Omron CX-SUPERVISOR - V2.0 Manuel utilisateur

Cat. No. W10E-EN-01

CX-Supervisor

Software Release 2.0

USERS MANUAL

Cat. No. W10E-EN-01 Note: Speciﬁcations subject to change without notice.

Authorized Distributor:

Printed in Europe

Cat. No. W10E-EN-01 CX-Supervisor Software Release 2.0 USERS MANUAL

CX-Supervisor

User Manual

Software Release 2.0

OMRON CX-Supervisor – User Manual

Revision 2.0 Page i

Notice

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided in them. Failure to heed precautions can result in injury to people or

damage to the product.

DANGER! Indicates information that, if not heeded, is likely to result in loss of life or

serious injury.

WARNING Indicates information that, if not heeded, could possibly result in loss of

life or serious injury.

Caution Indicates information that, if not heeded, could result in relatively serious

or minor injury, damage to the product, or faulty operation.

OMRON Product References

All OMRON products are capitalised in this manual. The word “Unit” is also capitalised when it

refers to an OMRON product, regardless of whether or not it appears in the proper name of the

product.

The abbreviation “PLC” means Programmable Logic Controller and is not used as an abbreviation

for anything else.

CX-Supervisor – User Manual OMRON

Page ii Revision 2.0

OMRON CX-Supervisor – User Manual

Revision 2.0 Page iii

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note: Indicates information of particular interest for efficient and convenient

operation of the product.

1, 2, 3… Indicates lists of one sort or another, such as procedures, checklists etc.

Represents a shortcut on the Toolbar to one of the options available on the

menu of the same window.

Indicates a program must be started, usually by clicking the appropriate

option under the standard Windows ‘Start’ button.





OMRON, 2007

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or

otherwise, without the prior written permission of OMRON.

All copyright and trademarks acknowledged.

No patent liability is assumed with respect to the use of the information contained herein. Moreover,

because OMRON is constantly striving to improve its high-quality products, the information

contained in this manual is subject to change without notice. Every precaution has been taken in the

preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

CX-Supervisor – User Manual OMRON

Page iv Revision 2.0

OMRON CX-Supervisor – User Manual

Revision 2.0 Page v

About this Manual

This manual describes the CX-Supervisor application and its ability to create, modify and run

SCADA applications.

This manual contains the following:

Chapter 1 - Graphics Editor. This chapter describes the Graphics Editor and its various tools and

controls.

Chapter 2 - Pages. This chapter describes the procedures involved in the creation and amendment of

pages.

Chapter 3 - Points. This chapter describes the procedures involved in the creation, amendment and

removal of points. The use of PLCs with points is also described.

Chapter 4 - Objects. This chapter describes procedures involved in the creation, amendment and

removal of objects.

Chapter 5 - ActiveX Objects. This chapter provides an overview of using ActiveX objects in CX-

Supervisor.

Chapter 6 - Projects. This chapter describes procedures involved in the creation, amendment and

removal of projects.

Chapter 7 - Graphics Library. This chapter describes the library of graphic objects and how to

create and amend new libraries.

Chapter 8 - Alarms. This chapter describes the procedures involved in the creation and amendment

of alarms.

Chapter 9 - Animation. This chapter describes the use of animations and how they can be applied to

a CX-Supervisor project.

Chapter 10 - Recipes. This chapter describes the creation of recipes, and how they can be used.

Chapter 11 - Data Logging. This chapter describes the data logging facilities, including setting up,

viewing and exporting

Chapter 12 - Databases. This chapter describes the Database facilities, including connections reading

and writing data.

Chapter 13 - Multilingual Features. This chapter describes the Multilingual features, including

creation of dynamically switching applications.

Chapter 14 - OPC Client. This chapter introduces OPC Server to a new user, and explains how to use

CX-Supervisor as an OPC Client

CX-Supervisor – User Manual OMRON

Page vi Revision 2.0

Chapter 15 - Connecting to a Remote CX-Supervisor application. This chapter explains how to

create a distributed solution by connecting together CX-Supervisor applications on networked

PCs.

Chapter 16 - Connecting to Omron Industrial Components. This chapter details connecting CX-

Supervisor to Omron's Industrial Components.

Chapter 17 – Best Practices. This chapter details the best practices to get the most from CX-

Supervisor including how to plan and design your application.

Appendix A – Configuring a PC for remote connection. The appendix explains how to configure a

PC for remote connection.

Appendix B – Frequently asked questions. The appendix list some FAQs, and of course their

answers.

Appendix C – Troubleshooting. The appendix is a guide to troubleshooting and resolving problems.

Appendix D – CX-Server error codes. The appendix lists the error codes from the communication

software, CX-Server, and their meanings.

Appendix E – Using with the Omron DyaloX. The appendix lists information when using with the

Omron’s DyaloX Industrial PC.

Appendix F – Obsolete Features. The appendix details obsolete features for backwards

compatibility only.

A Glossary of Terms and Index are also provided.

OMRON CX-Supervisor – User Manual

Revision 2.0 Page vii

TABLE OF CONTENTS

CX-Supervisor ..................................................................................................Page

Chapter 1 - Graphics Editor.......................................................... 1

About the Graphics Editor ...................................................................................... 1

Palette .................................................................................................................... 1

Graphic Object Bar................................................................................................. 4

Control Bar ............................................................................................................. 4

Status Bar............................................................................................................... 8

Text Bar .................................................................................................................. 9

Grid....................................................................................................................... 11

Chapter 2 - Pages.......................................................................... 13

Creating a Page.................................................................................................... 13

Amending a Page................................................................................................. 14

Defining the Properties of a Page ........................................................................ 14

Printing a Page..................................................................................................... 16

Saving a Page to a Project................................................................................... 20

CX-Supervisor Preferences.................................................................................. 20

Chapter 3 - Points......................................................................... 23

What is a Point? ................................................................................................... 23

About the Point Editor .......................................................................................... 23

Viewing Points via the Point Editor....................................................................... 24

Creating a Point.................................................................................................... 27

Amending an Existing Point ................................................................................. 33

Deleting an Existing Point .................................................................................... 34

Quick creation of many points .............................................................................. 35

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Logiciel

Omron

Omron NS - Manuel utilisateur

Omron

Omron NQ HMI Manuel utilisateur

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS V4 Manuel utilisateur

Omron

Omron NS-RUNTIME - SOFTWARE 2007 Manuel utilisateur

Omron

Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Manuel utilisateur

Omron

Omron CX-MOTION Manuel utilisateur

Omron

Omron NS-CXDC1-V3 Manuel utilisateur

Omron

Omron CX-ONE - SETUP 02-2009 Guide de l'utilisateur

Omron

Omron HEALTH MANAGEMENT SOFTWARE - HELP Manuel utilisateur

Omron

Omron WS02-SIMC1-E - V1.9 REV 02-2009 Manuel utilisateur

Omron

Omron CX-DESIGNER V2.1 - 07-2007 Manuel utilisateur

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS 95-98 V3.2 Manuel utilisateur

Omron

Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Manuel utilisateur

Omron

Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manuel utilisateur

Omron

Omron CX-PROGRAMMER 5.0-FUNCTION BLOCK OPERATION Manuel utilisateur

Omron

Omron ZEN-SOFT01-V4 - 12-2008 Manuel utilisateur

Omron

Omron SENSOR SUPPORT SOFTWARE S3 Manuel utilisateur

Omron

Omron CX-PROGRAMMER V9 Manuel utilisateur

Omron

Omron FLEXXPECT-GLUE BEAD Manuel utilisateur

Omron

Omron CX-INTEGRATOR V2 - 12-2009 Manuel utilisateur

Omron

Omron CX-INTEGRATOR - V2.3 REV 02-2009 Manuel utilisateur

Omron

Omron CX-PROCESS TOOL V5.2 - 12-2009 Manuel utilisateur

Omron

Omron CX-DESIGNER - INTRODUCTION GUIDE Manuel de référence

Omron

Omron VISION COMPOSER Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur