Omron ZW Series Guide de l'utilisateur

Confidential C

AST*-******

ZW Series

For EtherCAT

BECKHOFF PLC

＋

Vision Sensor

Start-up Guide

Rev.A

OMRON Corporation

Application Sensors Division

Development Department

Confidential C

AST*-******

Contents

1. Introduction..........................................................................1

1.1. Outline ............................................................................1

1.2. Object reader..................................................................2

2. Target product......................................................................3

2.1. Target product.................................................................3

2.2. Equipment configuration.................................................5

3. Start-up procedure...............................................................7

3.1. Start-up procedure..........................................................7

3.2. Prerequisite ....................................................................8

4. Configuration of EtherCAT .................................................9

4.1. Hardware configuration of ZW......................................10

4.2. Setting of TwinCAT....................................................... 11

4.3. Confirmation of communication status.........................42

5. Reference............................................................................44

6. Caution................................................................................45

6.1. Explanation about the indications ................................45

7. Revison history..................................................................46

Confidential C

AST*-******

Refusal

（1）Apart of the factors of this, start-up guide or everything is copied, reproduced without

permission, and it is prohibited to reprint.

（2）Because the specifications etc. might be changed without a previous notice for the factors of this,

start-up guide for the improvement. Please acknowledge it beforehand.

About the copyright and the trademark

・EtherCAT is registered trademark and patented technology, licensed by BeckhoffAutomation

GmbH, Germany.

・

The system name and the description of product published in the other and the text are the

trademarks or registered trademarks of each company respectively.

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

1. Introduction

1.1. Outline

This material explains the configuration steps required for the launch of ZW series and

BECKHOFF TwinCAT that you connected to in EtherCAT.

The man-hour of the start-up can be greatly reduced by using this material when starting up.

Detailed setup steps are not described for the following items. It describes to “5. Reference

information”. Please refer to the information.

•Setting method of FQ-M measurement items.

•Setting method and manner of operation ladder program with Twin CAT PLC Control.

•Communication command using EtherCAT.

Reference

What is EtherCAT?

EtherCAT is a super-high-speed fieldbus of the Ethernet base.

The communications zone of 100Mbps full duplex is used to its maximum, and it controls at

high speed of the motor driver such as the servo drivers and inverters.

In addition, not only the driver control but also a real-time control of various I/O like the sensor

and analog I/O, etc. : 1 It achieves it by the horn communication.

Moreover, an accurate synchronous control of accuracy 1μs or less is possible by sharing

time information among connected slaves.

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

1.2. Object reader

This material connects displacement sensor ZW with positional control NC unit with EtherCAT,

and targets wanting do the measurement processing control by the memory driving.

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

2. Target product

2.1. Target product

Confocal Fiber Type displacement sensor

Name Model Version

ZW Controller for Displacement Sensor ZW-CE10

ZW-CE10T

ZW-CE15

ZW-CE15T

ZW Sensor Head for Fiber Coaxial

displacement sensor ZW-S07

ZW-S20

ZW-S30

ZW-S40

Cable Name Model Version

EtherCAT Communication cable *1

(RJ45/RJ45) XS6W-6LSZH8SS□□□CM-Y

XS5W-T421-□MD-K

EtherCAT Communication cable *1

(M12/RJ45, M12 L/RJ45) XS5W-T421-□MC-K

XS5W-T422-□MC-K

*1：EtherCAT Communication cable specification

•Ethernet twisted-pair cable：STP of CAT5 or more.

•Wiring is straight.

•The shielded is a double cover of the aluminum tape and the braid.

•The shielded of the cable is connected with the shielded of both ends and the connector. (both

ends grounding)

Moreover, please use the cable length between TwinCAT and ZW, between ZW and ZW within

100m.

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

Peripheral Name Model Version

TwinCAT －

2.11 R3, Build

2238

PLC unit (Beckhoff)

Name Model Version

Basic CPU Module CX1030-0123 -

DVI/USB CX1030-N010 -

Ethernet×2 CX1030-N000 -

Power Supply CX1100-0014 -

EtherCAT Master unit EK1110 -

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

2.2. Equipment configuration

2.2.1. Equipment configuration

This material has described the start-up procedure when the following equipment

configuration is assumed to be an example.

①PC(TwinCAT) - ZW

Precautions for correct use

There are times when it does not work by the network adapter and the PC is going to be used

for the TwinCAT.

Please use it after confirming that the TwinCAT to operate on the network adapter and your

PC.

Confidential C

AST*-******

Error! Reference source not found. Error! Reference source not found.

②PC(TwinCAT) – PLC – ZW

BECKHOFF PLC: Power input method

* When using the TwinCAT, ESI file for ZW will be required separately.

Please download from the following website.

http://www.fa.omron.co.jp/member/product/tool/23/esi/index.htm

＜

FQ-M Sensor (EtherCAT Slave)

＞

It corresponds to the slave of EtherCAT network.

＜

＞

EtherCAT network and the EtherCAT master are set.

Confidential C

AST*-******

3Start-up procedure

3. Start-up procedure

3.1. Start-up procedure

This article describes the steps for using Fieldbus of the ZW "EtherCAT", connecting the ZW

and TwinCAT (BECKHOFF).

＜What can be identified using this material＞

(1) How to set up confirmation to use the EtherCAT function

Confirmation of ZW and TwinCAT System Manager

Reference

This document is described for instructions on how to connect to establish communication. It

is not described

how to wire the operation of procedures other than connection, and

installation. This document is not also described with respect to the operation and function of

the device. Please refer to the instruction manual, please contact OMRON.

Autres manuels pour ZW Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Matériel réseau

Omron

Omron EJ1 - 07-2008 Manuel utilisateur

Omron

Omron G70A Manuel utilisateur

Omron

Omron FLOW EM2100 Manuel utilisateur

Omron

Omron E2E series Mode d’emploi

Omron

Omron CJ Series Mode d’emploi

Omron

Omron Promi-SD Manuel utilisateur

Omron

Omron CJ1W-ETN21 - 04-2009 Manuel utilisateur

Omron

Omron DEVICENET SAFETY - 03-2008 Manuel utilisateur

Omron

Omron DEVICENET SAFETY - CONFIGURATION 05-2005 Guide rapide

Omron

Omron DeviceNet DRT2-HD16C Manuel utilisateur

Omron

Omron CS1W-ETN11 Manuel utilisateur

Omron

Omron V460-H Mode d’emploi

Omron

Omron WD30-ME Manuel utilisateur

Omron

Omron CQM1H-SCB41 Manuel utilisateur

Omron

Omron 3G3MV-PDRT2 Manuel utilisateur

Omron

Omron C200HW-CLK21 Manuel utilisateur

Omron

Omron ITBC-CST01 - 09-2000 Manuel utilisateur

Omron

Omron JUNMA PULSE Manuel utilisateur

Omron

Omron DEVICENET - Manuel utilisateur

Omron

Omron CS Series Manuel utilisateur

Omron

Omron J7KNA - Manuel utilisateur

Omron

Omron CJ1W-PNT21 Manuel utilisateur

Omron

Omron DEVICENET - Manuel utilisateur

Omron

Omron 3G3AX-MX2-PRT-E Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur