Nokia BH-505 Manuel utilisateur

Nokia Bluetooth Stereo Headset

BH-505

Issue 3.0

ENGLISH

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this BH-505 product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be

found at http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Nokia operates a policy of continuous

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

To the maximum extent permitted by

applicable law, under no circumstances shall

Nokia or any of its licensors be responsible

for any loss of data or income or any special,

incidental, consequential or indirect

damages howsoever caused.

The contents of this document are provided

"as is". Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made in

relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior notice.

The availability of particular products may

vary by region. Please check with your Nokia

dealer for details. This device may contain

commodities, technology or software

subject to export laws and regulations from

the US and other countries. Diversion

contrary to law is prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Stereo

Headset BH-505, you can make and

answer calls hands-free with your

compatible mobile device. You can

also listen to music from a compatible

music player.

Read this user guide carefully before

using the headset. Also, read the user

guide for the device that you connect

to the headset.

This product may contain small parts.

Keep them out of the reach of small

children.

Note: The surface of this

device does not contain

nickel in the platings. The

surface of this device

contains stainless steel.

Bluetooth wireless technology

Bluetooth wireless technology allows

you to connect compatible devices

without cables. The headset and the

other device do not need to be in line

of sight, but they should be within 10

metres (33 feet) of each other.

Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the following profiles:

Headset Profile 1.1, Hands-Free

Profile (HFP) 1.5, Advanced Audio

Distribution Profile (A2DP) 1.2, and

Audio Video Remote Control Profile

1.0. Check with the manufacturers of

other devices to determine their

compatibility with this device.

ENGLISH

Get started

The headset contains the following

parts shown on the title page:

indicator light (1), cover of the

charger connector (2), power key (3),

answer/end key (4), earplugs (5),

volume key (6), rewind/fast-forward

key (7), microphone (8), and play/

pause key (9).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic.

Metallic materials may be attracted to

the device. Do not place credit cards

or other magnetic storage media near

the device, because information

stored on them may be erased.

Charge the battery

Before charging the battery, carefully

read “Battery and charger

information”.

Warning: Use only chargers

approved by Nokia for use

with this particular model.

The use of any other types

may invalidate any approval

or warranty, and may be

dangerous. Use of

unapproved chargers may

present a risk of fire,

explosion, or other hazard.

When you disconnect the

power cord of any accessory, grasp

and pull the plug, not the cord.

1. Connect the charger to a wall

outlet.

2. Lift the cover of the charger

connector from the edge, and

connect the charger cable to the

connector. The red indicator light is

displayed during charging.

Charging the battery fully may take

up to 2 hours.

ENGLISH

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet. Press the cover on the

charger connector.

The fully charged battery has power

for up to 12 hours of talk time, up to

375 hours of standby time, or up to 10

hours of music playing time.

To check the battery charge when the

headset is not connected to a charger,

press the power key when the headset

is connected to a mobile device. If the

indicator light is green, the charge

level is sufficient. If the light is yellow,

you may need to recharge the battery

soon. If the light is red, recharge the

battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the power

key for about 5 seconds. The headset

beeps, and the green indicator light

flashes slowly while the headset tries

to connect to a last used device that

supports the HFP Bluetooth profile.

When the headset is connected to a

device and is ready for use, the blue

indicator light flashes slowly. If the

headset has not been paired with a

device, it automatically enters pairing

mode.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the headset

is not connected to a device within

about 30 minutes, it switches off

automatically.

ENGLISH

Pair and connect the headset

Before using the headset, you must

pair and connect it to a compatible

device.

If your mobile device supports the

A2DP Bluetooth profile and has a

music player feature, you can use the

device to also play music through the

headset.

If your mobile device does not support

the A2DP profile, you can separately

pair the headset with the mobile

device and a music player that

supports this profile. If you have

paired and connected the headset to

your mobile device, disconnect the

headset from it before pairing the

headset with the music player.

To pair and connect the headset to

your device if the device supports the

Near Field Communication (NFC)

feature, activate the feature, and use

your device to touch the area shown

in figure 10 at the start of this guide.

For details on NFC, see the user guide

of your device.

To pair and connect the headset to

your device if the device does not

support NFC:

1. Ensure that your mobile device or

music player is switched on and

the headset is off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The headset

enters pairing mode, and the blue

indicator light starts to flash

quickly.

If the headset has been previously

paired with a device, ensure that

the headset is switched off, and

press and hold the power key (for

about 8 seconds) until the blue

indicator light starts to flash

quickly.

ENGLISH

3. Within about 3 minutes, activate

the Bluetooth feature on your

device, and set it to search for

Bluetooth devices. For details, see

the user guide of your device.

4. Select the headset from the list of

found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device. If your

device does not have a keypad, it

may use this passcode by default.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to

your device and is ready for use, the

blue indicator light flashes slowly.

You can pair the headset with up to

eight devices but connect it to only

one device supporting the HFP profile

and another device supporting the

A2DP profile at a time.

To manually connect the headset to a

last used device that supports the HFP

profile (for example, after connection

loss), switch the headset off and on, or

press and hold the answer/end key for

about 2 seconds. To manually connect

the headset to a last used device that

supports the A2DP profile, press the

play/pause key.

You may be able to set your device so

that the headset connects to it

automatically. To activate this feature

in a Nokia device, change the paired

device settings in the Bluetooth menu.

ENGLISH

Basic use

Change the earplugs

The headset may be provided with

different sized earplugs and earpads.

Select the earplugs or earpads that fit

the best and are the most comfortable

for your ears.

To change the current earplugs, pull

them from the earpieces, and push the

new earplugs or earpads into place.

Wear the headset

Place the headset behind your head so

that the speaker pads rest comfortably

on your ears (11).

Place the speaker pad that has the

play/pause key on the left ear and the

pad that has the answer/end key on

the right ear.

Gently insert the earplugs into your

ears.

Warning: When you use the

headset, your ability to hear

outside sounds may be

affected. Do not use the

headset where it can

endanger your safety.

Adjust the volume

To adjust the headset volume, slide

the volume key up or down when the

headset is connected to a device. To

adjust the volume quickly, slide and

hold the key.

You can also adjust the headset

volume on the connected A2DP device

if it supports this feature.

Calls

To make a call, use your mobile device

in the normal way when the headset is

connected to it.

ENGLISH

To redial the number you last called (if

your mobile device supports this

feature with the headset), when no

call is in progress, press the answer/

end key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds. Proceed

as described in the user guide of the

mobile device.

To answer or end a call, press the

answer/end key. To reject a call, press

this key twice.

To mute or unmute the microphone

during a call, press the play/pause key.

The headset beeps.

To switch a call from the headset to a

compatible mobile device, press and

hold the answer/end key for about 2

seconds, or switch off the headset. To

switch the call back to the headset,

press and hold the answer/end key for

about 2 seconds, or switch on the

headset.

Listen to music

To listen to music, connect the

headset to a compatible music player

that supports the A2DP Bluetooth

profile.

The available music functions depend

on your music player.

If you receive or make a call while

listening to music, the music is paused

until you end the call.

Warning: Continuous

exposure to high volume may

damage your hearing. Listen

to music at a moderate level.

To play a song, select it in the music

player, and press the play/pause key.

To pause or resume playing, press the

play/pause key. To stop playing, press

and hold this key.

Table des matières

Autres manuels Nokia casque

Nokia

Nokia BH 600 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia HS 26W - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-503 Manuel utilisateur

Nokia

Nokia BH-806 Manuel utilisateur

Nokia

Nokia Essence BH-610 Manuel utilisateur

Nokia

Nokia BH 212 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia HDW 3 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-608 Manuel utilisateur

Nokia

Nokia Bluetooth Headset BH-701 Manuel utilisateur

Nokia

Nokia Bluetooth Headset BH-701 Manuel utilisateur

Nokia

Nokia BH 301 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia DAB Manuel utilisateur

Nokia

Nokia HS-27R Manuel utilisateur

Nokia

Nokia HS-12W Manuel utilisateur

Nokia

Nokia WH-700 Manuel utilisateur

Nokia

Nokia HS-82 Manuel utilisateur

Nokia

Nokia BH 213 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-501 Manuel utilisateur

Nokia

Nokia Comm Band + CB-201 Manuel utilisateur

Nokia

Nokia BH 103 - Headset - In-ear ear-bud Manuel utilisateur

Nokia

Nokia BH 104 - Headset - Over-the-ear Guide d'installation

Nokia

Nokia HS 36W Manuel utilisateur

Nokia

Nokia HS-37W Manuel utilisateur

Nokia

Nokia HDE-2 - Headset - Ear-bud Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur