Option Audio GlobeTrotter PCI Express Mini Card Manuel utilisateur
GlobeTrotter PCI Express Mini
Card Quick Start Guide Module
Certification
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
About this document
Confidentiality
All data and information contained or disclosed by this document is confidential and proprietary of
Option NV, and all rights therein are expressly reserved. By accepting this document, the recipient
agrees that this information is held in confidence and in trust and will not be used, copied, reproduced
in whole or in part, nor its contents revealed in any manner to others without prior and written
permission of Option NV.
Version History
Date Version Author(s) Revision(s) Remarks
July 31., 2006 J. Boeckx How to amount module
Table of contents
1Introduction.....................................................................................................................................2
2Overview.........................................................................................................................................3
3Hardware Installation......................................................................................................................3
4Driver Installation...........................................................................................................................5
4.1 Installation procedure:...........................................................................................................5
5HyperTerminal................................................................................................................................9
1INTRODUCTION
For evaluation purposes the GlobeTrotter PCI Express mini cards modules are housed in a cradle,
offering a convenient evaluation and development platform. This document further describes the
hardware and software installation and basic usage instructions for Windows XP English edition.
2OVERVIEW
1. SIM card holder 3. Audio CODEC chip reset button
2. SIM card eject mechanism 4. Small USB connector1
Figure 1: Pepijn Cradle bottom view
3HARDWARE INSTALLATION
Step-by-step instructions:
(1) Insert the module skew into the cradle and (2) push the module down, so it makes proper contact in
the PCI Express connector. (3) Secure the module with the locking mechanism.
Remark: Fasten the screw of the locking mechanism when it becomes too loose by holding one finger on top of the screw and
turning the leg in counter clockwise direction.
Figure 2: Module and Cradle board
(4) Carefully insert your SIM card in the SIM card holder (with the contact side up), and (5) insert the
holder into the socket, making sure it is aligned correctly. To remove the SIM card holder, (6) press the
small eject button with the tip of a pen (you may need to apply gentle force).
1The small and big USB connector both work for the same USB interface
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 3: SIM card holder
(7) Connect the external antenna (or SMA connector cable for test equipment) to the RF connector on
the module.
Figure 4: RF connector on the module
(8) Connect the headset into the audio jack (MODULE WILL ALSO WORK PROPERLY EVEN
WITHOUT THIS JACK). Next, (9) connect the power supply plug (the adapter should already be
connected to the mains) to the evaluation platform. And when you are ready you can (10) connect the
USB cable from the GTM cradle to your PC. At this point your module should be detected by the host
PC.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 5: Top to bottom: USB cable, power plug and audio jack
NOTES:
In case a hard reset of the unit is necessary, unplug the power supply and wait until the power led (led closest to the fan) is fully
extinguished before reconnecting the power supply (A large buffer capacitor on the cradle board needs about 10 seconds to
discharge).
4DRIVER INSTALLATION
Following drivers are available for Win XP, Win 2K and Win XP x64 edition:
•Device: GlobeTrotter Module 3G+
•Multifunction Adapter: GlobeTrotter Module 3G+ Flip-Flop Bus
•Port: GlobeTrotter Module 3G+ Diagnostics Port
•Port: GlobeTrotter Module 3G+ Application Port
•Network: GlobeTrotter Module 3G+ Network Card
•Modem: GlobeTrotter Module 3G+ Modem
•Smart Card: GlobeTrotter Module 3G+ Smart Card Interface (Optional)
For full functionality of your module, you need to make sure all drivers are installed correctly.
4.1 Installation procedure:
(1) If you have not already done so, install and connect the cradle as described in chapter 3. The unit is
connected correctly only if the “Found New Hardware” balloon and subsequent “Welcome to the
Found New Hardware” Wizard appears.
Figure 6: Found New Hardware
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 7: Welcome to the Found New Hardware Wizard
(2) For Windows XP: on the first dialog (“Can Windows connect to Windows Update to search for
software?”) select “No, not this time”
(3) On the next dialog, select ”Install software automatically (Recommended)”. At this point make sure
the CD-ROM with drivers is inserted into your optical drive.
Figure 8: Install the software automatically (Recommended)
Or if you know the location of the drivers yourself you can select “Install from a list or specific
location (Advanced)”. In this case make sure to select the option “Include this location in the search:”
in the next screen and enter the correct path to your drivers.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 9: Install from a list or specific location (Advanced)
(4) If the drivers have been fully signed, an automatic process takes you further. If however the
supplied drivers are not yet WHQL signed for Windows2, you will get a pop-up with signing warnings
from Windows. Just click "Continue Anyway":
Figure 10: Continue Anyway
(5) Click “Finish” in the next screen “Completing the Found New Hardware Wizard”
2Un-signed drivers are fully functional and have been thoroughly tested when released. But only they
are not yet “Microsoft certified”.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 11: Completing the Found New Hardware Wizard
(6) Repeat step 3 to 5 for all mentioned drivers.
(7) On successful installation of all drivers the device manager will show following typical installed
devices.
Figure 12: Device manager after driver installation
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
To get to device manager go to “Start” menu and select “Run”. In the next dialogue type
“devmgmt.msc” as shown on the next screenshot:
Figure 13: Run to device manager
5HYPERTERMINAL
This section describes briefly how to setup HyperTerminal to communicate with the PCI Express Mini
Card by AT commands.
(1) Go to device manager, and check which port is the Application port.
In this example, the application port is COM6.
Figure 14: Device manager
(2) Open HyperTerminal with the “Start” menu in Windows:
Start →Programs →accessories →Communication →HyperTerminal
(3) Normally, you have to do the following two steps only once. If you already have done so in the past
you can skip to step 5. If not, choose a country and an area code. For use with the module, it does not
matter, so just enter anything.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Figure 15: Location information
(4) Just “OK” the next “Phone and Modem Options” screen.
Figure 16: Phone and Modem Options
(5) Enter a name for your HyperTerminal Connection and press OK.
OPTION NV, Gaston Geenslaan 14, 3001 Leuven - Belgium
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Table des matières
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
