Optoma Nu force BE6 Manuel utilisateur

BE6

Bluetooth in-ear headphone

User manual

Contents

WHAT’S IN THE BOX

BE6 EARPHONES

THE BASICS

Charging Your BE6

Checking Battery Level

Bluetooth Pairing

Power On/ Power Off

Wearing Your BE6

Handling Phone Calls

Listening to Music

Pairing with a Laptop

Pairing with a Mac

MISCELLANEOUS

Multipoint Connections

Restoring Factory Settings

Voice Prompts List

Disclaimer

FCC Interference Statement

Specification

WHAT’S IN THE BOX

BE6 earphones (with inline

controller and microphone)

Silicon tips (Silicon 4 pairs in

L/M/S/XS)

Comply tips (two pairs in L/M)*

Stabilizers (1 pair)

Cable loop for adjusting the length

of cable

Carry Case

Charging Cable (Micro-USB)

Quick Start Guide

Safety Instruction

*You are able to purchase replacement ComplyTM Foam tips through

www.complyfoam.com .

BE6 EARPHONES

1. Volume Up Button

2. LED Indicator

3. Power/Function Button

4. Charging port

5. Volume Down Button

6. Microphone

The BASICS

Charging Your BE6

Although your BE6 in-ear headphones come with a partially charged

battery, it is recommended that you fully charge your BE6 before first

use.

1. Open the charge port cover on the controller.

2. The charge cable should be connected to the charge port and

either to a PC or a dedicated USB charger.

3. When charging, the LED indicator is red.

4. LED Indicator turns off once charging is complete.

NOTE: It takes up to 2.5 hours to fully charge the BE6.

Checking Battery Level

You can check the battery level of your BE6 with the LED indicator *

To check battery level:

1. Press the Power/Function, volume up, and volume down buttons

simultaneously.

2. The LED indicator will flash red and blue simultaneously. The

battery level will be indicated by the number of flashes, as

described in the table below:

Number of Flashes Battery Level

Number of flashes

Voice prompts(enable)

Battery Low

Battery at 50%

Battery at 90%

Full Battery

NOTE: When the battery level is low, you will hear a beep or a “Battery

Low” voice prompt from your BE6 every 2 minutes when the estimated

battery reserve remaining time is under 15minutes.

IN ADDITION:

1. When the Voice prompts are switched off you will hear a beeping

sound (Ashort double tone) every two minutes.

2. Users with iOS devices and some Android models will be able to

view the battery status on their device’s display

*On some Android and all Windows operated devices you cannot check

the battery level for your BE6 when you listen to music, in the middle of a

phone call or in pairing mode.

Bluetooth Pairing

Using your BE6 for first time

Pairing BE6 with source device

1. Press and hold the BE6’s Power/Function button for 6 seconds

until the LED indicator light flashes blue/red. Your BE6 is now in

pairing mode.

2. Turn on Bluetooth® on your source device, then select “Optoma

NuForce BE6”once it appears on the device list.

NOTE: Consult your source device’s user manual for instructions on activating

Bluetooth.

3. Once successfully paired, the LED indicator will flash blue and

you hear “Primary device connected”(when voice prompt enabled)

from your BE6, or a beep if voice prompt is not enabled.

Please note:

A. You must always enter “Pair”mode from a powered-off state.

Otherwise, pushing the Power/Function button for more than 3

seconds from a powered-on state turns the BE6 off.

B. If left inactive in pairing mode, your BE6 will automatically power

off after 3 minutes.

C. Your BE6 can store pairing information for up to eight devices.

To pair additional devices to your BE6 ensure that your BE6 is not

concurrently connected to any device, then repeat the steps 1,2,3

outlined above.

In case where your BE6 have already stored pairing information

for eight devices and a ninth device is paired, the stored

information for the very first device will be deleted.

Power On/Power Off

To power on your BE6, press Power/Function button for about 3 seconds

until the LED indicator flashes blue and you hear the “Power on”when

voice prompt is activated or a beep if the voice prompt is not used.

NOTE:

Once you have successfully paired the BE6 to a Bluetooth-enabled device,

the BE6 will automatically connect with that device once it is powered on

again. For more information check “Bluetooth Pairing”section.

If you have stored pairing information for multiple devices and more than

one of those devices is Bluetooth enabled, the BE6 will automatically

connect with the most recently paired device and will also enable

multipoint connection.

For more information read section “Multipoint Connections”.

To turn the BE6 to OFF, push Power/Function button for about 3 seconds

until the LED indicator turns red and you hear the “Power off””when

voice prompt be activated or a beep if the voice prompt is not used.

Wearing Your BE6

To ensure a secure and comfortable fit when wearing your BE6:

1. Install the stabilizers on the BE6 (see red arrow)

2. Select right size of ear tips and install tips on BE6.

3. Rotate the stabilizers and place the BE6 into each ear so that

they are positioned comfortably.

Magnetic caps at the end of the earphones let users click the

earphones together for ease of use.

Handling Phone Calls

When your BE6 are connected to a Bluetooth-enabled smartphone you

can handle your phone calls directly using your BE6 in ear headphones.

The followings describe phone call options:

Call option

Status

Action

Answer a call

Incoming call

Tap the Power/Function button

Decline a call

Incoming call

Press the Power/Function button for 2 seconds

End a call

In a call/outgoing call

Tap the Power/Function button

Redial the last number

Standby/connected

Double tap the Power/Function button

Mute on or mute off microphone

In a call/outgoing call

Tap the Volume Up and Volume Down simultaneously

Switching handset/earphone voice

In a call

Press the Volume Up and Volume Down buttons

simultaneously for 2 seconds

Adjust the volume

Tap the Volume Up or Volume Down button

Activate Siri (iOS) or Google Voice

Search (Android)

Standby/Connected

Tap the Power/Function and Volume Up buttons

simultaneously

Listening to Music

You can enjoy and control Audio through the in line controller on your

BE6.

Audio option

Action

Play or pause audio

Tap the Power/Function button

Skip to next track

Press the Volume Up button for 2 seconds

Play previous track

Press the Volume Down button for 2 seconds

Adjust the volume

Tap the volume up or volume down button

*Please note: when muting the BE6 or reactivating it from MUTE there will be a very slight delay

Autres manuels pour nu force BE6

Table des matières

Autres manuels Optoma Casque audio

Optoma

Optoma Nu Force NE750M Manuel utilisateur

Optoma

Optoma nu force BE6i Manuel utilisateur

Optoma

Optoma NuForce BE Free8 Manuel utilisateur

Optoma

Optoma nu force BE6 Manuel utilisateur

Optoma

Optoma NuForce BE Live2 Manuel utilisateur

Optoma

Optoma nu force BE6i Manuel utilisateur

Optoma

Optoma BE Sport3 Manuel utilisateur

Optoma

Optoma NuForce BE Free6 Manuel utilisateur

Optoma

Optoma NuForce BE Sport4 Manuel utilisateur

Optoma

Optoma NuForce Bluetooth BE Live5 Manuel utilisateur

Optoma

Optoma Nu Force Primo8 Manuel utilisateur

Optoma

Optoma BE Sport3 Manuel utilisateur

Optoma

Optoma NuForce APBEL Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Philips

Philips SHE3622 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Philips

Philips SHQ3000 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Philips

Philips EARGEAR HE205 Series Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur