OHAUS MB90/MB120 Manuel utilisateur

Quick Start Guide MB90/MB120

Ohaus Corporation www.ohaus.com i MB90/120 Moisture Analyzers Quick Start Guide

ASSEMBLY

CONTROLS

Turns On or Off display and fan.

When pressed, sends Print command.

When pressed, either starts or stops the

drying process.

When pressed, performs Tare function.

Leveling indicator

Leveling

Feet

Used to level the Moisture Analyzer.

MAKING A SIMPLE MEASUREMENT

Use one of the included absorbent glass fiber pads as a sample to become familiar with the instrument and the

various displays.

If the display is not visible and the unit is plugged into a power source, press

the On/Off button.

Directly start a measurement.

Open the cover on the Moisture Analyzer.

Clean the pan.

Place the pan handle in the sample chamber. Ensure that the tongue of the

pan handle fits exactly in the slot of the draft shield element.

Place the empty sample pan and glass fiber pan in the pan handle. The

sample pan must lie flat in the pan handle.

Note: It is advisable for you to work with the pan handle at all times. The pan

handle is ergonomic, safe and provides protection against possible burns due

to a hot sample pan.

Close the cover. This sets the Moisture Analyzer to zero automatically.

Open the cover on the Moisture Analyzer.

Wet the glass fiber pan with a 0.5 to 1 gram of water.

Note: Minimum sample size must be greater than 0.5 gram.

Starting the test

Close the cover, the Moisture Analyzer starts the drying and measurement

process automatically.

Tray Pan

Leveling

Feet

Leveling

Indicator

Draft Shield

Pan Support

Pan Handle

Sample Pan

MB90/MB120 Quick Start Guide

MB90/120 Moisture Analyzers Quick Start Guide ii Ohaus Corporation www.ohaus.com

Drying and measurement

You are now able to follow the progress of the drying cycle on the display.

This first display comes up automatically when the test was started.

Observing the test progress

There are two displays available when the Moisture Analyzer is running a test.

One showing the %MC value and another showing a curve.

When pressing the data area while %MC is shown, the display will switch to

show the curve. Likewise, pressing the data area again will switch back to

show the %MC value.

The display indicates the Method Name, Temperature/Time, actual

temperature, elapsed time duration of the test, moisture and curve.

The test automatically stops at the end of the measurement.

If you want to end the test sooner, press the button.

Congratulations! You have just performed your first measurement with your

moisture analyzer.

Carefully remove the sample pan handle from the drying area.

WARNING: As the pan and sample may still be hot, you should let these

cool down before removing the pan from the pan handle!

Edit default method

The analyzer comes with a default method preinstalled. The settings of the

default method are shown on the display. To edit the settings, press on the

area where the settings are displayed as shown to the left.

Press the setting items to edit them.

Please see the instruction manual for more details.

*30241177*

P/N 30241177D

MB120 Instruction Manual:

MB90 Instruction Manual:

For the full instruction manual, please scan the QR code or click

the link below:

http://dmx.ohaus.com/WorkArea/

showcontent.aspx?id=

4294974363

http://dmx.ohaus.com/Work

Area/showcontent.aspx?id=

4294974528

Table des matières

Autres manuels OHAUS Échelle

OHAUS

OHAUS DCR250 Manuel utilisateur

OHAUS

OHAUS CS 2000 Manuel utilisateur

OHAUS

OHAUS RC31P1502 Manuel utilisateur

OHAUS

OHAUS HH 120D Manuel utilisateur

OHAUS

OHAUS ES30R Manuel utilisateur

OHAUS

OHAUS Reloading Scale 5-0-5 Manuel utilisateur

OHAUS

OHAUS Ranger Count 3000 Series Manuel utilisateur

OHAUS

OHAUS Catapult 1000 Manuel utilisateur

OHAUS

OHAUS Pioneer Manuel utilisateur

OHAUS

OHAUS GT 210 Manuel

OHAUS

OHAUS CHAMP II BASE Manuel utilisateur

OHAUS

OHAUS Compact Series Manuel utilisateur

OHAUS

OHAUS DEFENDER SERIES Manuel utilisateur

OHAUS

OHAUS Scout SPX123 Manuel utilisateur

OHAUS

OHAUS Scout pro Manuel utilisateur

OHAUS

OHAUS CKW3R Manuel utilisateur

OHAUS

OHAUS Scout SJX Manuel utilisateur

OHAUS

OHAUS EC Series Manuel utilisateur

OHAUS

OHAUS SP202 Manuel utilisateur

OHAUS

OHAUS Traveler Series Manuel utilisateur

OHAUS

OHAUS Ranger Count 3000 Series Manuel utilisateur

OHAUS

OHAUS VF Series Manuel utilisateur

OHAUS

OHAUS VE Series Manuel utilisateur

OHAUS

OHAUS SCOUT II Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur