................... 17

FCC Statement ...................................................... 18

Declarati n f C nf rmity ................................. 19

CONTENTS

Contents ................................................................ 1

Introduction ........................................................... 2

Product Overview ................................................. 2

Fr nt View ......................................................... 2

Back View ......................................................... 3

LCD Display ...................................................... 4

Rem te Sens r (THN122N) .............................. 5

Getting Started ...................................................... 6

Batteries ............................................................ 6

AC Adapt r ........................................................ 7

Adjust Settings .................................................. 7

Remote Sensor (THN122N) .................................. 8

Set Up Sens r ................................................... 8

Data Transmissi n ............................................ 9

Search f r Sens r ............................................. 10

Clock ...................................................................... 10

Turn At mic Cl ck Signal ON / OFF ................. 10

Set Time Z ne / Cl ck / Calendar ..................... 11

Switch Cl ck Display ......................................... 11

Atomic Projection Clock with

Weather Forecast

Model: BAR623PA

USER MANUAL

INTRODUCTION

Thank y u f r selecting the Oreg n Scientific™ At mic

Pr jecti n Cl ck with Weather F recast (BAR623PA).

This device bundles precise time keeping with a

pr jecti n cl ck, weather f recast, and ind r and

utd r temperature m nit ring features int a single

t l y u can use fr m the c nvenience f y ur h me.

In this package, y u will find:

• Main unit with pr jecti n cl ck

• Main unit 4.5V AC / DC adapt r

• Rem te sens r (THN122N)

Keep this manual handy as y u use y ur new pr duct.

It c ntains practical step-by-step instructi ns, as well as

technical specificati ns and warnings y u sh uld kn w.

PRODUCT OVERVIEW

FRONT VIEW

1. SNOOZE / LIGHT butt n

2. and : Increase r decrease setting / activate r

deactivate at mic cl ck

3. MODE: Change display / settings

4. : View alarm status; set alarm

5. : Press t activate r deactivate alarm

6. Cl ck and utd r temperature pr ject r unit

7. LCD display

BACK VIEW

1. Pr ject r FOCUS kn b

2. Pr ject r IMAGE ROTATION kn b

3. PROJECTION ON / OFF switch

4. AC / DC adapt r plug c ver

5. Battery c mpartment (c ver ff)

6. SEARCH butt n t l cate the rem te sens r

7. MEM: View current, maximum, and minimum

temperature readings

8. °C / °F switch

9. RESET h le

10. Battery c mpartment (c ver n)

11. Fixed table stand

LCD DISPLAY

1. Weather display

2. At mic cl ck signal ic n

3. Alarm activated

4. Alarm setting

5. Time

6. Ind r temperature

7. L w battery ic n f r main unit

8. °C / °F (Outd r temperature)

9. Sens r signal

10. L w battery ic n f r sens r

11. Outd r temperature

12. Calendar

13. M n Phase

REMOTE SENSOR (THN122N)

1. Wall m unt h le

2. RESET h le

3. CHANNEL number (1-3)

4. Battery c mpartment

(Battery c mpartment c ver n t sh wn)

1. LED status indicat r

UNIT LOCATION

Main Ind r Temperature Area

Rem te Outd r Temperature Area

Installing the batteries:GETTING STARTED

BATTERIES

Main unit 3 x UM-3 (AA) 1.5V batteries

Rem te unit 2 x UM-4 (AAA) 1.5V batteries

Insert batteries bef re first use, matching the p larity

(+ and -) as sh wn in the battery c mpartment. F r best

results, install batteries in the rem te sens r bef re the

main unit. Press RESET after each battery change.

NOTE D n t use rechargeable batteries.

sh ws when batteries are l w.

NOTE It is rec mmended that y u use alkaline batteries

with this pr duct f r l nger perf rmance.

AC ADAPTOR

The main unit is supplied with a 4.5V AC / DC adapt r,

which pr vides c ntinu us cl ck / temperature pr jecti n.

Inserting the adapt r:

ADJUST SETTINGS

T adjust the time, calendar and language settings:

1. Press and h ld MODE f r 2 sec nds t enter setting

m de.

2. Press r t change settings. (T reach the

setting y u want quickly, press and h ld r .)

3. Press MODE t c nfirm.

Installing the batteries:

Using the wall m unt r stand:

REMOTE SENSOR (THN122N)

This pr duct is shipped with a THN122N Therm meter

Sens r that c llects Temperature data. The main unit

can be c nnected t nly 1 rem te sens r.

SET UP SENSOR

1. Open the rem te sens r battery c mpartment with

a small Phillips screwdriver.

2. Insert the batteries, matching the p larity (+ and -)

as sh wn in the battery c mpartment.

3. Set the channel switch t any channel. The switch is

l cated in the battery c mpartment.

4. Place the sens r near the main unit. Press RESET

n the sens r. Then, press and h ld SEARCH n

the main unit t initiate signal sending between the

sens r and the main unit. The recepti n ic n n the

main unit will blink f r appr ximately 3 minutes while

it is searching f r the sens r. (Refer t the Data

Transmissi n secti n f r m re inf rmati n.)

5. Cl se the rem te sens r battery c mpartment.

6. Secure the sens r in the desired l cati n using the

wall m unt r table stand.

F r best results:

• Insert the batteries and bef re y u m unt the

sens r.

• Place the sens r ut f direct sunlight and

m isture.

• D n t place the sens r m re than 98 feet (30

meters) fr m the main (ind r) unit.

• P siti n the sens r s that it faces the main

(ind r) unit, minimizing bstructi ns such as

d rs, walls, and furniture.

• Place the sens r in a l cati n with a clear view

t the sky, away fr m metallic r electr nic

bjects.

• P siti n the sens r cl se t the main unit during

c ld winter m nths as bel w-freezing

temperatures may affect battery perf rmance and

signal transmissi n.

Y u may need t experiment with vari us l cati ns t

get the best results.

Standard Alkaline batteries c ntain significant am unts

f water. Because f this they will freeze in l w

temperatures f appr ximately 10°F. Disp sable Lithium

batteries have a much l wer thresh ld f r temperature

with an estimated freezing range f bel w -40°F. The

Liquid Crystal Display in utd r therm meters will

remain perati nal t -20°F with adequate p wer.

Wireless ranges can be impacted by a variety f fact rs

such as extremely c ld temperatures. Extreme c ld may

temp rarily reduce the effective range between the

sens r and the base stati n. If the unit's perf rmance

fails due t l w temperature, the unit will resume pr per

functi ning as the temperature rises t within the n rmal

temperature range (i.e. n permanent damage will ccur

t the unit due t l w temperatures).

DATA TRANSMISSION

Data is sent fr m the sens r every 40 sec nds. The

recepti n ic n sh wn in the Temperature Area sh ws

the status.

ICON

The sens r cann t be

f und. Search f r the

sens r r check batteries

--- sh w in Outd r

Temp Area

DESCRIPTION

Main unit is searching

f r the sens r

A Channel has been

f und

T f rce a manual search f r at mic cl ck signals, press

and h ld f r 2 sec nds. If n signal is f und, check

the batteries.

TURN ATOMIC CLOCK SIGNAL ON / OFF

Perf rm this step if y u cann t receive at mic cl ck

signals. Press and h ld f r 2 sec nds. Then, manually

set the cl ck f ll wing the “Set Cl ck” instructi ns.

The signal ic n indicates that the cl ck feature is

ON. N ic n means that it is OFF.

Once c mplete, the recepti n ic n will st p blinking. The

ic n is sh wn in the Cl ck Area.

STRONG SIGNAL WEAK SIGNAL NO SIGNAL

SEARCH FOR SENSOR

T search f r the sens r, press and h ld SEARCH ( n

the main unit) f r 2 sec nds.

NOTE If the sens r is still n t f und, check the batteries,

bstructi ns, and rem te unit l cati n.

NOTE Signals fr m h useh ld devices such as

d rbells, electr nic garage d rs, and h me security

systems may cause temp rary recepti n failure. This is

n rmal and d es n t affect general pr duct perf rmance.

The recepti n will resume nce the interference ends.

CLOCK

The cl ck aut matically synchr nizes the current time

and date when it is br ught within range f the WWVB-

60 at mic cl ck signal generated fr m F rt C llins,

C l rad . F r m re inf rmati n, please visit: http://www.

b ulder.nist.g v/timefreq/stati ns/radi cl cks.htm

NOTE The signals are c llected by the main unit when

it is within 932 miles (1500 km) f a signal.

Initial recepti n takes 2-10 minutes, and is initiated when

y u first set up the unit, and whenever y u press RESET.

Autres manuels pour BAR623PA

Autres manuels Oregon Scientific Horloge

Oregon Scientific

Oregon Scientific RM338SP Manuel utilisateur

Oregon Scientific

Oregon Scientific RM982A Manuel utilisateur

Oregon Scientific

Oregon Scientific POLERMO RMR939PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RRA320PNX Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM612P Manuel utilisateur

Oregon Scientific

Oregon Scientific RA368P Manuel utilisateur

Oregon Scientific

Oregon Scientific WL388 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM313PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RM802 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM338SP Manuel utilisateur

Oregon Scientific

Oregon Scientific RM309PU Manuel utilisateur

Oregon Scientific

Oregon Scientific RM338P Manuel utilisateur

Oregon Scientific

Oregon Scientific Imola FST-301 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM968A Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Oregon Scientific

Oregon Scientific JW108 Manuel utilisateur

Oregon Scientific

Oregon Scientific MSR939 Manuel utilisateur

Oregon Scientific

Oregon Scientific BAA339DPH Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR339P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM826A Manuel utilisateur

Oregon Scientific

Oregon Scientific BA200 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM968 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR612HGA Manuel utilisateur

Oregon Scientific

Oregon Scientific RM313PNFA Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur