Olympus CH2 Series Mode d'emploi
OLYMPUS BIOLOGICAL MlCROSCOPE
SERIES
CH2
REPAIR MANUAL
OLYMPUS
CONTENTS
1. OUTLINE OF THE PRODUCT ............................................. 1
2. DISASSEMBLING PROCEDURE ................................. , .......... 7
3. REASSEMBLING AND ADJUSTMENT ...................................... .21
1. OUTLINE OF THE PRODUCT
CONTENTS
1. IOutlineoftheproduct .................................................... 3
2. Specifications ........................................................... 3
-l-
1. Outline of the product
Name of product: OLYMPUS Biological microscope for education and laboratory use.
Model name for internal use: CH2 Series
CHS-F
(With built-in Halogen lamp, 6V 20W)
CHT-F
(With built-in Tungsten lamp, IOOV 30W)
CHD-F
(Mirror or attachable substage illuminator LSK can be mounted.)
2. Specifications
Common items with models CHS-F, CHT-F and CHD-F
(1) Body tube mounting:
(2) Nosepiece:
(3) Stage:
(4) Focusing:
(5) Condenser carrier:
Circular dovetail/groove system.
Analyzer can be accomodated at inside of the dovetail groove.
Quadruple
Fixed plane stage
Attachable mechanical stage can be mounted.
Common axle for coarse and fine focus adjustments.
Stroke: 25 mm (Coarse and fine adjustments)
Fine focus adjustment gradation: 2.5 pm/division
Tension adjustment for coarse focus knobs
Stopper for coarse focus adjustment
Rack and pinion hight displacement
Sleeve type condenser mount, precentered
Common items with models CHS-F and CHT-F
(1) Filter:
(2) Field diaphragm:
(3) Dimensions:
Cobalt filter (32.5C-2), mounted on a standard filter carrier and then
inserted in the condenser carrier.
45 mm dia filter can be used on the light exit window in the base.
Field diaphragm is available for mounting on the light exit window.
Auxiliary lens is located below the condenser carrier.
180 mm (W) x 223 mm (D) x 281 mm (H)”
* 389 mm (H) with binocular tube
(4) Maximum power consumption: 32VA 1OOV/l 1OV
32VA 2OOVf24OV
-3-
CHSF
(1) Light source:
(2) Weight:
6V 20W Halogen lamp
In-base transformer
Light adjustment with resistor coil.
Fuse holder
Detachable main cord
6.2 kg
CHT-F
(1) Light source: 1OOV 30W Tungsten lamp
Light adjustment with resistor coil
Fuse holder
(2) Weight: Detachable main cord
5.8 kg
CHD-F
(1) Mirror: 50 mm dia mirror is available
Plug-in type mount
(2) Illuminator:
Mounting hole: 5 mm ,i.03 mm
Attachable substage illuminator (LSK) is available
Plung-in type mount
(3) Dimensions:
(4) Weight:
Mounting hole: 5 mm +to3 mm
180 mm (W) x 223 mm (D) x 262 mm (H)”
* 370 mm (H) with binocular tube
4.9 kg
CH2-CD (Two lens condenser for CH2)
(1) Mounting onto the microscope: Condenser is inserted into substage sleeve and clamped.
(2) Numerical aperture: NAI .25 (immersed)
(3) Iris diaphragm: Iris opening from 1.7 mm - 29 mm, variable
(4) Type of illumination: Bright field illumination.
Dark field illumination is available if an optional dark field stop is
used.
(5) Filter:
(6) Special accessories:
Phase contrast illumination is also available with optional ring slits.
Cobalt filter is available with a filter holder or auxiliary lens.
(Snap-in type)
1. Filter holder
2. Auxiliary lens
3. Ring slit
CH-2FH (Filter holder for CH2)
(1) Mounting onto the condenser: Filter holder is mounted on the condenser with snap-in type spring
design.
(2) Filter size: 32,5 mm dia cobalt filter
(3) Accessory: Dark field stop
-4-
CH-2FS (Field iris diaphragm for CH2)
(1) Mounting onto the base: Field iris diaphragm is mounted on the light exit of the base
with snap-in type groove and spring.
Auxiliary lens is mounted on the condenser with snap-in type
groove and spring.
(2) Centering of field iris diaphragm: With two centering knobs on the auxiliary lens.
(3) Objectives which the field iris diaphragm which can be focused:
10X - 40X (At 40X the field number can be reduced to 15.)
Iris opening: 1.7 mm dia - 32 mm dia.
(4) Available filter: Auxiliary filter accepts cobalt filter of 32.5 mm dia.
(5) Available accessory: Dark field stop is available to fit on the auxiliary lens.
CH2-DS (Dark field stop for CH2)
(1) Mounting onto the condenser: Drop into auxiliary lens CH2-AL or filter holder CH2-FH and
snap into condenser.
(2) Objectives which can be used for dark field illumination:
4X - 40X. (NA 0.65 max)
(3) Numerical aperture of condenser with CHZ-DS attached:
0.7510.95
CH2-RSlO (10X Ring slit for CH2)
CH2-RS40 (40X Ring slit for CH2)
(1) Mounting on the condenser:
(2) Centering of the ring slit:
(3) Objectives:
Snap-in type
Two centering knobs,
PCDA 10X
PCDA 40X
CH’L-PCD (Universal condenser for CH2)
(1) Mounting on the substage:
(2) Numerical aperture:
(3) Turret:
(4) Centering of ring slit:
(5) Objectives:
(6) Filter:
Insert into condenser sleeve and clamp with clamping knob.
NA1.25 (immersed, brightfield)
4 hole turret.
Bright field , . , With aperture iris diaphragm (iris dia: 1.7 mm
- 29 mm)
Dark field . . . . Dark field illumination for objectives of 10X
- 40x.
1OX ring slit
40X ring slit
Centering with two removable centering keys.
Long barrel objectives (DAch and EDAch)
Phase contrast objectives (PCDAch 1OX and PCDAch 40X)
Green filter and cobalt filter are provided. To be placed on the
light exit on the base.
-5-
2. DISASSEMBLING PROCEDURE
CONTENTS
1. Disassembly of bottom plate of base ......................................... 9
2. Disassembly of light exit unit ............................................... 9
3. Disassembly of condenser carrier, stage and focusing unit ........................ .lO
4. Disassembly of focusing knobs ............................................. .I4
5. Disassembly of rack and pinion ............................................ .I 7
-7-
1. Disassembly of bottom plate of base
l-l.
1-2.
l-3.
2. Disassembly of light exit unit
Place the microscope upside down
move 4 screws (AB4 x 12SA).
Remove screw (AB4 x 12SA) which
the ground wire.
Pull up the bottom plate and remove
the main frame.
and re-
clamps
it from
2-l. Remove 3 screws (CUK2.6 x 10SA) which are
clamping the light exit unit.
-9-
3. Disassembly of condenser carrier, stage and
focusing unit
.. 3-l. Remove the arm (C2-AS) from the base
(C2-BS) by removing 4 screws (AB6 x 16SA).
*Mark the installing position before removal.
3-2. Remove the left outer guide (AB468900) of
the condenser carrier (C2-CH) by removing
screw (CUKSK3 x 1OSA).
3-3. Remove the condenser carrier (AB468800).
-lO-
Remove condenser rack (AA870700) by un-
screwing 2 screws (CUK3 x 6SA).
3-5. Remove the sleeve (AB469000).
*Disassemble the sleeve only when it has a
problem such as poor centration of the con-
denser or it is damaged.
3-5-l. Remove condenser clamping screw (AA-
008000).
3-5-2. Loosen 3 screws (ANU3 x 6SA).
3-5-3. Remove sleeve (AB469000).
3-6. Remove substage knob assembly (A8431 700).
-ll-
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Olympus Microscope
Olympus
Olympus IX81-ZDC2 Manuel utilisateur
Olympus
Olympus VANOX Mode d'emploi
Olympus
Olympus BH-2 BHT Manuel utilisateur
Olympus
Olympus PM10SP Guide d'installation
Olympus
Olympus BX61WI Manuel utilisateur
Olympus
Olympus U-D5BDREMC-VA3 Mode d'emploi
Olympus
Olympus FV3000 Manuel utilisateur
Olympus
Olympus STM7 Manuel utilisateur
Olympus
Olympus CHBS Manuel utilisateur
Olympus
Olympus CX21 Manuel utilisateur
Olympus
Olympus IX71 Manuel utilisateur
Olympus
Olympus DP21-SAL Guide de l'utilisateur
Olympus
Olympus U-DA Manuel utilisateur
Olympus
Olympus BHTU-112 Manuel utilisateur
Olympus
Olympus BX61 Manuel utilisateur
Olympus
Olympus SZX16 Manuel utilisateur
Olympus
Olympus IX81 Manuel utilisateur
Olympus
Olympus IX70 Manuel utilisateur
Olympus
Olympus KHC Manuel utilisateur
Olympus
Olympus BX45 Manuel utilisateur
Manuels Microscope populaires d'autres marques
VWR
VWR VisiScope 384 Series Manuel utilisateur
Nikon
Nikon ECLIPSE E200 POL Manuel utilisateur
Leica
Leica DI C800 Manuel
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manuel utilisateur
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manuel utilisateur
Leica
Leica FL560 Manuel utilisateur