Omron WS02-NCTC1-E - 07-2001 Manuel utilisateur

WS02-NCTC1-E CX-Position

Operation Manual

Produced July 2001

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

!Caution

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to

an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PC” means Programmable Controller and it is not used as the abbreviation for any-

thing else.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

Notation

In this manual, the following conventions are used to describe screen messages and mouse/keyboard

operations.

Names of menus and menu items are indicated in bold italic, e.g., the File Menu.

Names of keys and buttons are indicated in bold (usually followed by “Key”or “Button”), e.g., Tab Key

and OK Button.

Dialog box and window names are indicated with capitalization, e.g., the Search Dialog Box.

The levels of items in menu hierarchies are distinguished with back-slashes. For example, “Select File/

New”tells the reader to select New from the File Menu.

The “+”sign is used to indicate that keys are pressed simultaneously. For example, “Press the Ctrl+S

Keys”tells the reader to press the SKey while holding down the Ctrl Key.

Copyrights

Windows is a registered trademark of the Microsoft Corporation. VS-FlexGrid Pro is a product of

Bunka Orient. Co., Ltd. (Copyright VideoSoft Corporation, 2000). Other system and product names

used in this manual are the trademarks or registered trademark of the respective companies.

OMRON, 2001

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

vii

TABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

2 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

3 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

4 Application Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii

5 Operating Environment Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

SECTION 1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1-3 List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1-4 Comparison with SYSMAC-NCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1-5 Basic Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

SECTION 2

Setup and Basic Procedures . . . . . . . . . . . . . . . . . . . . . . . . . 9

2-1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2-2 Connecting to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2-3 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SECTION 3

Creating New Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3-1 Creating New Projects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3-2 Adding and Deleting PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3-3 Adding and Deleting NC Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3-4 Automatic NC Unit Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

SECTION 4

Editing Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4-2 Setting Editing Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

4-3 Editing Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

4-4 Editing Sequence Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

4-5 Editing Speed Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

4-6 Editing Acceleration/Deceleration Time Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

4-7 Editing Dwell Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

4-8 Editing Zone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

viii

TABLE OF CONTENTS

SECTION 5

Saving and Reading Projects. . . . . . . . . . . . . . . . . . . . . . . . . 63

5-1 Saving Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

5-2 Reading Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

SECTION 6

Online Connection Default Configurations. . . . . . . . . . . . . 67

6-1 Default Configurations for Connecting Online. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

6-2 FinsGateway Configuration and Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

SECTION 7

Transferring and Verifying Data . . . . . . . . . . . . . . . . . . . . . 73

7-1 Downloading Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

7-2 Uploading Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

7-3 Verifying Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

7-4 Writing Data to Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

SECTION 8

Monitoring NCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

8-1 Monitoring NCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

8-2 Multiple Unit Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

8-3 Operating Memory Area Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

8-4 Operating Data Area Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

SECTION 9

Printing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

9-1 Printing Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

SECTION 10

Error Logs and Troubleshooting . . . . . . . . . . . . . . . . . . . . . 91

10-1 NC Unit Error Logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

10-2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

About this Manual:

This manual describes the specifications and operation of the WS02-NCTC1-E CX-Position software

and includes the sections described below. The CX-Position runs on Windows 95, 98, 2000, or NT

operating systems and is used to create data for and monitor the operation of the CS1W-NC

@@@

and

CJ1W-NC

@@@

Position Control Units (referred to as NC Units in this manual).

Please read this manual carefully and be sure you understand the information provided before

attempting to install and operate CX-Position. Please read the following manuals carefully and be sure

you understand the information provided before using a Position Control Unit.

Section 1 provides an overview of CX-Position, its functions, and the system configuration in which it

is used.

Section 2 provides information about CX-Position installation, connecting to the PC, and basic operat-

ing procedures

Section 3 describes the procedures for creating new projects, as well as those for adding and deleting

Programmable Controllers (PCs) and Position Control Units (NCs).

Section 4 describes the procedures used to edit settings

Section 5 provides information about saving and reading files.

Section 6 provides information on default configurations for connecting online.

Section 7 provides information on data transfer and verification operations between the CX-Position

and NC Units, and about operations for writing data transferred to NC Units into the NC Unit flash

memory.

Section 8 provides information about monitoring NC Units. The NC Unit’s current positions, error

codes, and status are displayed on the NC Monitor. Monitor Units are also available, displaying

sequence numbers and current positions for up to four Units simultaneously. Operating memory area

monitoring, operating data area monitoring, and NC Unit error logs can also be displayed. For details

on NC error log display, refer to 10-1 NC Unit Error Logs.

Section 9 provides information about printing data.

Section 10 provides information about NC Unit error log displays and troubleshooting.

NC Unit model number Manual name Cat. No.

CS1W-NC113/213/413/133/233/433 CS1W-NC113/213/413/133/233/433

Position Control Units Operation Manual

W376

CJ1W-NC113/213/413/133/233/433 CJ1W-NC113/213/413/133/233/433

Position Control Units Operation Manual

W397

!WARNING

Failure to read and understand the information provided in this manual may result in per-

sonal injury or death, damage to the product, or product failure. Please read each section

in its entirety and be sure you understand the information provided in the section and

related sections before attempting any of the procedures or operations given.

PRECAUTIONS

This section provides general precautions for using CX-Position and related devices.

The information contained in this section is important for the safe and reliable application of CX-Position. You must

read this section and understand the information contained before attempting to set up or operate the CX-Position.

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

2 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

3 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

4 Application Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

5 Operating Environment Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

xii

Intended Audience 1

1 Intended Audience

This manual is intended for the following personnel, who must also have

knowledge of electrical systems (an electrical engineer or the equivalent).

•Personnel in charge of installing FA systems.

•Personnel in charge of designing FA systems.

•Personnel in charge of managing FA systems and facilities.

2 General Precautions

The user must operate the product according to the performance specifica-

tions described in the operation manuals.

Before using the product under conditions which are not described in the

manual or applying the product to nuclear control systems, railroad systems,

aviation systems, vehicles, combustion systems, medical equipment, amuse-

ment machines, safety equipment, and other systems, machines, and equip-

ment that may have a serious influence on lives and property if used

improperly, consult your OMRON representative.

Make sure that the ratings and performance characteristics of the product are

sufficient for the systems, machines, and equipment, and be sure to provide

the systems, machines, and equipment with double safety mechanisms.

This manual provides information for using CX-Position. Be sure to read this

manual before attempting to use CX-Position and keep this manual close at

hand for reference during operation.

!WARNING

It is extremely important that CX-Position and related devices be used for the

specified purpose and under the specified conditions, especially in applica-

tions that can directly or indirectly affect human life. You must consult with

your OMRON representative before applying CX-Position and related devices

to the above mentioned applications.

3 Safety Precautions

!WARNING

Never attempt to disassemble any Units while power is being supplied. Doing

so may result in serious electric shock.

!WARNING

Never touch any of the terminals while power is being supplied. Doing so may

result in serious electric shock.

!Caution

Save parameters and other data to flash memory after transferring them to

the Position Control Unit (referred to as NC Units in this manual). If parame-

ters and other data are not saved to flash memory, data will return to their pre-

vious values the next time power is turned ON, possibly resulting in Unit

malfunction.

!Caution

Confirm the safety of the destination node before transferring parameters or

other data to the node. Transferring parameters or other data without confirm-

ing safety may result in injury.

!Caution

Do not save data to flash memory during memory operation or while the

motor is running. Doing so may result in unexpected operation.

xiii

Application Precautions 4

4 Application Precautions

!Caution

Observe the following precautions when using CX-Position.

•Confirm the unit number before transferring parameters and other data to

an NC Unit.

•Confirm that set parameters and data operate properly before using in

actual operation.

•When the settings of the following parameters have been changed, they

must be transferred to the NC Unit and written to flash memory, and then

the NC Unit must be turned OFF and back ON, or restarted as a Special I/

O Unit, to enable using the new settings.

•Output pulse selection

•Limit input signal type

•Origin proximity input signal type

•Origin input signal type

•Emergency stop input function

•No-origin specification

•Operating mode selection

•Origin search operation

•Origin detection method

•Origin search direction

•Do not turn OFF the power to an NC Unit while writing to flash memory.

Doing so may damage flash memory.

•Confirm that no adverse effect will occur in the system before attempting

any of the following. Not doing so may result in unexpected operation.

•Changing the operating mode of the PC.

•Changing the present value of any word or any set value in memory.

•Force-setting/force-resetting any bit in memory.

•Do not turn OFF the power to the computer while installing or uninstalling

CX-Position. Doing so may corrupt computer data.

Autres manuels pour WS02-NCTC1-E - 07-2001

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Logiciel

Omron

Omron FLEXXPECT-GLUE BEAD Manuel utilisateur

Omron

Omron CX-PROCESS TOOL V5.2 - 12-2009 Manuel utilisateur

Omron

Omron CX-MOTION-NCF - V1.8 Manuel utilisateur

Omron

Omron NS-CXDC1-V3 Manuel utilisateur

Omron

Omron CX-SUPERVISOR 3.1 - NET INTERFACE Manuel utilisateur

Omron

Omron EST2-2C-MV4 Manuel utilisateur

Omron

Omron NS - Manuel utilisateur

Omron

Omron CX-SUPERVISOR V3 Manuel utilisateur

Omron

Omron NS-CXDC1-V1 Manuel utilisateur

Omron

Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Manuel de référence

Omron

Omron FLEXXPECT-PICKING Manuel utilisateur

Omron

Omron CX-PROGRAMMER V9 - REV 12-2009 Manuel utilisateur

Omron

Omron ZEN-SOFT01-V4 - 12-2008 Manuel utilisateur

Omron

Omron MCH Manuel utilisateur

Omron

Omron CX-PROGRAMMER V8.1 Manuel utilisateur

Omron

Omron WS02-SIMC1-E - V1.9 REV 02-2009 Manuel utilisateur

Omron

Omron FLEXXPECT-PHARMA Manuel utilisateur

Omron

Omron CX-ONE - INTRODUCTION GUIDE Manuel de référence

Omron

Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Manuel utilisateur

Omron

Omron CX-PROGRAMMER 5 Manuel utilisateur

Omron

Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manuel utilisateur

Omron

Omron CX-MOTION-NCF - V1.9 Manuel utilisateur

Omron

Omron WS02-LCMC1-EV2 - 01-2007 Manuel utilisateur

Omron

Omron NS-RUNTIME - SOFTWARE Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur