Oce cm5520 Manuel utilisateur
Océ
cm5520
Enlarge Display
Operations
User’s Guide
Printing for
Professionals
Introduction
cm5520 x-1
Introduction
Thank you for choosing this machine.
The cm5520 User’s Guide [Enlarge Display Operations]
contains details on the operation of the various
functions available in the Enlarge Display mode of the
cm5520 and on the various operating precautions. In
order to ensure that this machine is used correctly and
efficiently, carefully read the Enlarge Display Mode
Operations volume of the User’s Guide before using
the machine.
After reading the Enlarge Display Mode Operations
volume of the User’s Guide, store it in the designated
holder so that it can easily be referred to when
questions or problems arise during operation.
Views of the actual equipment may be slightly different
from the illustrations used in this Enlarge Display Mode
Operations volume of the User’s Guide.
Introduction
x-2 cm5520
Explanation of manual conventions
7 CAUTION
CAUTION
%Failure to observe instructions highlighted in this
manner may result in serious injuries or property
damage.
Observe all cautions in order to ensure safe use of
this machine.
2
Reminder
Text highlighted in this manner indicates operation
precautions. Carefully read and observe this type of
information.
!Detail
Text highlighted in this manner provides more detailed
information concerning operating procedures and other
descriptions.
2
Note
Text highlighted in this manner indicates sections
containing additional information. If necessary, refer to
the indicated sections.
Introduction
cm5520 x-3
[ ]
Names highlighted as shown above indicate keys on
the control panel and buttons in the touch panel.
Introduction
x-4 cm5520
Contents
1 Before use
1.1 Names of control panel parts and their
functions .................................................. 1-2
1.2 Adjusting the angle of the control
panel ............................................................ 1-6
To adjust the angle of the control
panel ...........................................................1-7
1.3 Screens in Enlarge Display mode .......... 1-9
Displaying screens in Enlarge Display
mode ............................................................... 1-9
1.4 Touch panel ........................................... 1-11
Touch panel operation ......................... 1-11
Icons that appear in the screen ............ 1-11
Paper type icons .................................. 1-12
Paper supply icons ............................... 1-14
1.5 Feeding the document .......................... 1-15
Loading the document into the ADF .... 1-15
Placing the document on the original
glass ............................................................. 1-17
1.6 Specifying document settings ............. 1-19
Copying documents of mixed sizes
(“Mixed Original” setting) ..................... 1-20
Loading folded documents
(“Z-Folded Original” setting) ................. 1-24
Introduction
cm5520 x-5
Selecting the document orientation
(Original Direction settings) ...................1-26
Selecting the position of the binding
margin (Original Binding Position/
Binding Position settings) .......................... 1-29
2 Using copy functions
2.1 General copy operation ...........................2-2
2.2 Selecting a Color setting .........................2-5
2.3 Selecting the Paper settings ...................2-8
Automatically selecting the paper size
(“Auto” Paper setting) .............................2-8
Manually selecting the desired paper
size ...............................................................2-10
2.4 Specifying a Zoom setting ....................2-12
Selecting a zoom ratio ..........................2-13
2.5 Selecting document and copy settings .... 2-15
Selecting single-sided or double-sided
copies ...................................................2-16
2.6 Selecting a combined copy setting ......2-19
2.7 Selecting Finishing settings ..................2-21
Selecting the finishing method .............2-23
Selecting Staple/Punch settings ...........2-24
Selecting a folding or binding setting ...2-26
2.8 Selecting not to rotate the image .........2-29
Introduction
x-6 cm5520
2.9 Selecting the quality of the
document ............................................... 2-30
2.10Selecting the density settings .............. 2-34
Adjusting the print density
(Density settings) .................................. 2-34
Adjusting the background density
(Background Removal settings) ........... 2-36
2.11Selecting the Paper settings ................ 2-38
Selecting a Paper Type setting ............ 2-38
Printing double-sided copies
manually ............................................... 2-41
Selecting a Paper Size setting ............. 2-44
2.12 Scanning the next document to be
copied while a copy job is being
printed (next job reservation) .................. 2-49
2.13Pausing scanning/printing ................... 2-51
2.14Printing a proof to check the settings
(Proof Copy) ........................................... 2-53
3 Using fax/scanning functions
3.1 General fax/scan operation .................... 3-2
3.2 Specifying a destination ......................... 3-5
Selecting a destination from the address
book ....................................................... 3-7
Selecting a destination from the job
log ...............................................................3-10
Selecting a destination with an
LDAP search ........................................ 3-11
Introduction
cm5520 x-7
Directly typing in the fax number ..........3-15
3.3 Specifying scanning settings
(Scan Settings) .......................................3-18
Simplex/Duplex .....................................3-18
Original Type .........................................3-20
Resolution .............................................3-24
Density ..................................................3-26
File Type ................................................3-28
Color (Image Adjust) .............................3-30
Background Removal (Image Adjust) ...3-33
Scan Size ..............................................3-36
Original Settings ....................................3-38
3.4 Using a program ....................................3-42
3.5 Checking the destinations ....................3-44
4 Logging on and logging off
4.1 When a logon screen appears ................4-2
When the screen to enter the user name
appears ...................................................4-2
When the screen to enter the account
name and password appears .................4-7
Introduction
x-8 cm5520
Before use Chapter 1
1Before use
Autres manuels pour cm5520
7
Table des matières
Autres manuels Oce Imprimante tout-en-un
Oce
Oce VarioPrint 1055 Manuel utilisateur
Oce
Oce TCS400 Manuel utilisateur
Oce
Oce cm4010 Manuel utilisateur
Oce
Oce TDS400 Manuel utilisateur
Oce
Oce CS250 Manuel utilisateur
Oce
Oce fx2081 Manuel utilisateur
Oce
Oce VarioLink 4522c Manuel utilisateur
Oce
Oce OP20 Manuel utilisateur
Oce
Oce cm5520 Manuel utilisateur
Oce
Oce VarioPrint 2062 NC Manuel utilisateur
Oce
Oce CS655 Pro Manuel d'utilisation et d'entretien
Oce
Oce VarioPrint 2070 Manuel utilisateur
Oce
Oce VarioLink 2222c Manuel utilisateur
Oce
Oce VarioStream 7000 SINGLE Manuel utilisateur
Oce
Oce VarioLink 5022 Manuel utilisateur
Oce
Oce OP1030 Manuel utilisateur
Oce
Oce TDS400 Manuel de service
Oce
Oce VL3200x Manuel utilisateur
Oce
Oce VarioLink 2222c Manuel utilisateur
Oce
Oce 9400-II Manuel utilisateur
Manuels Imprimante tout-en-un populaires d'autres marques
Triumph Adler
Triumph Adler DC 2016 Manuel
Epson
Epson WorkForce WF-2510 Guide de l'utilisateur
Epson
Epson Stylus Scan 2000 Manuel d'installation et d'exploitation
Epson
Epson PictureMate Snap PM 240 Mode d’emploi
Konica Minolta
Konica Minolta bizhub C35 Manuel utilisateur
Brother
Brother MFC-J430w Manuel utilisateur
