Ojeda Alpa 120 Slim Manuel utilisateur
DOOR INSTALLATION
ALPA-120 SLIM
ALPA 120 Slim Doors
460 Southport Commerce Blvd.
Spartanburg SC 29306
Phone: 864-574-6004
Fax: 864-574-6005
PARTS INCLUDED IN THE KIT
TOOLS NEEDED FOR INSTALLATION
1. TWO DOOR
ASSEMBLIES
4. FOUR #8
DRILL SCREWS
5. EIGHT #10
DRILL SCREW
2. TWO HANDLES
6. TWO PINS
A. ELECTRIC SCREWDRIVER
C. 5/16” SOCKET WRENCH D. CROSS SCREWDRIVER
B. PHILLIPS TIP
3. FOUR SHEET METAL HINGES
AND TWO DOOR STOPS
STEP 1:
Remove the front acrylic and its plastic moldings
STEP 2:
Place and screw the 4 sheet metal hinges on the posts using #10 x 3/4 screws
STEP 3:
Remove the lower steel hinge by loosening the screws that hold it
STEP 4:
Place the bushing and the lower steel hinge on the lower sheetmetal hinge
STEP 5:
Put the bushing at the upper steel hinge and insert into the sheetmetal hinge.
Assemble with the lower steel hinge and tighten the steel hinge screws to
secure the door.
STEP 6:
Repeat the above steps to install the opposite door
STEP 7:
Take the handle and assemble it by screwing it with the door.
Repeat this step for the opposite door
STEP 8:
Place the door stops using the drill screws at the middle of the
upper and lower front
STEP 9:
Adjust the doors by loosening and tightening the
steel hinge screws and the magnetic stop screws
YOUTUBE
To see a video of how to install the doors, please check out our
youtube video with this QR Code.
https://youtu.be/WuPqVXEgRCU
QUESTIONS?
https://ojedausa.com
460 Southport Commerce Blvd.
Spartanburg SC 29306
Phone: 864-574-6004
Fax: 864-574-6005
Table des matières
Autres manuels Ojeda marchandiseur
Manuels marchandiseur populaires d'autres marques
True
True GDIM-26 Manuel utilisateur
Structural Concepts
Structural Concepts Oasis Mobile Series Instructions d'installation
Hussmann
Hussmann Q2-SS Instructions d'utilisation d'origine
Haussmann
Haussmann RL Manuel utilisateur
Howard McCray
Howard McCray R-CDS32E-4 Manuel utilisateur
Hussmann
Hussmann microSC SHM-A Series Manuel utilisateur
