NXP Semiconductors M68EM05F4 Manuel utilisateur

M68EM05F4/D

Rev. 1

March 1995

M68EM05F4

EMULATOR MODULE

USER'S MANUAL

Second Edition

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Motorola reserves the right to make changes without further notice to any products herein to

improve reliability, function, or design. Motorola does not assume any liability arising out of

the application or use of any product or circuit described herein; neither does it convey any

license under its patent rights nor the rights of others. Motorola products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into

the body, or other application in which the failure of the Motorola product could create a

situation where personal injury or death may occur. Should Buyer purchase or use Motorola

products for any such unintended or unauthorized application, Buyer shall indemnify and

hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless

against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such unintended

or unauthorized use, even if such claim alleges that Motorola was negligent regarding the

design or manufacture of the part.

Motorola and the Motorola logo are registered trademarks of Motorola Inc.

Motorola Inc. is an Equal Opportunity/Affirmative Action Employer.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

CONTENTS

CHAPTER 1 INTRODUCTION ................................ ................ 1 - 1

1 . 1 Development Sy st em s ................................ .......................... 1 - 1

1 . 1 . 1 Motor o la Mod u lar Development S ys te m ( M M D S 0 5 ) .................... 1 - 1

1 . 1 . 2 M68 H C05E VS Evaluat i on Sy st em ( H C 0 5 E V S ) .......................... 1 - 2

1 . 2 E M La y ou t ................................ ................................ ....... 1 - 3

1 . 3 Con nec t ors P 2 a n d P 3 P i n Assi g nmen ts ................................ ...... 1 - 4

CHAPTER 2 MMDS05 CONFIGURATION AND OPERATION ........ 2 - 1

2 . 1 Set tin g F4 EM J um pe r H e a d e r s ................................ ................. 2 - 2

2 . 1 . 1 Cl oc k So ur ce S e lec t H ea de rs ( J 1 a n d J 2 ) ................................ 2 - 2

2 . 1 . 2 Cl oc k Str etc h S ele c t He ade r ( J 3 ) . ................................ ........ 2 - 3

2 . 1 . 3 Re se t Sel e ct He ad er ( J 4 ) ................................ .................. 2 - 3

2 . 2 T h e Emulated M C U ................................ ............................. 2 - 4

2 . 2 . 1 MC 6 8H C70 5F4 Em u lation Limitations ................................ .. 2 - 4

2 . 2 . 2 MC 68H C05 F4 Emul a tion Limitations ................................ ... 2 - 4

2 . 3 Remai n ing Sy st em I n stallation ................................ ................ 2 - 5

CHAPTER 3 HC05EVS CONFIGURATION AND OPERATION ....... 3 - 1

3 . 1 Set tin g F4 EM J um pe r H e a d e r s ................................ ................. 3 - 2

3 . 1 . 1 Cl oc k So ur ce S e lec t H ea de rs ( J 1 a n d J 2 ) . . .............................. 3 - 2

3 . 1 . 2 Cl oc k Str etc h S ele c t He ade r ( J 3 ) . ................................ ........ 3 - 2

3 . 1 . 3 Re se t Sel e ct He ad er ( J 4 ) ................................ .................. 3 - 3

3 . 2 T h e Emulated M C U ................................ ............................. 3 - 3

3 . 2 . 2 MC 6 8H C70 5F4 Em u lation L i m i t a t i o n s ................................ ... 3 - 3

3 . 2 . 3 MC 68H C05 F4 Emul a tion Limitations ................................ ... 3 - 3

3 . 3 E V S L i m i t a t i o n s ................................ ................................ .3 - 4

3 . 4 Lo gic An a lyzer Co n nec t or P 1 ................................ .................. 3 - 5

3 . 5 Remai n ing Sy st em I n s t a l l a t i o n ................................ ................. 3 - 7

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

CONTENTS

FIGURES

Figure Page

1 - 1 H C 0 5 F 4 Emula t or Mod u le ................................ ................... 1 - 3

1 - 2 Con nec t ors P 2 a n d P 3 P i n A ssign ment s ................................ .... 1 - 4

3 - 1 Con nect or P 1 P i n A s sign ments ................................ .............. 3 - 5

TABLES

Table Page

2 - 1 M C U s a n d Per sonal ity F i l e s ................................ .................. 2 - 4

3 - 2 Lo gic An a lyzer Co n nec t or P 1 S ign al D e s c r i p t i o n s .......................... 3 - 6

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

CHAPTER 1

INTRODUCTION

This user's manual explains connection, configuration, and operation information specific to

the M68EM05F4 Emulator Module (F4EM). The F4EM makes possible emulation and

debugging of target systems based on these microcontroller units (MCUs):

MC68HC705F4 MC68HC05F4

The F4EM can be part of two development systems. This chapter describes those systems

and explains the layout of the F4EM.

The factory installs an MC68HC705F4 resident MCU in the F4EM.

1.1 DEVELOPMENT SYSTEMS

Your F4EM can be part of two Motorola development tools: the HC05 Motorola Modular

Development System (MMDS05) or the M68HC05EVS Evaluation System (HC05EVS).

1.1.1 Motorola Modular Development System (MMDS05)

The MMDS05 is an emulator system that provides a bus state analyzer and real-time

memory windows. The unit's integrated design environment includes an editor, an assembler,

user interface, and source-level debug. A complete MMDS05 consists of:

•a station module — the metal MMDS05 enclosure, containing the control board and

the internal power supply. Most system cables connect to the MMDS05 station module.

(The cable to an optional target system, however, runs through an aperture in the station

module enclosure to connect directly to the emulator module.)

•an emulator module (EM) — such as the F4EM: a printed circuit board that enables

system functionality for a specific set of MCUs. The EM fits into the station module

through a sliding panel in the enclosure top. The EM has a connector for the target

cable.

•two logic clip cable assemblies — twisted-pair cables that connect the station

module to your target system, a test fixture, a clock, or any other circuitry useful for

evaluation or analysis. One end of each cable assembly has a moulded connector, which

fits into station-module pod A or pod B. Leads at the other end of each cable terminate

in female probe tips. Ball clips come with the cable assemblies.

•a 9-lead RS-232 serial cable — the cable that connects the station module to the

host computer RS-232 port.

•a 9- to 25-pin adapter — a moulded assembly that lets you connect the 9-lead cable

to a 25-pin serial port.

•system software — software, on 3-1/2 inch diskettes.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

•MMDS05 documentation — an MMDS05 operations manual (MMDS05OM/D) and

the appropriate EM user's manual.

As mentioned, your F4EM gives the MMDS05 the ability to emulate the MC68HC(7)05F4

MCU. By substituting a different EM, you can enable your MMDS05 to emulate an MCU

of a different series. (Your Motorola representative can explain all the EMs available.)

Chapter 2 explains how to configure and use your F4EM as part of an MMDS05 system.

For information about MMDS05 software or the station module, see the MMDS05

operations manual. For layout and configuration information pertaining to a different EM,

see the corresponding EM user's manual.

1.1.2 M68HC05EVS Evaluation System (HC05EVS)

An HC05EVS is an economical, two-board tool for designing, debugging, and evaluating target

systems based on an MC68HC05 MCU. A complete HC05EVS consists of:

•a platform board (PFB) — the bottom board, which supports the emulator module.

The platform board has connectors for power and for the terminal or host computer.

•an emulator module (EM) — such as the F4EM: a printed circuit board that enables

system functionality for a specific set of MCUs. The EM fits onto the PFB. The EM

has connectors for a target cable and for a cable to a logic analyzer.

•an RS-232 serial cable — the cable that connects the PFB to the host computer RS-

232 port.

•system software — software, on 3-1/2 inch diskettes.

•HC05EVS documentation — an HC05EVS operations manual (HC05EVSOM/D)

and the appropriate EM user's manual.

As mentioned, your HC05F4 EVS emulates the MC68HC705F4 and the MC68HC05F4

MCUs. By substituting a different EM, you can enable your HC05EVS to emulate an MCU

of a different series. (Your Motorola representative can explain all the EMs available.)

Chapter 3 explains how to configure and use your F4EM as part of an HC05EVS system.

For information about HC05EVS software or the platform board, see the HC05EVS

operations manual. For layout and configuration information pertaining to a different EM,

see the corresponding EM user's manual.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

1.2 EM LAYOUT

Figure 1-1 shows the layout of the F4EM. Use jumpers J1 and J2 to select the clock source

for the emulator. Jumper header J3 lets you select clock stretching if required. J4 controls the

path of a target reset.

Connector P1 is for a logic analyzer. (Connector P1 has more significance for an EVS system,

as an MMDS05 system includes a bus analyzer). Expansion header connectors P2 and P3

connect the EM and the control board (for an MMDS05) or the EM and the platform board

(for an EVS). Finally, Connectors P4 and P5 allow for connection of a target cable that is

available separately. If you install the F4EM board in the MMDS05, the target cable passes

through a slit in the MMDS05 enclosure.

P3P2

P5P4

M68EM05F4

Figure 1-1. HC05F4 Emulator Module

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

INTRODUCTION

1.3 CONNECTORS P4 AND P5 PIN ASSIGNMENTS

Figure 1-2 shows the pin assignments for connectors P4 and P5. For signal descriptions,

consult the technical data book for the specific MCU.

PC1

TNO

TCMP2

TCMP1

GND

PC4

PC6

EVDD

PB6

PD7

PD6

IRQ*

GND

PC0

GND

PA0

GND

PB5

GND

PB1

RESET*

GND

PD3

PD1

GND

PA6

PA4

GND

PC2

GND

PB3

PB2

PB0

GND

PD4

PD2

PD0

PA7

PA5

PA2

GND

TNX

TCAP2

TCAP1

PC3

PC5

PC7

PB7

PB4

GND

PD5

TOSC1

GND

PA3

PA1

GND

Figure 1-2. Target Connector

As connector P1 has more importance to an HC05EVS than to an MMDS05, pin

assignments for connector P1 are in Chapter 3.

To configure your F4EM for use as part of an MMDS05, follow the instructions of Chapter

2. To configure your F4EM for use as part of an HC05EVS, follow the instructions of

Chapter 3.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MMDS05 CONFIGURATION AND OPERATION

CHAPTER 2

MMDS05 CONFIGURATION AND OPERATION

This chapter explains how to configure and use your F4EM as part of an MMDS05. For

other parts of system installation or configuration, see the MMDS05 operations manual

(MMDS05OM/D). (If you intend to use your F4EM as part of an HC05EVS system, go to

Chapter 3 for corresponding information.)

Paragraph 2.1 explains how to set F4EM jumper headers. Paragraph 2.2 explains

considerations pertaining to the MCU you emulate. Paragraph 2.3 explains remaining system

installation.

Note that you can configure a F4EM already fitted in the MMDS05 station module

enclosure. To do so, switch off station-module power, remove the top panel, then follow the

guidance of this chapter.

CAUTION

Be sure to switch off power if you reconfigure an installed EM. Reconfiguring

EM jumper headers with power left on can damage MMDS05 circuits.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MMDS05 CONFIGURATION AND OPERATION

2.1 SETTING F4EM JUMPER HEADERS

Your F4EM has four jumper headers, J1 to J4. This section explains how to configure these

headers.

2.1.1 Clock Source Select Headers (J1, J2)

Jumper headers J1 and J2 determine the source of the clock signal. The diagram below shows

the factory configuration of these jumpers: the fabricated jumper between pins 2 and 3 selects

the F4EM canned oscillator clock source.

MMDS EM

TOSC1 (J1)

FABRICATED

JUMPERS

1(2) (3)

Alternatively, you may use a clock source originating from the MMDS05 control board. To

do so, reposition the J1 jumper between pins 1 and 2. Then use the MMDS OSC command

to select clock frequency.

Use Jumper J2 to select between an internal generated clock and an external clock generated

by the target system. If the jumper on J2 is between pins 1 and 2 (selecting external clock),

the position of J1 is not important.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Table des matières

Autres manuels NXP Semiconductors Unité de contrôle

NXP Semiconductors

NXP Semiconductors TWR-LS1021A Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-K64F120M Manuel utilisateur

NXP Semiconductors

NXP Semiconductors Freescale MC9S12C32 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors i.MX8 QM Mode d’emploi

NXP Semiconductors

NXP Semiconductors PN544 C2 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-SER2 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale TWR-56F8200 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale TWR-S08PT60 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-KL43Z Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-PROTO Manuel utilisateur

NXP Semiconductors

NXP Semiconductors HC05E24 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors QN9090 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors A3M34SL039 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TDA8920 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-56F8400 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM27642 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-RF-SNAP Manuel utilisateur

NXP Semiconductors

NXP Semiconductors freescale TWR-TWRPI-BD Manuel utilisateur

NXP Semiconductors

NXP Semiconductors PX series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC55S6 Series Instructions d'installation et d'utilisation

NXP Semiconductors

NXP Semiconductors A3M38SL039 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors A3M36SL039I Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-MCF5441X Manuel utilisateur

NXP Semiconductors

NXP Semiconductors LPC54018 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur