CHAPTER 2
WARRANTY
Novakon Systems Ltd warrants its CD-100 Computer Driver and machines for a period of one (1) year to
the original purchaser from the date of purchase. If within (1) year from the date of purchase, the CD-
100 Computer Driver and machines fails due to a defect in material or workmanship, Novakon system
Ltd will at their choice repair and/ or replace components with new or remanufactured parts free of
charge.
Most warranty repairs and/or replacements are handled routinely, but sometimes request for warranty
service may not be appropriate. This warranty does not apply to defects due to either directly or
indirectly misuse, abuse, negligence, accidents, repair or lack of routine maintenance.
An investigation will be made by Novakon Systems Ltd to determine whether the warranty applies or
not. To qualify, listed below are some of the causes of machine failure that this warranty does not cover.
1. Normal Wear –All mechanical devices need periodic parts service and replacement. This
warranty does not cover repair when normal use has exhausted the life of the parts or
components.
2. Improper Maintenance –The life of the machine and computer driver depends upon the
conditions under which it operates, and the care it receives. Application of this machine may be
in dusty and dirty environment, which can cause what appears to be premature wear. Such
wear when caused by dirt, dust, cleaning grit, or any abrasive material is not covered under
warranty.
3. Machine Installations –Improper installation of the machine or computer driver can prevent
starting, causes unsatisfactory performance and can shorten machine life.
4. Parts damaged by excessive speed or overheating. Refer to the instruction manual for the
recommended working environment and maintenance schedule.
5. Parts broken by excessive vibration caused by improper mounting of the machine or tools,
installation, unbalances set-up, improper attachment of work pieces or other abuse in
operation.
6. Parts which are determined to have failed due to improper use or excessive wear caused by
continuous use in a production environment. In cases such as this, Novakon systems Ltd will
inspect the machine or part and will be the sole judge of the merit of the claim.
7. Mishandling, improper operation or using the machine for operations other than what they
were intended for.
Transportation charges of parts and/or components submitted for repair and/or replacement under this
warranty are the responsibility of the purchaser. Before returning the machine or component, a Return
