Oki C712 Guide de l'utilisateur

Version 1.0

Thank you for choosing OKI.

This is C712 configuration instructions for Ballot model. These instructions explain 2 ways for

configuration. Manually and using Ballot Configuration Tool.

Before ballot configuration, please perform the following steps.

1. Install Extended 2nd Paper Tray for 19" Ballots (Order/Part Number 44274505).

2. Turn ON the device.

3. Print the Configuration pages. (Print Information -> Configuration -> Execute)

4. Check Serial Number and the current tray 2 setting from the configuration pages.

[Serial Number]

[Tray 2 Setting (Paper Size)] (Before Ballot Configuration)

Notes: Be sure to note down the serial number as it is necessary for inquiry.

If you do not have Ballot Configuration Tool you can set by using device menu, please

proceed to next page. In case you have Ballot Configuration Tool, please proceed to page 3.

Version 1.0

1. Installation Steps: Using Device panel menu (Manually)

Menus -> Tray Configuration -> Tray 2 Config

-> ->

1. Set Paper Size from “Cassette Size”

to “Custom”.

2. Return to “Tray 2 Config” Menu.

3. Set X Dimension to “8.5 inch”.

4. Set Y Dimension to “19.0 inch”.

5. Complete

Version 1.0

2. Installation Steps: Using Ballot Configuration Tool

①Connect the PC and the device with a USB cable.

②Copy the module of the Data Transmitter which provided by OKI to your desktop.

1. Run the Data Transmitter Tool “DT.exe”.

2. Select your language and click “OK”.

3. Select “Open” from the file menu.

4. Select “setup.dtd” file.

(To be Continued)

Version 1.0

5. Select “C712-b Configuration” function.

6. Search a USB connected printer. If the

device was found, select it, and click

“Send”.

7. Click “OK”.

Please wait for about 10 seconds.

After the applying configuration, the

device will restart (Turn OFF and ON)

automatically.

8. The configuration is completed. The

device will auto reboot (Turn OFF and

ON).

(To be Continued)

Version 1.0

9. After reboot, the device does initialize.

After initializing, the device status

changes to ready.

10. Click “OK” and close this tool.

11. Print the Configuration pages.

MENU -> Print Information ->

Configuration -> Execute

12. Check the current tray 2 setting from

the configuration pages.

Paper Size is “Custom”.

X Dimension is “8.5 inch”.

Y Dimension is “19.0 inch”.

13. Complete

Version 1.0

3. Confirmation of setup

You can check the setup result from the 1st page of Configuration pages.

How to print the Configuration pages. (Print Information -> Configuration -> Execute)

Where and what should you look up?

Setup was successful if the following were applied to the Tray 2 settings:

•Paper Size is “Custom”.

•X Dimension is “8.5 inch”.

•Y Dimension is “19.0 inch”.

If the above settings are not applied, please repeat above procedure.

End of File

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Oki Imprimante

Oki

Oki PAGE 20DX Manuel utilisateur

Oki

Oki PACEMARK 3410 Manuel utilisateur

Oki

Oki C7350hdn Manuel utilisateur

Oki

Oki MICROLINE MX Series Manuel utilisateur

Oki

Oki C822n Manuel utilisateur

Oki

Oki OL1200 Manuel utilisateur

Oki

Oki C5800Ldn Series Manuel utilisateur

Oki

Oki C9800 Series Manuel utilisateur

Oki

Oki PAGE 16n Manuel

Oki

Oki OL600ex Manuel utilisateur

Oki

Oki C5500 Manuel utilisateur

Oki

Oki MPS6150c Manuel utilisateur

Oki

Oki C711WT Guide de démarrage rapide

Oki

Oki B4100 Manuel utilisateur

Oki

Oki C3000 Series Manuel utilisateur

Oki

Oki C130n Manuel utilisateur

Oki

Oki ML420 Series Manuel utilisateur

Oki

Oki ML8810 Manuel de service

Oki

Oki OKIPAGE 4W PLUS Manuel utilisateur

Oki

Oki OkiLAN 6120e Manuel utilisateur

Oki

Oki ML1120 Manuel d'utilisation et d'entretien

Oki

Oki ML6300 Manuel utilisateur

Oki

Oki Microline 520 Comment utiliser

Oki

Oki B4200 Mise à jour du firmware

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur