Nokia BH 102 - Headset - Over-the-ear Manuel utilisateur

Nokia Bluetooth Headset BH-102

Issue

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this HS-107W product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity

can be found at http://www.nokia.com/

phones/declaration_of_conformity/.

Nokia and Nokia Connecting People are

registered trademarks of Nokia

Corporation. Other product and

company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in

this document in any form without the

prior written permission of Nokia is

prohibited.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Nokia operates a policy of ongoing

development. Nokia reserves the right to

make changes and improvements to any

of the products described in this

document without prior notice.

To the maximum extent permitted by

applicable law, under no circumstances

shall Nokia or any of its licensors be

responsible for any loss of data or

income or any special, incidental,

consequential or indirect damages

howsoever caused.

The contents of this document are

provided "as is". Except as required by

applicable law, no warranties of any

kind, either express or implied,

including, but not limited to, the implied

warranties of merchantability and

fitness for a particular purpose, are

made in relation to the accuracy,

reliability or contents of this document.

Nokia reserves the right to revise this

document or withdraw it at any time

without prior notice.

The availability of particular products

may vary by region. Please check with

your Nokia dealer for details.

Export controls

This device may contain commodities,

technology or software subject to export

laws and regulations from the US and

other countries. Diversion contrary to

law is prohibited.

Introduction

With the Nokia Bluetooth Headset

BH-102, you can make and receive

calls while on the move. You can

use the headset with compatible

phones that support Bluetooth

wireless technology.

Read this user guide carefully

before using the headset. Also,

read the user guide for your phone.

It provides important safety and

maintenance information. Keep

the headset out of the reach of

small children.

Bluetooth wireless

technology

Bluetooth wireless technology

allows you to connect compatible

devices without cables. The phone

and the headset do not need to be

in line of sight, but they should be

within 10 metres (33 feet) of each

other. Connections may be subject

to interference from obstructions,

such as walls, or other electronic

devices.

The headset complies with the

Bluetooth Specification 2.0 + EDR

that supports the Headset Profile

1.1 and Hands-Free Profile 1.5.

Check with the manufacturers of

other devices to determine their

compatibility with this device.

Get started

The headset contains the

following parts shown on the title

page: earloop (1), charger

connector (2), earpiece (3), blue

indicator light (4), multifunction

key (5), and microphone (6).

Before using the headset, you

must charge the battery and pair

the headset with a compatible

phone.

Parts of the device are magnetic.

Metallic materials may be attracted

to the device. Do not place credit

cards or other magnetic storage

media near the device, because

information stored on them may be

erased.

Chargers

This device is intended for use when

supplied with power from the

following chargers: AC-3, AC-4,

AC-5, and DC-4.

Warning: Use only

chargers approved by

Nokia for use with this

particular enhancement. The use of

any other types may invalidate any

approval or warranty, and may be

dangerous.

When you disconnect the power cord

of any enhancement, grasp and pull

the plug, not the cord.

Charge the battery

Before charging the battery,

carefully read “Battery

information”.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to

the charger connector (8). The

indicator light is on during

charging. Charging the battery

fully may take up to 2 hours.

3. When the battery is fully

charged, the indicator light

turns off. Disconnect the

charger from the headset and

the wall outlet.

The fully charged battery has

power for up to 10 hours of talk

time or up to 250 hours of standby

time.

When battery power is low, the

headset beeps once every minute

and the indicator light flashes

quickly.

Switch on or off

To switch on, press and hold the

multifunction key for about 2 to 4

seconds. The headset beeps, and

the indicator light is displayed. The

headset tries to connect to a

paired device.

To switch off, press and hold the

multifunction key for about 4 to 8

seconds.

Pair the headset

1. Ensure that your phone is

switched on and the headset is

switched off.

2. Press and hold the

multifunction key (for about 4

to 8 seconds) until the

indicator light starts to flash

quickly.

3. Activate the Bluetooth feature

on the phone, and set the

phone to search for Bluetooth

devices.

4. Select the headset from the list

of found devices.

5. Enter the passcode 0000 to

pair and connect the headset to

your phone. In some phones,

you may need to make the

connection separately after

pairing. You only need to pair

the headset with your phone

once.

If the pairing is successful, the

headset appears in the phone

menu where you can view the

currently paired Bluetooth

devices.

When the headset is connected to

your phone and is ready for use,

the indicator light flashes slowly.

Basic use

Put on the headset

To use the headset on your right

ear, attach the earloop as shown in

Figure 7; to use the headset on

your left ear, attach the earloop

from the other side. Slide the

earloop over your ear (9), and

gently push the earpiece into your

ear. Point the headset towards

your mouth (10).

Call handling

To make a call, use your phone in

the normal way when the headset

is connected to your phone.

To redial the number you last

called (if your phone supports this

feature with the headset), when

no call is in progress, press the

multifunction key twice.

To activate voice dialling (if your

phone supports this feature with

the headset), when no call is in

progress, press and hold the

multifunction key for about 2 to 4

seconds. Proceed as described in

the phone user guide.

To answer or end a call, press the

multifunction key. To reject a call,

press this key twice.

To adjust the volume during a call,

use the phone volume keys.

To switch a call between the

headset and a compatible phone,

press and hold the multifunction

key for about 2 to 4 seconds.

Clear settings or reset

To delete the pairings from the

headset, switch off the headset,

and press and hold the

multifunction key for over 8

seconds until the headset beeps

twice and the indicator light

flashes quickly.

To reset the headset if it stops

functioning, even though it is

charged, plug the headset into a

charger.

Troubleshooting

If you cannot connect the headset

to your compatible phone, check

that the headset is charged,

switched on, and paired with your

phone.

Battery information

This device has an internal,

nonremovable, rechargeable battery.

Do not attempt to remove the battery

from the device as you may damage

the device. The battery can be

charged and discharged hundreds of

times, but it will eventually wear out.

Recharge your battery only with

Nokia approved chargers designated

for this device. Use of an unapproved

charger may present a risk of fire,

explosion, leakage, or other hazard.

If a battery is being used for the first

time or if the battery has not been

used for a prolonged period, it may be

necessary to connect the charger,

then disconnect and reconnect it to

begin charging the battery. If the

battery is completely discharged, it

may take several minutes before the

charging indicator light is displayed.

Unplug the charger from the

electrical plug and the device when

not in use. Do not leave a fully

charged battery connected to a

charger, since overcharging may

shorten its lifetime. If left unused, a

fully charged battery will lose its

charge over time.

Always try to keep the battery

between 15°C and 25°C (59°F and

77°F). Extreme temperatures reduce

the capacity and lifetime of the

battery. A device with a hot or cold

battery may not work temporarily.

Battery performance is particularly

limited in temperatures well below

freezing.

Do not dispose of batteries in a fire as

they may explode. Batteries may also

explode if damaged.

Never use any charger that is

damaged.

Important: Battery talk

and standby times are

estimates only and

depend on network conditions,

features used, battery age and

condition, temperatures to which

battery is exposed, and many other

factors. The amount of time a device

is used for calls will affect its standby

time. Likewise, the amount of time

that the device is turned on and in

the standby mode will affect its talk

time.

Care and maintenance

Your device is a product of superior

design and craftsmanship and should

be treated with care. The following

suggestions will help you protect

your warranty coverage.

• Keep the device dry. Precipitation,

humidity, and all types of liquids

or moisture can contain minerals

that will corrode electronic

circuits. If your device does get

wet, allow it to dry completely.

• Do not use or store the device in

dusty, dirty areas. Its moving parts

and electronic components can

be damaged.

• Do not store the device in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries, and

warp or melt certain plastics.

• Do not store the device in cold

areas. When the device returns to

its normal temperature, moisture

can form inside the device and

damage electronic circuit boards.

• Do not attempt to open the

device.

• Do not drop, knock, or shake the

device. Rough handling can break

internal circuit boards and fine

mechanics.

• Do not use harsh chemicals,

cleaning solvents, or strong

detergents to clean the device.

• Do not paint the device. Paint can

clog the moving parts and prevent

proper operation.

If the device is not working properly,

take it to the nearest authorised

service facility for service.

Autres manuels pour BH 102 - Headset - Over-the-ear

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nokia casque

Nokia

Nokia HS 26W - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-606 Manuel utilisateur

Nokia

Nokia BH-505 Manuel utilisateur

Nokia

Nokia BH-101 Manuel utilisateur

Nokia

Nokia BH-101 Manuel utilisateur

Nokia

Nokia BH-902 Manuel utilisateur

Nokia

Nokia HDE-2 - Headset - Ear-bud Manuel utilisateur

Nokia

Nokia BH-702 Manuel utilisateur

Nokia

Nokia BH-500 Manuel utilisateur

Nokia

Nokia HS-123W Manuel utilisateur

Nokia

Nokia HS HS 4W Manuel utilisateur

Nokia

Nokia BH 202 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-905I Manuel utilisateur

Nokia

Nokia hs-13w - Wireless Image Headset Manuel utilisateur

Nokia

Nokia BH-302 Manuel utilisateur

Nokia

Nokia hs-13w - Wireless Image Headset Manuel utilisateur

Nokia

Nokia BH-501 Manuel utilisateur

Nokia

Nokia BH-304 Manuel utilisateur

Nokia

Nokia BH-803 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia Comm Band + CB-201 Manuel utilisateur

Nokia

Nokia WH-700 Manuel utilisateur

Nokia

Nokia HS 36W Manuel utilisateur

Nokia

Nokia BH-606 Manuel utilisateur

Nokia

Nokia HS-21W Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur