Oki OkiLAN 510w Manuel utilisateur
2
Every effort has been made to ensure that the information in this
document is complete, accurate, and up-to-date. The
manufacturer assumes no responsibility for the results of errors
beyond its control. The manufacturer also cannot guarantee that
changes in software and equipment made by other manufacturers
and referred to in this manual will not affect the applicability of the
information in it. Mention of software products manufactured by
other companies does not necessarily constitute endorsement by
the manufacturer.
While all reasonable efforts have been made to make this
document as accurate and helpful as possible, we make no
warranty of any kind, expressed or implied, as to the accuracy or
completeness of the information contained herein.
For the latest information, go to http://my.okidata.com.
Copyright © 2005 by Oki Data Americas, Inc. All rights reserved.
As an ENERGY STAR®Program Participant, the
manufacturer has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.
Oki Data and OkiLAN are registered trademarks of Oki Electric Industry Company Ltd.
ENERGY STAR is a registered trademark of the United States Environmental
Protection Agency.
Ethernet is a registered trademark of Xerox Corp.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Netscape is a registered trademark of of Netscape Communications Corporation in the
United States and other countries.
Other product names and brand names are registered trademarks or trademarks of their
proprietors.
OkiLAN 510w Configuration Guide, P/N 59368001 Rev 1.0
3
C
ONTENTS
Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Self-Diagnostic Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Resetting to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . 6
Network Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SSID (Service Set Identifier). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Security Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Summary of Configuration Modes. . . . . . . . . . . . . . . . 10
Ad Hoc Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Infrastructure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Telnet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control Panel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration: Ad Hoc Mode . . . . . . . . . . . . . . . . . . . . 12
IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Configuration: Infrastructure Mode . . . . . . . . . . . . . . 18
IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuration: Telnet . . . . . . . . . . . . . . . . . . . . . . . . . 38
Configuration: Printer Control Panel. . . . . . . . . . . . . . 41
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4 Basic Information
B
ASIC
I
NFORMATION
SELF-DIAGNOSTIC TEST _______________
To print the self-diagnostic test for the wireless network card:
1. Make sure
Ready to Print
appears on the display.
2. Press the TEST button (1) on the wireless network card for at
least 3 seconds.
The Network Summary report prints.
5 Basic Information
SPECIFICATIONS_____________________
RESETTING TO FACTORY DEFAULTS ________
To reset the wireless card to the factory default settings:
1. Turn off the printer.
2. Press and hold the TEST button on the wireless card while
turning the printer back on. Keep pressing the button until
Wait a Moment
Network Initializing
appears on the display.
3. Wait for
Ready to Print
to appear.
IEEE •802.11b
•802.11g
SECURITY: Authentication Encryption
WEP Shared Key WEP 64 or 128 bits
WPA-Home WPA-PSK TKIP
WPA-Enterprise EAP-TLS TKIP
PROTOCOL TCP/IP
COEXISTENCE WITH WIRED
PRINT SERVER • Both can work simultaneously as
independent interfaces
• Each has separate configuration (including
IP Address) and separate certificates.
• Packet routing is not performed between
the two.
6 Configuration Overview
C
ONFIGURATION
O
VERVIEW
NETWORK MODES ___________________
Ad-Hoc
Infrastructure
7 Configuration Overview
SSID (SERVICE SET IDENTIFIER)_________
In a wireless network, terminals can be assigned an SSID identifier
which restricts their access to printers on the network to only those
set up for that SSID.
For example, computers set up as Accounting can only
communicate to a printer through the Marketing access point (AP)
and computers set up as Marketing can only communicate to a
printer through the Marketing access point:
CHANNELS_________________________
There are 13 channels available for use in a wireless network.
However, adjacent channels share a frequency and can interfere
with one another.
Therefore, to obtain maximum communication speed and
accuracy, channels for access points which are near each other
should be selected with 5 channels space between them: e.g.,
channels 1, 6 and 11.
SSID = Marketing
SSID = Accounting SSID = Marketing
SSID = Accounting
8 Configuration Overview
SECURITY FEATURES__________________
Open (no security)
This can be used, but is not recommended.
WEP
Wired Equivalent Privacy, assuring wireless network security
equivalent to a wired network.
Set the same WEP key (64 or 128 bits) for all printers, computers
and access points on the wireless network.
WPA
WiFi Protected Access security, using TKIP encryption. This
security uses a pre-shared key set for all printers, computers and
access points in the wireless network. The key is periodically
changed.
EAP (Using Certificates)
Extensible Authentication Protocol security. In wireless
communications using EAP, connection to the wireless network is
requested through an access point, which in turn transmits the
certificate assigned to the computer and printer to an
authentication server such as RADIUS.
• EAP-TLS is used for authentication.
• Client and/or CA certificates must be imported into the
printer.
• Certificates must be obtained separately by the network
administrator before setting the printer for EAP.
Client Certificates
• This is the printer’s own certificate.
• The client must have a private key which corresponds to a
public key contained in the certificate.
• Required file format for imported certificates = [PKCS#12].
• Suitable file extensions include *.p12 and *.pfx.
CA Certificates
• The printer is not involved in the CA certificate chain.
9 Configuration Overview
• EAP-TLS requires authentication of the Server Certificate
issued by a Certificate Authority and sent from a RADIUS
server.
• Certificate Authentication requires that the printer have a
certificate issued by the Certificate Authority that issued the
Server Certificate.
• Required file formats = [PEM] or [DER].
• Suitable CA Certificate extensions include *.pem, *.der and
*.cer.
10 Summary of Configuration Modes
S
UMMARY
OF
C
ONFIGURATION
M
ODES
ADHOC MODE _____________________
In this mode, wireless computers communicate with the printer
peer-to-peer, gaining access through an SSID you set.
Available security features for Ad Hoc Mode:
• Open (no security)
•WEPSharedKeySecurity
INFRASTRUCTURE MODE _______________
In Infrastructure Mode both wireless and wired computers
communicate to the printer through an access point such as a hub.
Available security features for this mode include
• Open (no security)
•WEPSharedKeySecurity
• WPA Pre-Shared Key Security
• EAP Certification Security
TELNET MODE ______________________
This mode sets up the printer using Telnet commands.
Available security features for this mode include
•Open(NoSecurity)
•WEPSharedKeySecurity
• WPA Pre-Shared Key Security
• EAP Certification Security
CONTROL PANEL MODE _______________
You can also configure the wireless card through the printer’s
control panel, but this mode is very limited.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Oki Imprimante tout-en-un
Oki
Oki MC363 Guide de configuration
Oki
Oki MC160N Manuel utilisateur
Oki
Oki C9800hdn Manuel de service
Oki
Oki CX 1145 MFP Manuel du propriétaire
Oki
Oki MB470 MFp Manuel utilisateur
Oki
Oki CX2731MFP Manuel utilisateur
Oki
Oki OKIOFFICE 87 Manuel de la liste des pièces
Oki
Oki MC300 Manuel utilisateur
Oki
Oki MC561MFP Guide de l'utilisateur
Oki
Oki ES845MFP Manuel utilisateur
Oki
Oki MC760 Manuel utilisateur
Oki
Oki MPS480mb Guide de démarrage rapide
Oki
Oki C5550n MFP Guide de démarrage rapide
Oki
Oki ES3640 MFP Manuel utilisateur
Oki
Oki C3530n MFP Manuel utilisateur
Oki
Oki C5510n MFP Manuel utilisateur
Oki
Oki ES3640eMFP Guide de configuration
Oki
Oki ES9160 MFP/ES9170 MFPES9460 MFP Manuel utilisateur
Oki
Oki MB780 Manuel utilisateur
Oki
Oki B2520 Manuel utilisateur
Manuels Imprimante tout-en-un populaires d'autres marques
Triumph Adler
Triumph Adler DC 2016 Manuel
Epson
Epson WorkForce WF-2510 Guide de l'utilisateur
Epson
Epson Stylus Scan 2000 Manuel d'installation et d'exploitation
Epson
Epson PictureMate Snap PM 240 Mode d’emploi
Konica Minolta
Konica Minolta bizhub C35 Manuel utilisateur
Brother
Brother MFC-J430w Manuel utilisateur
