One Forall Essence 4 Manuel utilisateur

How can I program a missing function on my Essence remote?

To use the Key Magic procedure, please follow the instructions outlined below:

1. Use the MODE key to select the relevant device key.

2. Hold down the MAGIC key until the light blinks once and then twice and stays lid.

3. Enter the code 994, the light blinks twice.

4. Press the Magic key once

5. Enter the code of the required function, see below.

6. Press the One For All key you wish to assign the function to.

7. The light blinks twice and that key should now function.

Please note:

The MODE key, CombiControl key and Magic key cannot be programmed.

The functions listed here might not all be compatible with your specific make and model.

Programming a function that does not exist on the original remote control might cause

malfunction or damage for which One For All cannot be held responsible.

How can I set up a device if I do not have a code?

If you do not have a code for your device, then you can:

Use the "Find your setup code" tool and enter the exact make and model number of your

device.

Use the learning feature of your universal remote control to copy the functions from the

original remote control. To use the learning feature, please refer to the user manual of

your One For All remote control or read the related articles in our online knowledge base.

However we advise you to contact your local support on the following

website:(https://www.oneforall.com/support/universal-remotes).

Scroll down and click on the flag of your country to contact our local support team.

How do I program my code on my Essence remote?

To program the basic code on your Essence remote, please follow the instructions mentioned

below:

1. Hold down MAGIC until the light blinks once and then twice and stays on.

2. Press the MODE key to select the relevant device key.

3. Enter the code, the light will blink twice.

4. You can now operate your device.

If the LED does not blink twice at the end, please try the following

1. Hold down MAGIC until the light blinks once and then twice and stays on.

2. Press the MODE key to select the relevant device key.

3. Enter 992, the light will blink twice.

4. Press the Magic key once, the light blinks once.

5. Press the Magic key again, the light will blink twice.

6. You can now set up the device code.

The Find your Setup Code Tool indicates that the code for my device is not in the memory of my

remote, what do I need to do?

To resolve this problem we can offer you the following two solutions:

1. Learning feature

2. Upgrade service

1. LEARNING FEATURE: Your One For All remote is capable of copying functions straight from the original

remote control that came with your device. To use the learning feature, please refer to the user manual

of your One For All remote control or read the related articles in our online knowledge base.

2. UPGRADE SERVICE: Because of the quick changing technology we can’t always ensure that the latest

codes will be stored in the memory of your One For All remote. Some codes will be created after the

release of the remote or the memory of the remote is limited, so that we choose only the most popular

codes. To ensure a working remote we offer the upgrade service, which is free of charge (for both

upgrade and postage back) within the first year of purchasing your One For All remote, provided you still

have the proof of purchase.

If your remote has been purchased more than 1 year ago, or if you do not have the proof of purchase

anymore, the upgrade service is still possible for an additional fee. If you would like to make use of this

service, then you need to send in your One For All remote control and our technicians will program the

missing code for you. This upgrade process takes a few days and we will send your One For All remote

programmed back to you.

However we advise you to contact your local support on the following

website:(https://www.oneforall.com/support/universal-remotes).

Scroll down and click on the flag of your country to contact our local support team.

Where can I find the right code for my device, to install onto my One For All remote?

If you are looking for your set up code, click here to open our "Find your setup code" tool and enter the

exact make and model number of your device.

You can also refer to the code list in the back of the user manual.

Which code can I use to operate my Apple TV 4?

The Apple TV 4 supports Apple TV remotes from previous generations as well, for which setup code

1115 is created.

Should the Apple TV not respond with the above mentioned code, the TV4 also has the capability to

learn commands from a remote.

This way, you can setup the One For All remote for usage. Please refer to the documentation of your

Apple TV 4 for instructions.

Which device key do I use on my Essence remote for Freeview?

On the Essence, the SAT key should be used for programming the Freeview.

Which device key on the Essence 4 do I use for DVD-Home Cinema?

On the Essence 4, you can use the DVD or AMP key for your DVD-Home Cinema.

After programming the set-up code, please test the volume keys.

Also please check if the 1-0 keys change the inputs and if play and stop work correctly with the DVD-

Home Cinema.

Autres manuels pour Essence 4

Table des matières

Autres manuels One Forall Télécommande

One Forall

One Forall URC 7115 Manuel utilisateur

One Forall

One Forall URC-4110 Manuel utilisateur

One Forall

One Forall XsightTouch Manuel utilisateur

One Forall

One Forall URC-6420 Guide de l'administrateur

One Forall

One Forall URC 7145 Manuel utilisateur

One Forall

One Forall LG URC-1311 Manuel utilisateur

One Forall

One Forall URC-7140 Manuel utilisateur

One Forall

One Forall URC 7120 Manuel utilisateur

One Forall

One Forall URC-4913 Manuel utilisateur

One Forall

One Forall URC-4220 Manuel utilisateur

One Forall

One Forall URC-3435 Manuel utilisateur

One Forall

One Forall URC-4021 Manuel utilisateur

One Forall

One Forall WM4440 Manuel utilisateur

One Forall

One Forall SmartControl URC-7960 Manuel utilisateur

One Forall

One Forall URC-9040 Manuel utilisateur

One Forall

One Forall URC 1912 Manuel utilisateur

One Forall

One Forall URC 1910 Manuel utilisateur

One Forall

One Forall ONE FOR ALL PVR 6 Manuel utilisateur

One Forall

One Forall URC 7120 Manuel utilisateur

One Forall

One Forall Essence 6 Device Manuel utilisateur

One Forall

One Forall URC-4220 Manuel utilisateur

One Forall

One Forall URC 7115 Manuel utilisateur

One Forall

One Forall URC-4911 Manuel utilisateur

One Forall

One Forall URC-7140 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation