Oregon Scientific BAA339DPH Manuel utilisateur

E N

Weather Day & Night

Model: BAR339DP / BAR339DPA /

BAR339DPU / BAA339DPH

USER MANUAL

CONTENTS

Overview ...................................................................2

Front View .............................................................. 2

Back View ..............................................................3

Remote Sensor ......................................................3

Getting Started .........................................................3

Main Unit Installation .............................................3

Remote Sensor Installation .................................... 4

Clock .........................................................................5

Clock Reception ..................................................... 5

Manually set Clock ................................................. 6

Alarm ........................................................................6

Weather Forecast ....................................................6

Temperature ............................................................7

Projection .................................................................7

Backlight ..................................................................7

Reset .........................................................................7

Speciﬁcations .......................................................... 8

Main Unit ................................................................ 8

Remote RF Clock Thermo Sensor ......................... 8

Precautions ..............................................................8

About Oregon Scientiﬁc .........................................9

EU-Declaration of Conformity ................................ 9

FCC Statement .........................................................9

Declaration of Conformity .................................... 10

BAR339DP_M_EN_R6.indd 1 6/18/08 12:29:43 PM

E N

OVERVIEW

FRONT VIEW

1. SNOOZE: Activate snooze alarm; turn on backlight;

ﬂip projected image 180º

2. Weather forecast

3. Outdoor remote sensor battery low

4. Radio controlled clock reception icon

5. PM: Indicates PM (12 hour mode)

6. Indicate alarm time is displayed

7. Indicate daily alarm is On

8. PM: Indicates PM (12 hour mode)

9. CLOCK: Change display; set clock

10. TEMP: Toggle between indoor / outdoor temperature

display; activate / deactivate auto-scan

11. Main unit batteries low / no battery

12. Projector: Project time / outdoor temperature and

weather forecast

13. Indicate indoor / outdoor sensor reception

status

14. Outdoor Temperature (Current / Max / Min)

15. Clock

16. Time Zone Offset

17. Calendar with weekday / seconds

18. ALARM: View alarm status / set alarm

19. MEM: Toggle between current / maximum /

minimum temperature display; clear records

BAR339DP_M_EN_R6.indd 2 6/18/08 12:30:06 PM

E N

BACK VIEW

1. FOCUS Wheel: Adjust projection focus

2. AC/DC Adaptor socket

3. / : Decrease / increase value of the setting;

enable / disable clock reception

4. SEARCH: Initiate sensor search

5. °C / °F: Select temperature unit

6. LIGHT ON/OFF: Turn backlight continuously On

(adaptor installed) / only when SNOOZE key is

pressed

7. RESET: Reset unit to default settings

8. PROJECTION OFF- CLOCK - AUTO: Select

projection display

9. Battery compartment

REMOTE SENSOR

FRONT VIEW BACK VIEW

1. RESET: Reset unit to default settings

2. EU / UK Switch (RTHN318D sensor only)

3. Channel Switch

4. Double sided adhesive tape

5. Wall mount hole

6. Battery compartment

GETTING STARTED

MAIN UNIT INSTALLATION

Batteries serve as a back-up power supply. For

continuous use of projector and backlight, install

adapter.

BAR339DP_M_EN_R6.indd 3 6/18/08 12:30:38 PM

E N

• Plug AC/DC adaptor into socket. Make sure the

adapter is not obstructed and is easily accessible

to the unit.

To completely disconnect from power, the adapter

should be disconnected from the main unit.

NOTE The main unit and adapter should not be

exposed to wet conditions. No objects ﬁlled with liquid,

such as vases, should be placed on the main unit and

adapter.

Memory backup:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the polarities.

NOTE Batteries should not be exposed to excessive

heat such as sunshine or ﬁre.

REMOTE SENSOR INSTALLATION

1. Slide open the battery door.

2. Slide channel switch to channel 1.

3. Select EU/UK. (RTHN318D only)

4. Insert the battery, matching the polarities (+ / -).

5. Press RESET after each battery change.

6. Close the battery door.

7. Press and hold SEARCH on main unit to initiate

search and start receiving time and temperature

data from the sensor.

The sensor reception icon shows the status:

ICONS MEANING

Main unit is searching

for sensor(s)

A sensor channel

has been found and

logged on

No sensor found

NOTE After every sensor initialisation, the main unit

may take up to 30 minutes to receive the time from

the sensor.

8. Secure the sensor in the desired location using the

wall mount hole or double sided adhesive tape.

BAR339DP_M_EN_R6.indd 4 6/18/08 12:30:50 PM

E N

For best results:

• Place the sensor within 30 m (100 ft) of the main

unit.

• Place the sensor out of direct sunlight and

moisture.

• Position the sensor so that it faces the main unit,

minimizing obstructions such as doors, walls and

furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic / electronic objects.

• Position the sensor close to the main unit during

cold winter months as below-freezing temperatures

may affect battery performance and signal

transmission.

TIP The transmission range may vary depending

on many factors. You may need to experiment with

various locations to get the best results.

NOTE Use alkaline batteries for longer usage and

consumer grade lithium batteries in temperatures

below freezing.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock

automatically with a clock signal received from

provided remote sensor.

To enable / disable signal reception:

Press and hold to enable or to disable signal

reception.

NOTE Reception takes 2-10 minutes. If the signal is

weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG SIGNAL WEAK / NO SIGNAL

NOTE Clock reception is dependent on the successful

transmission of data from remote sensor. If is

displayed, press RESET on sensor and press and

on the main unit and ensure sensor has been

successfully logged.

BAR339DP_M_EN_R6.indd 5 6/18/08 12:31:03 PM

E N

MANUALLY SET CLOCK

To set the clock manually, disable the clock signal

reception ﬁrst.

1. Press and hold CLOCK.

2. Press / to change the settings.

3. Press CLOCK to conﬁrm.

The settings order is: time zone, 12/24 hr format,

hour, minute, year, calendar mode (month – day / day

– month), month, day and language.

BAR339DP: Time zone offset sets the clock +/- 23

hours from the received clock signal time.

NOTE If you enter + 1 in the time offset setting, this will

give you your local time plus one hour. If you are in the

US (BAR339DPA only) set the clock to:

0 for Paciﬁc time +1 for Mountain time

+2 for Central time +3 for Eastern time

NOTE The language options are English (E), Spanish (S),

Italian (I), French (F), German (D), and Russian (R).

To select clock display mode:

Press CLOCK to toggle between clock with seconds,

clock with weekday.

ALARM

To set the alarm:

1. Press and hold ALARM.

2. Press / to change the settings.

3. Press ALARM to conﬁrm.

indicates alarm is on.

To activate / deactivate alarm:

1. Press ALARM to display alarm time.

2. Press ALARM again to turn alarm on / off.

To silence the alarm:

• Press SNOOZE to silence it for 8 minutes

• Press any key to turn the alarm off and activate it

again after 24 hours.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of

weather within a 30-50 km (19-31 mile) radius with a

75% accuracy.

Main unit Projector

Sunny

Partially Cloudy

Cloudy

Rainy

Snowy

BAR339DP_M_EN_R6.indd 6 6/18/08 12:31:20 PM

E N

TEMPERATURE

To toggle between indoor / outdoor temperature

display:

Press TEMP.

To toggle temperature unit:

Press °C / °F.

To auto-scan between sensors:

Press and hold TEMP.

To deactivate auto-scan function:

Press TEMP.

To toggle between current, minimum and maximum

records for indoor / outdoor:

Press MEM repeatedly.

To clear records:

Press and hold MEM.

PROJECTION

This unit projects time, outdoor temperature information

and weather forecast for your convenience.

NOTE Install adapter to use projection feature.

To ﬂip projected image by 180°:

• Press SNOOZE.

To project weather forecast and time:

• Press SNOOZE when PROJECTION switch is in

OFF mode

• Slide PROJECTION switch to CLOCK mode for

continuous display.

To project weather forecast and activate toggling

display of time / outdoor temperature:

• Slide PROJECTION switch to AUTO mode.

To deactivate projection:

• Slide PROJECTION switch to OFF mode.

To focus image:

• Turn FOCUS wheel.

NOTE If projection is illuminated, do not look directly

into the projector.

BACKLIGHT

To activate continuous backlight:

• Slide LIGHT – ON / OFF switch to ON.

To deactivate continuous backlight:

• Slide LIGHT – ON / OFF switch to OFF (Press

SNOOZE to activate LED backlight for 5 seconds).

RESET

Press RESET to return to the default settings.

BAR339DP_M_EN_R6.indd 7 6/18/08 12:31:25 PM

E N

SPECIFICATIONS

MAIN UNIT

TYPE DESCRIPTION

L x W x H 142 x 42 x 158 mm

(5.59 x 1.65 x 6.22 in)

Weight 270g (9.52 oz) without battery

Power 5V AC adaptor

2 x CR2032 batteries

(for backup)

REMOTE RF CLOCK THERMO SENSOR

TYPE DESCRIPTION

L x W x H 64 x 25 x 98 mm

(2.52 x 0.98 x 3.86 in)

Weight 80 g (2.8 oz) without battery

Temperature range -20°C to 60°C (-4°F to 140°F)

Resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Transmission range 30 m (98 ft) unobstructed

No. of channels 5

Power 1 x UM-3 (AA) 1.5 V batteries

PRECAUTIONS

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity.

• Do not cover the ventilation holes with any items

such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components.

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old

batteries.

• Images shown in this manual may differ from the

actual display.

• When disposing of this product, ensure it is

collected separately for special treatment and not

as normal household waste.

• Placement of this product on certain types of

wood may result in damage to its ﬁnish for which

Oregon Scientiﬁc will not be responsible. Consult

the furniture manufacturer’s care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before ﬁrst use.

BAR339DP_M_EN_R6.indd 8 6/18/08 12:31:26 PM

E N

NOTE The technical speciﬁcations for this product and

the contents of the user manual are subject to change

without notice.

NOTE Features and accessories will not be available

in all countries. For more information, please contact

your local retailer.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientiﬁc.com) to learn

more about Oregon Scientiﬁc products. If you’re in

the US and would like to contact our Customer Care

department directly, please visit:

www2.oregonscientiﬁc.com/service/support.asp

For international inquiries, please visit:

www2.oregonscientiﬁc.com/about/international.asp

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientiﬁc, declares that this Weather

Day & Night (Model: BAR339DP / BAR339DPA /

BAR339DPU / BAA339DPH) is in compliance with the

essential requirements and other relevant provisions

of Directive 1999/5/EC. A copy of the signed and dated

Declaration of Conformity is available on request via

our Oregon Scientiﬁc Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland

and Norway

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

BAR339DP_M_EN_R6.indd 9 6/18/08 12:31:29 PM

E N

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please visit our website at www2.

oregonscientiﬁc.com/service for all enquiries.

Name: Oregon Scientiﬁc, Inc.

Address: 19861 SW 95th Ave.,Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: BAR339DP / BAR339DPA /

BAR339DPU / BAA339DPH

Product Name: Weather Day & Night

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received,

including interference that may cause undesired

operation.

BAR339DP_M_EN_R6.indd 10 6/18/08 12:31:30 PM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Oregon Scientific Horloge

Oregon Scientific

Oregon Scientific RM622P Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM612P Manuel utilisateur

Oregon Scientific

Oregon Scientific RAR601 Manuel utilisateur

Oregon Scientific

Oregon Scientific RGR682 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM912TH Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR500ES Manuel utilisateur

Oregon Scientific

Oregon Scientific WS902 Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM612P Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR332ES Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR223P Manuel utilisateur

Oregon Scientific

Oregon Scientific DP100 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR682 Manuel utilisateur

Oregon Scientific

Oregon Scientific BARM839 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM602 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM912TCN Manuel utilisateur

Oregon Scientific

Oregon Scientific RM303P Manuel utilisateur

Oregon Scientific

Oregon Scientific RRA320PNX Manuel utilisateur

Oregon Scientific

Oregon Scientific PROJI Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR339PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM320P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM832 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM329P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM116E Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR939P Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur