Olympus SZX7 Manuel utilisateur

INSTRUCTIONS

SZX7

STEREOMICROSCOPE SYSTEM

A X 6 6 3 1

Modules described in this manual

SZ2-ST

WHSZ Series Eyepieces

Objectives

SZX-EPA

SZX-AS

SZX-STAD1

SZH-STAD1

SZ2-FO

SZH-SG

SZH-SC

This instruction manual is for the Olympus stereomicroscope system. To ensure the safety,

obtain optimum performance and to familiarize yourself fully with the use of this microscope,

we recommend that you study this manual thoroughly before operating the microscope.

Retain this instruction manual in an easily accessible place near the work desk for future

reference.

CONTENTS

IMPORTANT — Be sure to read this chapter for safe use of the equipment. —

1 NOMENCLATURE 3

1-2

Correct assembly and adjustments are critical for the microscope to manifest its full performance. If you are going

to assemble the microscope by yourself, please read Chapter 8, “ASSEMBLY” (pages 16 to 18). For the assem-

blies of the modules for which instruction manuals are available, refer to their instruction manuals.

2 CONTROLS 4

3 OBSERVATION PROCEDURE 5

4 OPERATION 6-12

5 TROUBLESHOOTING GUIDE 13

6 SPECIFICATIONS 14

7 OPTICAL PERFORMANCE 15

8 ASSEMBLY 16-18

9 OPTIONAL MODULES 19-27

4-1 Stand......................................................................................................................................................................................................................... 6

1Using the Stage 2

Adjusting the Focus Adjustment Knob Tension

4-2 Observation Tube ............................................................................................................................................................................ 6-9

1Adjusting the Interpupillary Distance 2

Adjusting the Diopter (Zoom Confocality Adjustment)

3Using the Eye Shades 4Using an Eyepiece Micrometer Disk

5Selecting the Light Path (SZX-TR30) 6Adjusting the Tilt (SZX-TBI)

4-3 Microscope Body ...................................................................................................................................................................... 10-11

1Zoom Magnification Indication 2Switching the Click Stop ON-OFF

3Using Auxiliary Sleeve SZ2-ET

4-4 TV Observation and Photomicrography.............................................................................................................. 12

SZX-EPA, SZX-AS, SZX-STAD1, SZH-STAD1, SZ2-FO, SZH-SG, SZH-SC

SZX7

IMPORTANT

SAFETY PRECAUTIONS

The SZX7 stereomicroscope is provided with the ESD (Electro-Static Discharge) protection specifications. It is provided

with electroconductive coating in the external finish to reduce the surface resistance and grounding lead wires in their

standard stand or system to eliminate static electricity from them.

CAUTION To maintain the ESD protection performance, always use the microscope in combination with the

modules described in this manual or options having the ESD protection specifications. Otherwise,

the grounding will not work properly.

1. After the equipment has been used in an observation of a specimen that is accompanied with a potential of infection,

clean the parts coming in contact with the specimen to prevent infection.

· Moving this microscope is accompanied with the risk of

dropping the specimen. Be sure to remove the specimen

before moving this product.

· Hold the bottom of the stand with one hand while holding

base column with the other hand to avoid tilting the micro-

scope.

· In case the specimen is damaged by erroneous operation,

promptly take the infection prevention measures.

2. The desktop should be a level surface with an inclination of less than 3°, and the load to the microscope should be less

than 7 kg (when the SZ2-ST standard stand is used).

The microscope may become unstable when certain intermediate attachment and/or photography unit are mounted on

it. Be careful so that the microscope does not topple down.

3. When the microscope is to be disposed of, follow your local industrial waste disposal regulations.

If you have any questions, please contact Olympus.

1Getting Ready

1. A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high temperature and humidity, dust or vibrations. (For

the operating conditions, see Chapter 6, “SPECIFICATIONS” on page 14.)

3. Do not turn the zoom adjustment knobs beyond the stopper positions. Otherwise, the internal mechanism may be

damaged.

Do not turn the left and right zoom adjustment knobs in the opposite directions, as this will result in a failure.

4. Only one intermediate attachment having thickness up to 60 mm can be mounted on the microscope. If two intermedi-

ate attachments or an intermediate attachment thicker than 60 mm is mounted, the image may be cut a little.

However, the coaxial reflected light illuminator (SZX-ILLC) is not counted in the number of intermediate attachment.

}When using multiple modules, they should be stacked in order of the SZX-ILLC, SZX-AS, SZX-RFA (SZX-RFL), SZX-SDO,

SZX-APT, SZX-BS, SZX-DA, SZX-FAD and SZX-EPA from the bottom to the top.

SZX7

3Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

2Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and

wipe gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the microscope components other than the glass components because

they use plastic resin materials extensively. To clean them, use a lint-free, soft cloth slightly moistened with a diluted

neutral detergent.

3. Do not disassemble any part of the microscope as this could result in malfunction or reduced performance.

4. When disposing of the microscope. Check the regulations and rules of your local government and be sure to

observe them.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with the requirements of directive 98/79/EC concerning in vitro diag-

nostic medical devices. CE marking means the conformity to the directive.

4Intended use

This instrument has been designed to be used to observe magnified images of specimens in routine and research

applications.

Do not use this instrument for any purpose other than its intended use.

NOMENCLATURE

*Modules marked *are given the ESD specifications.

(Note) The modules shown in the following diagram are merely the typical examples. For the modules that are not shown

below, please consult Olympus or the latest catalogues.

Eyepiece

· WHSZ10X*

· WHSZ10X-H*

· WHSZ15X-H*

· WHSZ20X*

· WHSZ20X-H*

· WHSZ30X-H*

Microscope Body

· 7X Zooming Microscope Body: SZX-ZB7*

Objective

· DFPL0.5X-4*

· DFPL0.75X-4*

· DFPLAPO1X-4*

· SZX-ACH1X*

· SZX-ACH1.25X*

· DFPL1.5X-4*

· DFPL2X-4*

Stage Plate

· Black/White: SZ2-SPBW*

(ESD protection on black surface)

· Transparent: SP-C

· Other stage adapter

Observation Tube

· Binocular Tube: SZX-BI45*

· Binocular Tube: SZX-BI30

· Trinocular Tube: SZX-TR30

· Tilting Tube: SZX-TBI

Stand

Note 1)

· Standard Stand: SZ2-ST*

· LED Illuminator Stand: SZ2-ILST

Intermediate Attachment

· AS Unit: SZX-AS

· Eye Point Adjuster: SZX-EPA

· Coaxial Reflected Light Illuminator: SZX-ILLC

Auxiliary Sleeve

· SZ2-ET*

Note 1) The microscope can also be mounted on the SZ2-STU1/STU2/STU3 large stand as well as on the SZX-ST SZX

standard stand by using the SZ2-STB1/SZ2-STS focusing arm.

SZX7

CONTROLS

Eye shades (Page 8)

Eyepiece clamping knobs

Body clamping knob

Threaded for accessory

mounting

Accessory mounting screws

(x 5)

Stage plate

Allen screwdriver

Stage adapter mounting screws

M4 screws (x 2)

Zoom magnification indication (Page 10)

Indicates 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2, 4, 5 and 5.6

Zoom adjustment knobs (Page 7)

0.8X to 5.6X

Focus adjustment knob (Page 6)

Stroke: 120 mm

Accessory mounting holes

Diameter 4 mm (x 2)

Allen screwdriver holder (Page 16)

With double-side adhesive tape.

Grounding holes (Page 16)

For 4 mm banana plugs (x 4)

Click stop ON-OFF screw (Page 10)

OBSERVATION PROCEDURE

}If you have not assembled the microscope yet, please read Chapter 8, “ASSEMBLY” (pages 16 to 18).

3-1 Preparation

(Page)

1. Confirm the mounting, particularly that of the observation tube.................................................................................................................... (P. 16 - 18)

2. Adjust the rotation tension of the focus adjustment knob. ................................................................................................................................................... (P. 6)

3. Prepare the light source as required.

3-2 Procedure

1. Place the specimen on the stage. (Page 6)

2. Adjust the interpupillary distance. (Page 6)

3. Adjust the eyepiece diopter. (Page 7)

· The adjustment operation is variable whether the eyepieces use

an eyepiece micrometer disk or not.

4. Set the zoom adjustment knob @ for the lowest magnification and rotate

the focus adjustment knob ² to bring the specimen into approximate

focus.

5. Rotate the zoom adjustment knob @ to the target magnification and

rotate the focus adjustment knob ² to bring the specimen into accurate

focus.

}When the optional AS unit (SZX-AS) is used, the contrast of image and

the focal depth of specimen can be adjusted with the aperture iris

diaphragm lever.

SZX7

OPERATION

4-1 Stand

1Using the Stage

1. When reflected light illumination is used, the stage plate can be placed

either the white or black surface facing up depending on the specimen.

However, when the ESD performance is required, always use the black

surface of the stage plate.

2. When transmitted light illumination is used, use the transparent glass

stage plate (SP-C).

Adjusting the Focus Adjustment Knob Tension

(Fig. 1)

}This operation is intended to facilitate the rotation of the knobs while

preventing spontaneous drop of the microscope body. It is recommended

to set the knob tension to a slightly higher level than the point where

spontaneous drop occurs.

1. Hold the left and right focus adjustment knobs @ with both hands, fix the

left knob and rotate the right knob. The rotation tension of the knobs

increases or decreases according to the direction in which the right knob

is rotated.

2. If the rotation tension is increased too much, accurate focusing is not

possible and the mechanism may be damaged.

4-2 Observation Tube

1Adjusting the Interpupillary Distance (Fig. 2)

#Always hold the eyepiece sleeves @ with both hands when adjust-

ing the interpupillary distance.

While holding the left and right eyepiece sleeves @ with both hands,

look through the eyepieces and adjust for binocular vision until the left

and right fields of view coincide completely.

Fig. 1

Fig. 2

To decrease

To increase

Clamp.

Adjusting the Diopter (Zoom Confocality Adjustment)

(Fig. 3)

#Confirm that the eyepiece clamping knobs @ are tightened firmly

before proceeding to the adjustment.

Eyepieces without eyepiece micrometer disk

1. Turn the diopter adjustment rings ² of the left and right eyepieces to

positions “0”. (This adjustment is not possible with eyepieces without

helicoids.)

2. Place an easy-to-observe specimen on the stage plate.

3. Set the zoom adjustment knob ³ for the lowest magnification and rotate

the focus adjustment knob | to bring the specimen into focus.

4. Set the zoom adjustment knob ³ for the highest magnification and

rotate the focus adjustment knob | to bring the specimen into focus.

5. Set the zoom adjustment knob ³ for the lowest magnification and rotate

the diopter adjustment rings ² of the left and right eyepieces, instead of

the focus adjustment knob, to bring the specimen into focus.

}Set the zoom adjustment knob ³ for the highest magnification again

and check the image focusing. The diopter adjustment is complete if the

image in accurate focus. If not, repeat steps 3 to 5 above.

Eyepieces with eyepiece micrometer disk

1. Look through the eyepiece with eyepiece micrometer disk and rotate its

diopter adjustment ring ² to bring the micrometer scale into focus.

2. Place an easy-to-observe specimen on the stage plate.

3. Set the zoom adjustment knob ³ for low magnification, look through the

eyepiece with eyepiece micrometer disk and rotate the focus adjustment

knob | to bring the specimen into focus.

4. Set the zoom adjustment knob ³ for the highest magnification, look

through the eyepiece with micrometer disk and rotate the focus adjust-

ment knob | to bring the specimen into focus.

5. Set the zoom adjustment knob ³ for the lowest magnification and rotate

the diopter adjustment ring of the eyepiece without eyepiece micrometer

disk, instead of the focus adjustment knob, to bring the specimen into

focus.

}Set the zoom adjustment knob ³ for the highest magnification again

and check the image focusing. The diopter adjustment is complete if the

image in accurate focus. If not, repeat steps 3 to 5 above.

}Note the left and right diopter scale values so that it can be quickly

duplicated in future observations.

Diopter scale of the 10X eyepieces

}The valid range of the diopter scale is between

8 and +5 but a slight

margin is added to it. Therefore, the diopter value may exceed +5 or

when it is adjusted to the maximum. In this case, whether the diopter

value is over +8 or under

5 can be identified by the length of the

eyepiece.

Fig. 3

8+5

Autres manuels pour SZX7

Table des matières

Autres manuels Olympus Microscope

Olympus

Olympus DP21 Manuel utilisateur

Olympus

Olympus BX60M Manuel utilisateur

Olympus

Olympus CHS Manuel utilisateur

Olympus

Olympus Fluoview FV1000 Manuel utilisateur

Olympus

Olympus SZ3060 Manuel utilisateur

Olympus

Olympus VS120 Manuel utilisateur

Olympus

Olympus BH2 Series Instructions d'installation

Olympus

Olympus IX2-DSU Manuel utilisateur

Olympus

Olympus CK30 Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur

Olympus

Olympus CKX41 Manuel utilisateur

Olympus

Olympus Pom Manuel utilisateur

Olympus

Olympus JM Manuel utilisateur

Olympus

Olympus U-UVF248 Manuel utilisateur

Olympus

Olympus BX51M Manuel utilisateur

Olympus

Olympus Fluoview-1000 Manuel utilisateur

Olympus

Olympus BHTU-112 Manuel utilisateur

Olympus

Olympus FLUOVIEW FV300 Guide d'installation

Olympus

Olympus SZ-ADD Manuel utilisateur

Olympus

Olympus BX2 SERIES Manuel utilisateur

Olympus

Olympus BHSP Manuel utilisateur

Olympus

Olympus SZ2-ILA Manuel utilisateur

Olympus

Olympus FV1200 MPE Manuel utilisateur

Olympus

Olympus BXFM Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Leica

Leica FL560 Manuel utilisateur