NordicTrack C2155 Treadmill Manuel utilisateur

Serial Number

Decal

Model No. 30811.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if parts are

damaged or missing, PLEASE DO

NOT CONTACT THE STORE. For

assistance, contact our Customer

Service Department.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 8:00 until 17:00 EST

(excluding holidays)

OR E-MAIL US:

customerservice@iconcanada.ca

Visit our website at

www.nordictrack.com

new products, prizes,

fitness tips, and much more!

Write the serial number in the space

above for reference.

USER'S MANUAL

With Universal Dock for iPod®

TABLE OF CONTENTS

WARNINGDECALPLACEMENT..............................................................2

IMPORTANTPRECAUTIONS ................................................................3

BEFOREYOUBEGIN ......................................................................5

ASSEMBLY...............................................................................6

OPERATIONANDADJUSTMENT ............................................................12

OWTOFOLDANDMOVET ETREADMILL ..................................................20

TROUBLES OOTING .....................................................................22

EXERCISEGUIDELINES ...................................................................25

PARTLIST ..............................................................................26

EXPLODEDDRAWING ....................................................................28

ORDERINGREPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY ..............................................................BackCover

NordicTrack is a registered trademark of ICON IP, Inc.

iPod®is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

The decals shown here have been applied

in the locations shown. If a decal is miss-

ing or illegible, call the telephone num-

ber on the front cover of this manual

and request a free replacement decal.

Apply the decal in the location shown.

Note: The decals may not be shown at ac-

tual size.

WARNING DECAL PLACEMENT

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or per-

sons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should be used only by per-

sons weighing 250 lbs. (113 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

12), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable

of carrying 15 or more amps. No other appli-

ance should be on the same circuit. Do not

use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 12.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 22 if the treadmill is

not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 14).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 20.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

23. Never insert any object into any opening on

the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning the

treadmill, and before performing the mainte-

nance and adjustment procedures described in

this manual. Never remove the motor hood un-

less instructed to do so by an authorized ser-

vice representative. Servicing other than the

procedures in this manual should be performed

by an authorized service representative only.

26. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

Thank you for selecting the revolutionary NordicTrack®

C2155 treadmill with Universal Dock for iPod. The

C2155 treadmill offers a selection of features designed

to make your workouts at home more enjoyable and

effective. And when youʼre not exercising, the unique

C2155 treadmill can be folded up, requiring less than

half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

andrail

Upright

Accessory Tray

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Platform Cushion

Foot Rail

Power Cord

Rear Roller

Adjustment Bolts

Console

Speakers

Pulse Sensor

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-

mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,

non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , and rubber mallet .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

#8 x 3/4" Screw (1)–4

3/8" Nut (8)–3

#8 x 1" Tek Screw (2)–4

Base Pad Spacer

(13)–2

1/4" Star

Washer (33)–2

3/8" Star

Washer (9)–4

5/16" Star

Washer (10)–4

5/16" x 3 1/4" Bolt (7)–4

3/8" x 5" Bolt (6)–4

1/4" x 1 1/4" Bolt (5)–2

3/8" x 2" Bolt (4)–3

3. Identify the Right Upright (78) and the Right

Upright Spacer (79), which are marked with

stickers. Insert the Upright Wire (38) through the

Right Upright Spacer as shown.

See the inset drawing. Tie the long tie in the

Right Upright (78) securely around the end of

the Upright Wire (38). With the help of a second

person, hold the Right Upright near the Base

(83). Then, pull the other end of the long tie until

the Upright Wire is routed completely through

the Right Upright.

38 78

2. Remove the 3/8" Nut (8), the 3/8" x 2" Shoulder

Bolt (113), and the shipping bracket (C) from the

Base (83). Attach a Wheel (84) with the Bolt and

the Nut that you just removed. Do not over-

tighten the Nut; the Wheel must turn freely.

Discard the shipping bracket.

113

Long

Tie

Long Tie

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

the treadmill onto its left side. Partially fold the

Frame (56) so that the treadmill is more stable;

do not fully fold the Frame yet.

Remove and discard the two indicated bolts (A)

and the shipping bracket (B).

Cut the ties securing the Upright Wire (38) to the

Base (83). Locate the tie in the indicated hole in

the Base, and use the tie to pull the Upright Wire

out of the hole.

Attach a Base Pad (81) to the Base (83) in the

location shown with a Base Pad Spacer (13) and

a #8 x 1" Tek Screw (2). Then, attach another

Base Pad (81) with only a #8 x 1" Tek Screw (2).

Tie

ole

6. Set the Left Upright Spacer (76) on the Base

(83). With the help of a second person, insert

two 3/8" x 5" Bolts (6) with two 3/8" Star

Washers (9) into the Left Upright (74) and set

the Left Upright into the Left Upright Spacer. If

necessary, use a rubber mallet on top of the Left

Upright to make sure that the Upright is fully in-

serted into the Left Upright Spacer.

Partially tighten the 3/8" x 5" Bolts (6) by turning

them several times; do not fully tighten the

Bolts yet.

Press a Base Endcap (77) into the Base (83).

With the help of a second person, tip the tread-

mill so that the Base (83) is flat on the floor.

5. With the help of a second person, carefully tip

the treadmill onto its right side. Partially fold the

Frame (56) so that the treadmill is more stable;

do not fully fold the Frame yet.

Remove and discard the two indicated bolts (A)

and the shipping bracket (B).

Attach a Base Pad (81) to the Base (83) in the

location shown with a #8 x 1" Tek Screw (2) and

a Base Pad Spacer (13). Then, attach another

Base Pad (81) with only a #8 x 1" Tek Screw (2).

Remove the 3/8" Nut (8), the 3/8" x 2" Shoulder

Bolt (113), and the shipping bracket (C) from the

Base (83). Attach a Wheel (84) with the Bolt and

the Nut that you just removed. Do not over-

tighten the Nut; the Wheel must turn freely.

Discard the shipping bracket.

113

4. Set the Right Upright Spacer (79) on the Base

(83). Be careful not to pinch the Upright Wire

(38). With the help of a second person, insert

two 3/8" x 5" Bolts (6) with two 3/8" Star

Washers (9) into the Right Upright (78) and set

the Right Upright into the Right Upright Spacer.

If necessary, use a rubber mallet on top of the

Right Upright to make sure that the Upright is

fully inserted into Spacer.

Partially tighten the 3/8" x 5" Bolts (6) by turning

them several times; do not fully tighten the

Bolts yet.

Press a Base Endcap (77) into the Base (83).

7. Set the console assembly face down on a soft

surface to avoid scratching the console assem-

bly. old the Right andrail (95) near the con-

sole assembly. Next, insert the console wire into

the large hole in the Right andrail and out of

the top as shown. If necessary, use needlenose

pliers to help pull the console wire out.

Attach the Right andrail (95) and the Left

andrail (not shown) with four #8 x 3/4" Screws

(1) (only two are shown). Make sure that no

wires are pinched. Start all four Screws be-

fore tightening any of them; do not over-

tighten the Screws.

Console

Wire

ole

8. Tighten a 1/4" x 1 1/4" Bolt (5) with a 1/4" Star

Washer (33) into the bracket and andrail

Crossbar (94) on each side of the console as-

sembly (only one side is shown).

Remove the wire tie from the console wire.

Console

Assembly

Wire

Tie

9. Remove the long tie from the Upright Wire (38).

ave a second person hold the console assem-

bly near the Right Upright (78) and Left Upright

(not shown). Connect the Upright Wire (38) to

the console wire. See the inset drawing. The

connectors should slide together easily and

snap into place. If they do not, turn one connec-

tor and try again. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CON-

SOLE MAY BE DAMAGED WHEN THE

POWER IS TURNED ON.

Attach the console assembly to the Right Upright

(78) and Left Upright (not shown) with four 5/16"

x 3 1/4" Bolts (7) and four 5/16" Star Washers

(10) (only two are shown). Be careful not to

pinch the wires.

See steps 4 and 6. Tighten the four 3/8" x 5"

Bolts (6).

Console

Assembly

Console

Wire

Long

Tie

Console

Assembly

Console

Wire

11. Raise the Frame (56) to the position shown.

Have a second person hold the Frame until

this step is completed.

Orient the Storage Latch (53) so that the large

barrel and the Latch Knob (54) are in the posi-

tions shown.

Attach the Latch Bracket (14) and Storage Latch

(53) to the Base (83) with two 3/8" x 2" Bolts (4)

and two 3/8" Nuts (8).

Attach the upper end of the Storage Latch (53)

to the bracket on the Frame (56) with a 3/8" x 2"

Bolt (4) and a 3/8" Nut (8). Note: It may be nec-

essary to move the Frame back and forth to

align the Storage Latch with the bracket.

Lower the Frame (56) (see OW TO LOWER

T E TREADMILL FOR USE on page 21).

Large

Barrel

10. Identify the Storage Latch (53). Remove the tie

from the end of the tube. Make sure that the

sleeve has been slid over hole 1 and that the

Latch Knob (54) is locked into the indicated

hole. Pull on the sleeve to make sure that it is

locked into place.

Sleeve

ole

Tube

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NordicTrack tapis roulant

NordicTrack

NordicTrack C1750PRO 24924.0 Manuel utilisateur

NordicTrack

NordicTrack NTL14010.0 1750 Manuel utilisateur

NordicTrack

NordicTrack NTTL18901 Manuel utilisateur

NordicTrack

NordicTrack Ti Interactive Manuel utilisateur

NordicTrack

NordicTrack NTTL25512 Manuel utilisateur

NordicTrack

NordicTrack T 12.2 Treadmill Guide de démarrage rapide

NordicTrack

NordicTrack NTL61011.2 Manuel utilisateur

NordicTrack

NordicTrack T9ci Treadmill Manuel utilisateur

NordicTrack

NordicTrack C900 Pro Manuel utilisateur

NordicTrack

NordicTrack T18.0 Treadmill Manuel utilisateur

NordicTrack

NordicTrack S25i Manuel utilisateur

NordicTrack

NordicTrack X7i incline trainer NTL19910.0 Manuel utilisateur

NordicTrack

NordicTrack Ex 3300 Treadmill Guide de démarrage rapide

NordicTrack

NordicTrack NTL79011.4 Manuel utilisateur

NordicTrack

NordicTrack T18.0 Treadmill Manuel d'utilisation et d'entretien

NordicTrack

NordicTrack NTL19011.0 Manuel utilisateur

NordicTrack

NordicTrack NTL15922 Manuel utilisateur

NordicTrack

NordicTrack C 2500 NTL09007.0 Manuel utilisateur

NordicTrack

NordicTrack T 12.2 Treadmill Manuel utilisateur

NordicTrack

NordicTrack 5100 R NTTL18513 Manuel utilisateur

NordicTrack

NordicTrack T6.7i Manuel utilisateur

NordicTrack

NordicTrack ELITE NTL19007.1 Manuel utilisateur

NordicTrack

NordicTrack X7i Incline Trainer Manuel utilisateur

NordicTrack

NordicTrack NTL15809.1 Manuel utilisateur

Manuels tapis roulant populaires d'autres marques

Treadly

Treadly TREADLY 2 Manuel utilisateur

HEALTH ONE

HEALTH ONE Walk Ro Manuel utilisateur

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manuel utilisateur

Merax

Merax MS282992 Manuel utilisateur

FYTTER

FYTTER RU-2SX Manuel utilisateur

Precor

Precor 903 Manuel utilisateur

FitLogic

FitLogic freewill d225 Manuel utilisateur

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manuel utilisateur

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manuel utilisateur

Stamia

Stamia InMotion II Manuel utilisateur

Smooth Fitness

Smooth Fitness EVO 3i Manuel utilisateur

Schwinn

Schwinn 830/Journey 8.0 Manuel utilisateur

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manuel utilisateur

Spirit

Spirit XT8 Manuel utilisateur

Master

Master F22 Manuel utilisateur

Precor

Precor PRECISION SERIES Manuel technique

Horizon Fitness

Horizon Fitness DT680 Manuel utilisateur

Matrix

Matrix T130 XI Manuel utilisateur