Omron WS02-NSFC1-EV3 - 12-2007 Manuel utilisateur

Face Plate Auto-Builder for NS

(Ver. 3.1)

Cat. No. W418-E1-05

SYSMAC

WS02-NSFC1-EV3

OPERATION MANUAL

WS02-NSFC1-EV3

Face Plate Auto-Builder for NS

(Ver. 3.1)

Operation Manual

Revised December 2007

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

!WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

!Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to

an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in some Program-

ming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 2003

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

vii

TABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

2 General Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

4 Application Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

SECTION 1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1 Features of the Face Plate Auto-Builder for NS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1-3 Application Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

1-4 Upgrades Made for Version 2.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1-5 Upgrades Made for Version 3.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1-6 Upgrades Made for Version 3.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SECTION 2

Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2-1 Installation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2-2 Uninstalling the Face Plate Auto-Builder for NS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SECTION 3

Basic Operation Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3-1 Basic Operation Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SECTION 4

Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4-1 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4-2 Merging Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

SECTION 5

Basic Specifications of Created Screens . . . . . . . . . . . . . . . . 25

5-1 Created Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5-2 Screen Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5-3 Tuning Screen Realtime Trends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5-4 Engineering Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5-5 Percent Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5-6 Read Address and Write Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5-7 Work Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

viii

TABLE OF CONTENTS

SECTION 6

Creation Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6-1 Basic PID (Block Model 011) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6-2 Advanced PID (Block Model 012) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

6-3 Two-position ON/OFF (Block Model 001) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6-4 Three-position ON/OFF (Block Model 002). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6-5 Indication and Operation (Block Model 032) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

6-6 Indicator (Block Model 034) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

6-7 Segment Program 2 (Block Model 157) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

6-8 Indication and Setting (Block Model 031) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

6-9 Ratio Setting (Block Model 033). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

6-10 High/Low Alarm (Block Model 111) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

6-11 Timer (Block Model 205) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

6-12 Counter (Block Model 208). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

6-13 ON/OFF Valve Manipulator (Block Model 221). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

6-14 Motor Manipulator (Block Model 222). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

6-15 Reversible Motor Manipulator (Block Model 223). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

6-16 Motor Opening Manipulator (Block Model 224) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

6-17 Blended PID (Block Model 013). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

6-18 Batch Flowrate Capture (Block Model 014) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

6-19 Segment Program 3 (Block Model 158) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

About this Manual:

This manual describes the installation and operation of the WS02-NSFC1-EV2 Face Plate Auto-

Builder for NS. The Face Plate Auto-Builder for NS is a software package used to automatically build

project files for the CS1W-LC001 Loop Control Unit, the CS1W-LCB01 and CS1W-LCB05 Loop Con-

trol Boards, CS1D-CPU@@P Process-control CPU Units, and CJ1W-CPU@@P Loop Control CPU

Units used with NS-series Programmable Terminals. These files are based on the tag files created

using CX-Process Tool.

The project files that are created are configured using the Face Plate Screens for the Loop Control

Unit.

Please read this manual carefully and be sure you understand the information provided before

attempting to install and operate the Face Plate Auto-Builder for NS. Please read the following manuals

carefully and be sure you understand the information provided before setting up the Loop Control Unit/

Board and NS-series PT System

Manuals Related to the Loop Control Unit/Board

Product Manual name Cat. No. Contents

WS02-NSFC1-E

Face Plate Auto-

Builder for NS

Face Plate Auto-Builder

for NS

Operation Manual

W418 (this manual) Installation and operation procedure for

Face Plate Auto-Builder for NS.

WS02-LCTC1-EV3

CX-Process Tool

Operation Manual

W372 Installation and operation procedures

for the CX-Process Tool.

CXONE-AL@@C-E

CX-One FA Integrated

Tool Package

CX-One

Setup Manual

W444 Provides an outline of the CX-One FA

Integrated Tool Package and the instal-

lation procedure. Refer to this manual

when installing software contained in

the CX-One FA Integrated Tool Pack-

age.

WS02-LCTC1-E

CX-Process Monitor

Operation Manual

W373 Installation and operation procedures

for the CX-Process Monitor.

WS02-LCMC1-E

CX-Process Monitor

Plus

CX-Process Monitor Plus

Operation Manual

W428 Installation and operation procedures

for the CX-Process Monitor Plus.

CS1W-LC001

Loop Control Unit

Operation Manual

W374 Installation and operation procedures

for the Loop Control Unit (except for

function blocks).

CS1W-LCB01/05

CS1D-CPU@@P

Loop Control Boards

Loop Control Board

Operation Manual

W406 Installation and operation procedures

for the Loop Control Boards (except for

function blocks).

CS1W-LC001

Loop Control Unit

Function Block Reference

Manual

W375 Detailed information on function blocks

for Loop Control Units.

CS1W-LCB01/05

CS1D-CPU@@P

Loop Control Boards

Loop Control Board

Function Block Reference

Manual

W407 Detailed information on function blocks

for Loop Control Boards

Manuals Related to the NS-series PT

Product Manual name Cat. No. Contents

WS02-NSFC1-E

Face Plate Auto-

Builder for NS

Face Plate Auto-Builder

for NS

Operation Manual

W418 (this manual) Installation and operation procedure for

Face Plate Auto-Builder for NS.

WS02-LCTC1-EV3

CX-Process Tool

Operation Manual

W372 Installation and operation procedures

for the CX-Process Tool.

WS02-LCTC1-E

CX-Process Monitor

Operation Manual

W373 Installation and operation procedures

for the CX-Process Monitor.

WS02-LCMC1-E

CX-Process Monitor

Plus

CX-Process Monitor Plus

Operation Manual

W428 Installation and operation procedures

for the CX-Process Monitor Plus.

NS-CXDC1-V2

CX-Designer Ver. 2.0

CX-Designer

User's Manual

V088 Operating procedures for the CX-

Designer.

NS12-series, NS10-

series, NS8-series,

NS5-series PT

NS-series PT

Setup Manual

V083 Setup procedures for NS-series PTs.

NS12-series, NS10-

series, NS8-series,

NS5-series PT

NS-series PT

Programming Manual

V073 Descriptions of NS-series PT functions.

!WARNING Failure to read and understand the information provided in this manual may result in per-

sonal injury or death, damage to the product, or product failure. Please read each section

in its entirety and be sure you understand the information provided in the section and

related sections before attempting any of the procedures or operations given.

Read and Understand this Manual

Please read and understand this manual before using the product. Please consult your OMRON

representative if you have any questions or comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a

period of one year (or other period if specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-

INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE

PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which

liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS

REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS

WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO

CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Logiciel

Omron

Omron CXONE-ALC-V4 - 10-2010 Manuel utilisateur

Omron

Omron CX-SERVER LITE Manuel utilisateur

Omron

Omron CX-ONE V1.1 - SETUP 11-2005 Guide de l'utilisateur

Omron

Omron HEALTH MANAGEMENT SOFTWARE - HELP Manuel utilisateur

Omron

Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Manuel utilisateur

Omron

Omron CX-SUPERVISOR - V2.0 Manuel utilisateur

Omron

Omron CX-MOTION-NCF - V1.8 Manuel utilisateur

Omron

Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manuel utilisateur

Omron

Omron CX-MOTION - 06-2008 Manuel utilisateur

Omron

Omron CX-SUPERVISOR 3.1 - NET INTERFACE Manuel utilisateur

Omron

Omron FB LIBRARY - Guide de l'utilisateur

Omron

Omron NS-CXDC1-V3 - REV 10-2010 Manuel utilisateur

Omron

Omron THERMOTOOLS Manuel utilisateur

Omron

Omron CX-ONE - INTRODUCTION GUIDE Manuel de référence

Omron

Omron CX-PROGRAMMER 5 Manuel utilisateur

Omron

Omron CX-ONE V4 Manuel utilisateur

Omron

Omron SYSMAC Gateway Manuel utilisateur

Omron

Omron CX-MOTION-NCF - V1.9 Manuel utilisateur

Omron

Omron SYSMAC WS02-NSFC1-E Guide de l'utilisateur

Omron

Omron SFC - INTRODUCTION GUIDE Manuel de référence

Omron

Omron CX-DESIGNER V2.1 - 07-2007 Manuel utilisateur

Omron

Omron ONE SOFTWARE - Manuel utilisateur

Omron

Omron NS - Manuel utilisateur

Omron

Omron CX-INTEGRATOR - V1.1 Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur