2
Operating Instructions and Parts Manual 23974
11/17
2017 OEMTOOLS™
14,700 CFM VARIABLE SPEED
EVAPORATIVE COOLER
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn
the product’s applications and limitations, as well as
potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle tools or equipment
without strict adult supervision.
4. DO NOT operate this product if under the influence of
alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, DO NOT attempt to
operate.
5. Use safety equipment. Eye protection should be worn at all
times when operating this tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties,
rings, bracelets or other jewelry may present a potential
hazard when operating this product. Keep all apparel clear
of the product.
7. DO NOT overreach. Keep proper footing and balance at all
times when operating this product.
8. Check for damage. Check equipment regularly. If part of
the product is damaged, it should be carefully inspected
to make sure that it can perform its intended function
correctly. If in doubt, discontinue use of product.
9. Keep away from flammables. DO NOT attempt to operate
this product near flammable materials or combustibles.
Failure to comply may cause serious injury or death.
10. Store this product out of the reach of children and untrained
persons. This product may be dangerous in the hands of
untrained users.
11. Keep this product dry and clean.
12. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when used
on another product.
13. Service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
14. When servicing a product, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
15. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions, grease,
oil, trash, and other debris. Do not use this product in a
damp or wet location.
16. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS™for a replacement.
17.Keep this product dry, clean, and free from brake fluid,
oil, and grease.
18. Avoid accidental fire. DO NOT smoke near this product.
19.The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions and
situations that may occur. The operator must understand
that common sense and caution are factors which
cannot be built into this product, but must be supplied by
the operator.
20.We believe the information contained herein to be
reliable. However, general technical information is
given by us without charge and the user shall employ
such information at their own discretion and risk.
We assume no responsibility for results or damages
incurred from the use of such information in whole or
in part.
21. The manufacturer declines any and all responsibility for
property damage or injury if said damage is the result of
unskillful handling by the operator or of failure to observe
the basic safety rules set forth in the instruction manual.
22. The procedures documented in this manual are to serve as
guidelines for the use of this equipment.
23.The use of this equipment is simple and
straightforward if you follow the instructions. When
operating this equipment, use common sense, and
only use this equipment for its intended purpose.
PRODUCT DESCRIPTION
The OEMTOOLS™23974 14,700 CFM Variable Speed
Evaporative Cooler is designed to efficiently cool
workspaces. This Evaporative Cooler pulls hot surrounding
air through wet cooling pads, where the air is cooled
through the process of evaporation. The powerful 0.5 HP
fan then pushes the cooled air at 14,700 CFM into the
surrounding area—cooling spaces up to 3,700 ft².
