Olivetti EXPLOR@ 950 LED Manuel utilisateur

Web Cash

EXPLOR@ 950 LED

Code: Y116500-1

SERVICE MANUAL

PUBBLICATION ISSUED BY:

Olivetti S.p.A.

Gruppo Telecom Italia

Via Jervis, 77 - 10015 Ivrea (TO)

PREFACE

This manual, intended for Explor@950 LED system installation and servicing technicians, contains all the

information necessary for correct installation and maintenance of the product.

SUMMARY

This manual is divided into following chapters.

•Chapter 1 – Provides general information about the system and connection of peripherals.

•Chapter 2 – Describes the technical specifications of the product.

•Chapter 3 – Describes servicing disassembly and reassembly procedures

LIABILITY DISCLAIMER

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages

arising out of the use or inability to use the product or documentation, even if advised of the possibility of such

damages.

The information in this document is subject to change without prior notice in order to improve reliability, design

and function and does not represent a commitment on the part of the manufacturer.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this

manual may be reproduced by any mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

All trademarks are property of their respective owners.

PREREQUISITES

The approach to the topics covered in this manual requires knowledge of similar products.

REFERENCES

Spare Parts Catalogue Explor@ 950 LED - code Y116510-2

Product Support Plan Explor@ 950 LED - code 808165-00

Product Logistic Support Explor@ 950 LED – code 808176-00

DISTRIBUTION: General

FIRST EDITION:July 2014

Y116500-1 Service Manual III

Page Intentionally blank

CONTENTS

CHAPTER 1 - HARDWARE SETUP..................................................................................................................1-1

PACKING CONTENTS ......................................................................................................................................1-1

QUICK TOUR .....................................................................................................................................................1-2

Front View and Rear View................................................................................... 1-2

LED Indicator....................................................................................................... 1-2

Back Panel I/O..................................................................................................... 1-3

BASIC PERIPHERALS INSTALLATION ..........................................................................................................1-3

CUSTOMER DISPLAY.......................................................................................................................................1-6

A. Hardware Installation ...................................................................................... 1-6

B. Customer Display Power Supply Configuration............................................. 1-7

MSR............................................................................................................................ 1-8

2ND DISPLAY................................................................................................................................................... 1-10

Base Type 2nd Display Kit Installation ............................................................... 1-11

Pole Type 2nd Display Kit Installation ................................................................ 1-15

2nd Display Power Supply Configuration ........................................................... 1-18

TURN ON THE DEVICE.................................................................................................................................. 1-19

CONNECTIONS .............................................................................................................................................. 1-20

Mother board connections................................................................................. 1-20

I/O DEFINITION............................................................................................................................................... 1-21

Power Connector............................................................................................... 1-21

Serial Port (COM 1, 2 and 5)............................................................................. 1-21

Cash Drawer...................................................................................................... 1-22

Connector .......................................................................................................... 1-22

Cash Drawer Control......................................................................................... 1-22

BIOS CONFIGURATION................................................................................................................................. 1-23

Serial Port Configuration ................................................................................... 1-23

Video Function Configuration ............................................................................ 1-26

CHAPTER 2 - SPECIFICATION ........................................................................................................................2-1

EXPLOR@950 LED- TROUBLESHOOTING ....................................................................................................2-3

System errors ...................................................................................................... 2-3

Peripheral errors.................................................................................................. 2-4

CHAPTER 3 - DISASSEMBLING PARTS.........................................................................................................3-1

SEPARATE THE BASE AND OPEN THE DEVICE ..........................................................................................3-1

MAINBOARD SIDE COMPONENTS REPLACEMENT ....................................................................................3-2

SMONTAGGIO DEL GRUPPO VIDEO.............................................................................................................3-8

HDD REMOVING ............................................................................................................................................ 3-10

Y116500-1 Service Manual v

Page Intentionally blank

Chapter 1 - HARDWARE SETUP

PACKING CONTENTS

1. EXPLOR@950 LED X 1

5. Recovery DVD X 1

2. Power Adapter X 1

6. Cable Cover X 1

3. Power Cord X 1

7. Safety and Disposal Information X 1

4. Drive and Utility DVD X 1

Y116500-1 Service Manual 1-1

QUICK TOUR

Front View and Rear View

LED Indicator

The Power indicator will glow green when power is on.

The HDD indicator will blink green when the HDD is accessed.

The LAN indicator will blink green when transferring data though the LAN.

1-2 Service Manual Y116500-1

Back Panel I/O

BASIC PERIPHERALS INSTALLATION

1. All cables and wires from peripherals to the POS device are recommended to be fed through the base in the

direction as shown below.

WARNING: Before the cable cover is removed, please make sure the power is off! Disconnect the Power Cord

from the socket.

Y116500-1 Service Manual 1-3

1. Power Adapter

Connect the DC cable to the DC in jack.

2. Computer Mouse and Computer Keyboard

Connect your computer mouse and keyboard to USB 1/2, UBS 3/4 or the KB/MSport, depends on which type

of computer mouse/keyboard used.

3. USB ODD

Connect your USB ODD to USB 1/2 or UBS 3/4 port.

1-4 Service Manual Y116500-1

Table des matières

Autres manuels Olivetti Terminal tactile

Olivetti

Olivetti Explor@ 100 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur