1
Introduction
DVI-EDID-EMLRT-LC
Product Highlights
Headless operation
Video pass-through
Video Resolutions to 1080p/WUXGA/WQXGA
The DVI-EDID-EMLTR-LC Low-Cost DVI EDID Emulator simulates the presence of an attached DVI display to a DVI video
source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used
with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired DVI display will be copied and stored to the
emulator. Resolutions up to 2560x1600@60Hz are supported (however not in the built-in EDID table) only when used in
combination with an EDID-REC-VDH EDID recorder (sold separately).
Features-DVI
Emulates a DVI display (sink device) by providing Hot Plug Detect and EDID to the DVI source device from the emulator’s
internal memory.
Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA) with default programming.
oDual link resolutions up to 2560x1600 (WQXGA) supported –requires EDID-REC-VDH EDID Recorder (sold
separately) to program dual link resolutions to the emulator.
Supports Emulation and Learning modes.
oEmulation mode: provides EDID to the DVI source device from the emulator’s internal memory.
Supports headless operation – no monitor attached to source.
The selectable resolutions are dependent on the computer’s graphic card.
Only DVI-EDID-EMLTR-LC is necessary for this function.
oLearning mode requires EDID-REC-VDH EDID Recorder (sold separately): store a display’s EDID for later
use.
DVI-EDID-EMLRT-LC
The VGA-EDID-EMLTR-LC Low-Cost VGA EDID Emulator simulates the presence of an attached VGA display to a VGA source
with maximum resolution of 1920x1200p. All resolutions up to 1920x1200@60Hz are supported (however not in the built-in EDID
table) only when used in combination with an EDID-REC-VDH EDID recorder (sold separately).
Features-VGA
Emulates a VGA display (sink device) by providing EDID to the VGA source device from the emulator’s internal memory.
Supports HDTV resolutions to 1080p, and up to 1920x1200p (WUXGA).
Supports Emulation and Learning modes.
oEmulation mode: provides EDID to the VGA source device from the emulator’s internal memory.
Supports headless operation – no monitor attached to source.
The selectable resolutions are dependent on the computer’s graphic card.
Only VGA-EDID-EMLTR-LC is necessary for this function.
oLearning mode requires EDID-REC-VDH EDID Recorder (sold separately): store a display’s EDID for later
use.
Features-Both
Pre-programmed with many standard resolutions with native set to 1920x1080@60Hz (for DVI) and 1280x720@60Hz
(for VGA) emulator.
oRequires EDID-REC-VDH EDID Recorder (sold separately) to program other resolutions to the emulator.
oLED indicators provide signal status information.
Ideal for resolving signal handshaking problems between a source and a display, and for remote desktop access to a
headless computer.
oEnsures that the EDID is not lost in connections between devices such as switches, splitters, and extenders.
EDI
