Nokia BH-606 Manuel utilisateur

Nokia Bluetooth Headset BH-606

9212626/1

ENGLISH

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this HS-128W product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC.

A copy of the Declaration of Conformity can

be found at http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of Nokia

Corporation. Other product and company

names mentioned herein may be trademarks

or tradenames of their respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Nokia operates a policy of ongoing

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

To the maximum extent permitted by

applicable law, under no circumstances shall

Nokia or any of its licensors be responsible

for any loss of data or income or any special,

incidental, consequential or indirect

damages howsoever caused.

The contents of this document are provided

“as is”. Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made

in relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior notice.

The availability of particular products may

vary by region. Please check with your Nokia

dealer for details.

Export controls

This device may contain commodities,

technology or software subject to export

laws and regulations from the US and other

countries. Diversion contrary to law is

prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Headset

BH-606, you can make and receive

calls while on the move.

Read this user guide carefully before

using the headset. Also, read the user

guide for your phone. This product

may contain small parts. Keep them

out of the reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology allows

you to connect compatible devices

without cables. The phone and the

headset do not need to be in line of

sight, but they should be within

10 metres (33 feet) of each other.

Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

The headset is compliant with the

Bluetooth Specification 2.0 + EDR

supporting the Headset Profile 1.1 and

Hands-Free Profile 1.5. Check with the

manufacturers of other devices to

determine their compatibility with

this device.

Get started

The headset contains the following

parts shown on the title page: white

indicator light (1), earloop (2), volume

key (3), power key (4), answer/end key

(5), earpiece (6), charger connector

(7), and microphone (8).

Before using the headset, you must

charge the battery and pair the

headset with a compatible phone.

Parts of the device are magnetic.

Metallic materials may be attracted to

ENGLISH

the device. Do not place credit cards

or other magnetic storage media near

the device, because information

stored on them may be erased.

Charge the battery

Before charging the battery, carefully

read “Battery and charger

information”.

Warning: Use only

chargers approved by Nokia

for use with this particular

model. The use of any other types may

invalidate any approval or warranty,

and may be dangerous.

When you disconnect the power cord

of any accessory, grasp and pull the

plug, not the cord.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to the

charger connector. During

charging, the indicator light is on

and the headset cannot be used.

Charging the battery fully may take

up to 2 hours.

3. When the battery is fully charged,

the indicator light turns off.

Disconnect the charger from the

headset, then from the wall outlet.

If the headset was connected to

your phone before charging,

the headset connects to it again.

The fully charged battery has power

for up to 8 hours of talk time or up to

280 hours of standby time.

When the battery is discharged, the

headset beeps every minute and the

indicator light flashes quickly.

Switch on or off

To switch on, press and hold the power

key for about 2 seconds. The headset

beeps, and the indicator light is

displayed. The headset tries to connect

to a paired phone.

ENGLISH

To switch off, press and hold the power

key for about 2 seconds. The headset

beeps, and the indicator light turns off.

Pair the headset

1. Ensure that your phone is on and

the headset is off.

2. Press and hold the power key

(for about 5 seconds) until the

indicator light starts to flash quickly.

3. Activate the Bluetooth feature on

the phone, and set it to search for

Bluetooth devices.

4. Select the headset from the list of

found devices.

5. Enter the passcode 0000 to pair

and connect the headset to your

phone. In some phones, you may

need to make the connection

separately after pairing.

When the headset is connected to

your phone and is ready for use, the

indicator light flashes about every

5 seconds.

Basic use

Place the headset on the ear

Slide the earloop behind your ear, and

point the headset toward your mouth

(9 and 10). Gently push the earpiece

into your ear. To use the headset on

the left ear, detach the earloop (11),

flip it, and push it into place (12).

Calls

To make a call, use your phone in the

normal way when the headset is

connected to it.

To redial the number you last called

(if your phone supports this feature

ENGLISH

with the headset), when no call is

in progress, press the answer/end

key twice.

To activate voice dialling (if your

phone supports this feature with the

headset), when no call is in progress,

press and hold the answer/end key for

about 2 seconds. Proceed as described

in the phone user guide.

To answer or end a call, press the

answer/end key. To reject a call,

press this key twice.

To set the headset volume, slide the

volume key up or down.

To mute or unmute the microphone

during a call, press the middle of the

volume key.

To switch a call between the headset

and a compatible phone, press and

hold the answer/end key (or the power

key) for about 2 seconds.

Handle two calls

To answer a waiting call and put the

active call on hold, press and hold the

answer/end key for about 2 seconds.

To answer a waiting call and end the

active call, press the answer/end key.

To end the active call and activate the

call on hold, press the answer/end key.

To switch between the active call and

the call on hold, press and hold the

answer/end key for about 2 seconds.

To use these features, your phone

must support the Bluetooth Hands-

Free profile 1.5, and call waiting

(network service) must be activated

in the phone.

Clear settings or reset

To delete the pairings from the

headset, switch off the headset, and

press and hold the power key and the

answer/end key for about 5 seconds.

ENGLISH

To reset the headset if it stops

functioning, even though it is charged,

connect the headset to a charger that

is connected to a wall outlet.

Troubleshooting

If you cannot connect the headset to

your compatible phone, check that the

headset is charged, switched on, and

paired with the phone.

Battery and charger information

This device has an internal, nonremovable,

rechargeable battery. Do not attempt to

remove the battery from the device as you

may damage the device. This device is

intended for use when supplied with

power from the following chargers: AC-3,

AC-4, AC-5, and DC-4. The exact charger

model number may vary depending on the

type of plug. The plug variant is identified

by one of the following: E, EB, X, AR, U, A,

C, or UB. The battery can be charged and

discharged hundreds of times, but it will

eventually wear out. Recharge your

battery only with Nokia approved chargers

designated for this device. Use of an

unapproved charger may present a risk of

fire, explosion, leakage, or other hazard.

If a battery is being used for the first time

or if the battery has not been used for a

prolonged period, it may be necessary to

connect the charger, then disconnect and

reconnect it to begin charging the

battery. If the battery is completely

discharged, it may take several minutes

before the charging indicator light is

displayed.

Unplug the charger from the electrical

plug and the device when not in use.

Do not leave a fully charged battery

connected to a charger, since

overcharging may shorten its lifetime.

If left unused, a fully charged battery

will lose its charge over time.

ENGLISH

Always try to keep the battery between

15°C and 25°C (59°F and 77°F). Extreme

temperatures reduce the capacity and

lifetime of the battery. A device with a

hot or cold battery may not work

temporarily. Battery performance is

particularly limited in temperatures well

below freezing.

Do not dispose of batteries in a fire as

they may explode. Batteries may also

explode if damaged.

Never use any charger that is damaged.

Important: Battery talk and

standby times are estimates

only and depend on network

conditions, features used, battery age

and condition, temperatures to which

battery is exposed, and many other

factors. The amount of time a device is

used for calls will affect its standby time.

Likewise, the amount of time that the

device is turned on and in the standby

mode will affect its talk time.

Care and maintenance

Your device is a product of superior

design and craftsmanship and should

be treated with care. The following

suggestions will help you protect your

warranty coverage.

• Keep the device dry. Precipitation,

humidity, and all types of liquids or

moisture can contain minerals that

will corrode electronic circuits. If your

device does get wet, allow it to dry

completely.

• Do not use or store the device in

dusty, dirty areas. Its moving parts

and electronic components can be

damaged.

• Do not store the device in hot areas.

High temperatures can shorten the life

of electronic devices, damage batteries,

and warp or melt certain plastics.

ENGLISH

• Do not store the device in cold areas.

When the device returns to its normal

temperature, moisture can form

inside the device and damage

electronic circuit boards.

• Do not attempt to open the device.

• Do not drop, knock, or shake the

device. Rough handling can break

internal circuit boards and fine

mechanics.

• Do not use harsh chemicals, cleaning

solvents, or strong detergents to

clean the device.

• Do not paint the device. Paint can

clog the moving parts and prevent

proper operation.

These suggestions apply equally to your

device, charger, or any accessory. If any

device is not working properly, take it to

the nearest authorised service facility for

service.

Disposal

The crossed-out wheeled-bin

symbol on your product,

literature, or packaging reminds

you that all electrical and

electronic products, batteries, and

accumulators must be taken to separate

collection at the end of their working life.

This requirement applies to the European

Union and other locations where

separate collection systems are available.

Do not dispose of these products as

unsorted municipal waste.

By returning the products to collection

you help prevent uncontrolled waste

disposal and promote the reuse of

material resources. More detailed

information is available from the product

retailer, local waste authorities, national

producer responsibility organisations, or

your local Nokia representative. For the

product Eco-Declaration or instructions

for returning your obsolete product,

go to country-specific information at

www.nokia.com.

ENGLISH

FCC/Industry Canada notice

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: 1. This device may not cause

harmful interference; and 2. This device

must accept any interference received,

including interference that may cause

undesired operation. This equipment has

been tested and found to comply with the

limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and,

if not installed and used in accordance with

the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver. Connect the

equipment into an outlet on a circuit

different from that to which the receiver

is connected. Consult the dealer or an

experienced radio/TV technician for help.

NOTE: FCC Radiation Exposure Statement:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be

co-located or operating in conjunction

with any other antenna or transmitter.

NOTE: Changes or modifications not

expressly approved by Nokia could void the

user’s authority to operate the equipment.

Autres manuels pour BH-606

Table des matières

Langues :

Autres manuels Nokia casque

Nokia

Nokia DVB-H Manuel utilisateur

Nokia

Nokia BH 104 - Headset - Over-the-ear Guide d'installation

Nokia

Nokia LCH-6 Manuel utilisateur

Nokia

Nokia BH-606 Manuel utilisateur

Nokia

Nokia Bluetooth Headset BH-701 Manuel utilisateur

Nokia

Nokia BH-806 Manuel utilisateur

Nokia

Nokia BH-607 Manuel utilisateur

Nokia

Nokia Bluetooth Headset BH-701 Manuel utilisateur

Nokia

Nokia BH-101 Manuel utilisateur

Nokia

Nokia BH-208 Manuel utilisateur

Nokia

Nokia HDE-2 - Headset - Ear-bud Manuel utilisateur

Nokia

Nokia HS-16 Manuel utilisateur

Nokia

Nokia BH 604 - Headset - Binaural Manuel utilisateur

Nokia

Nokia HS-2R - Personal Radio Manuel utilisateur

Nokia

Nokia BH 600 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-800 Manuel utilisateur

Nokia

Nokia BH 103 - Headset - In-ear ear-bud Manuel utilisateur

Nokia

Nokia HS 36W Manuel utilisateur

Nokia

Nokia BH-503 Manuel utilisateur

Nokia

Nokia BH-206 Manuel utilisateur

Nokia

Nokia BH 600 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-303 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-500 Manuel utilisateur

Nokia

Nokia BH-602 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur