nvent SCHROFF 60118583 Manuel utilisateur
nVent.com/SCHROFF |1
1U Ultra short depth LCD Console Drawer
Ultra short depth
400mm / 15.7″
Options :
- SDI
- HDMI
- DC power
Item Number 60118-599
INSTALLATION AND MAINTENANCE GUIDE
User Manual
2 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Legal Information
First English printing, March 2019
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environ-
ment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and
current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher
than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, re or electrical shock.
• Only qualied service personnel should open the chassis. Opening it yourself could damage the equipment
and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualied service
personnel.
What the warranty does not cover
• Any product, on which the serial number has been defaced, modied or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized product
modication, or failure to follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power uctuation or failure.
• Use of supplies or parts not meeting our specications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.
INSTALLATION AND MAINTENANCE GUIDE
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Any changes or modications made to this equipment may void the user’s authority to operate
this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
4 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Contents
Legal Information ......................................................................................................................2
Safety Instructions ....................................................................................................................2
What the warranty does not cover.........................................................................................2
Regulatory Notices Federal Communications Commission (FCC).................................3
Before Installation .....................................................................................................................5
Unpacking ...................................................................................................................................5
How To Clean Your LCD Monitor............................................................................................5
Cleaning Your Monitor..............................................................................................................5
Cleaning Tough Marks and Smudges ...................................................................................5
Package Content .......................................................................................................................6
Structure Diagram .....................................................................................................................6
Dimension...................................................................................................................................7
Installation - Installation Slides...............................................................................................8
Installation - How to use the drawer......................................................................................9
Connection to USB Server via CX-6cable.............................................................................10
Connection to external KVM via CX-6cable....................................................................10
Connection to USB Server via CB-6cable.............................................................................11
Connection to external KVM via CB-6cable........................................................................11
Product Specifications .............................................................................................................12
Standard Keyboard / Mouse Specifications ......................................................................14
MAC Keyboard/Mouse Options..............................................................................................15
Supporting layouts ....................................................................................................................15
Keyboard Features ....................................................................................................................15
SUN Keyboard/Mouse Options...............................................................................................16
How to Use "S" Keyboard.........................................................................................................16
On-screen Display Operation (OSD).......................................................................................17
On-screen Display Operation (OSD).......................................................................................18
Options: .......................................................................................................................................19
Options: DC Power ....................................................................................................................20
Options: ORB-2.1- 2-Post Rack Mounting Brackets21
Notes............................................................................................................................................22
nVent.com/SCHROFF |5
INSTALLATION AND MAINTENANCE GUIDE
Before Installation
• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust,
dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1. Disconnect the power cord.
2. Gently wipe the surface using a clean, dry microber cloth. Use as little pressure as possible.
How To Clean Your LCD Monitor
Caution :
• To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor
from or plugging your monitor into an electrical outlet.
• When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen
can scratch or damage your display. Pressure damage is not covered under warranty.
• Use only cleansers made specically for cleaning monitors and monitor screens. Cleansers not
made to clean monitors and monitor screens can scratch the LCD display or strip off the nish.
• Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids
directly onto the screen or case can cause damage which is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1. Disconnect the power cord.
2. Spray a small amount of non-abrasive cleanser on a microber cloth.
3. Gently wipe the surface. Use as little pressure as possible.
4. Wait until your monitor is completely dry before plugging it in and powering it up.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to
6 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Package Content
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI, Touchscreen & DC power.
Structure Diagram
4
3
1LCD interchangeable module kit
Installation Slides
Molded front handle
Audio speaker ( for SDI or HDMI option )
2
8
7
6
5LCD membrane
Micro switch for screen auto power o
Keyboard interchangeable module kit
Mouse interchangeable module kit
- CX-6 6ft DVI-D console cable X 1
( Alternative : CB-6 6ft VGA console cable )
- 2.5A Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 8
6
4
5
8
2
1
3
7
nVent.com/SCHROFF |7
INSTALLATION AND MAINTENANCE GUIDE
Side View
Top View
Front View
The weight is only for the single console models. It varies with accessories & options
UNIT : mm
1mm = 0.03937 inch
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
60118583
60118584
60118585
441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73"
590 x 622 x 140 mm
23.2 x 24.5 x 5.5"
8.6 kg
18.9 lb
13.6 kg
29.9 lb
Rear View
PowerVGADVI-D
Dimension
INSTALLATION AND MAINTENANCE GUIDE
Installation - Installation Slides
• Fix the LCD console drawer into the rack.
Complete the installation
Step 3
• Insert the left and right rear mounting brackets
into the LCD console drawer.
Step 1
Step 2
• Measure the depth of the front and rear
mounting rails.
• Align each rear mounting bracket to a
suitable length.
are provided.
INSTALLATION AND MAINTENANCE GUIDE
Installation - How to use the drawer
• Operate the LCD console drawer.
• Flip up the LCD to a suitable angle.
• Press the handle button and gently
slide out the drawer.
INSTALLATION AND MAINTENANCE GUIDE
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the
servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and
KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Be-
fore attempting to connect anything to the LCD console drawer, we suggest turning off the power to all
devices. Apply power to connected devices again only after the LCD console drawer is receiving power.
The company is not responsible for damage caused in this way.
Connection to USB Server via CX-
DVI-D
LCD Console Drawer
USB server
KVM
CX-6 DVI-D
Power
DVI-DUSB
*Monitor keyboard screen in external power
Connection to external KVM via CX-
DVI-D
DVI console KVM
LCD Console Drawer
Power
CX-6 DVI-D
DVI-D USB
KVM
*Monitor keyboard screen in external power
Ce manuel convient aux modèles suivants
2
Table des matières
Manuels Tiroir LCD populaires d'autres marques
Acnodes
Acnodes KD 8228 Manuel utilisateur
Ameriwood
Ameriwood 9524328PCOM Manuel utilisateur
Kesseböhmer
Kesseböhmer TANDEM solo Manuel utilisateur
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manuel utilisateur
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur
NTI
NTI RACKMUX-V17-N Manuel utilisateur
GRASS
GRASS DWD XP Manuel utilisateur
StarTech.com
StarTech.com DuraView RACKCONS1701 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manuel utilisateur
Fujitsu
Fujitsu RC25 Manuel utilisateur
Acnodes
Acnodes RK 1000B Manuel utilisateur