Nokia BH-219 Manuel utilisateur

Nokia Bluetooth Headset BH-219

Issue 2.0

ENGLISH

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this BH-219 product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be

found at http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Nokia operates a policy of continuous

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

To the maximum extent permitted by

applicable law, under no circumstances shall

Nokia or any of its licensors be responsible

for any loss of data or income or any special,

incidental, consequential or indirect

damages howsoever caused.

The contents of this document are provided

"as is". Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made in

relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior notice.

The availability of products may vary by

region. For more information, contact your

Nokia dealer. This device may contain

commodities, technology or software

subject to export laws and regulations from

the US and other countries. Diversion

contrary to law is prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Headset

BH-219, you can make and answer

calls hands-free with your compatible

mobile device.

Read this user guide carefully before

using the headset. Also, read the user

guide for the device that you connect

to the headset.

The surface of this device is nickel-

free.

This product may contain small parts.

Keep them out of the reach of small

children.

Bluetooth wireless technology

Bluetooth wireless technology allows

you to connect compatible devices

without cables. The headset and the

other device do not need to be in line

of sight, but they should be within 10

metres (33 feet) of each other.

Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the Headset Profile 1.1 and

Hands-Free Profile 1.5. Check with the

manufacturers of other devices to

determine their compatibility with

this device.

ENGLISH

Get started

The headset contains the following

parts shown on the title page:

multifunction key (1), Near Field

Communication (NFC) area (2),

charger connector (3), microphone (4),

earloop (5), earpiece (6), and indicator

light (7).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic. Metallic

materials may be attracted to the device.

Do not place credit cards or other

magnetic storage media near the device,

because information stored on them may

be erased.

Charge the battery

Before charging the battery, carefully

read “Battery and charger

information”.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to the

charger connector (8). The red

indicator light is displayed during

charging.

Charging the battery fully may take

up to 2 hours.

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet.

When you unplug a charger, hold

and pull the plug, not the cord.

The fully charged battery has power

for up to 6 hours of talk time or up to

100 hours of standby time.

To check the battery charge when the

headset is not connected to a charger,

ENGLISH

press the multifunction key when the

headset is connected to a mobile

device. If the indicator light is green,

the charge level is sufficient. If the

light is yellow, you may need to

recharge the battery soon. If the light

is red, recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch the headset on

To switch on, press the multifunction

key. If your device supports the Near

Field Communication (NFC) feature,

make sure the feature is activated in

the device, and touch the NFC area of

the device with the NFC area of the

headset. For details on NFC, see the

user guide of your device.

The headset beeps, and the green

indicator light flashes slowly while the

headset tries to connect to one or two

last connected devices.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes slowly.

If the headset has not been paired

with a device, it automatically enters

pairing mode.

Switch the headset off

To switch off, press and hold the

multifunction key for about 5 seconds.

The headset beeps, and the red

indicator light is briefly displayed.

If the headset is not connected to a

device within about 30 minutes, it

switches off automatically.

Pair and connect the headset

Before using the headset, you must

pair and connect it to a compatible

device.

You can pair the headset with up to

eight devices, but you can connect it

ENGLISH

to a maximum of two devices at a

time.

To pair and connect the headset to

your device if the device supports NFC,

make sure the headset is off and NFC

is activated in the device, and touch

the NFC area of the device with the

NFC area of the headset.

To pair and connect the headset to

your device if the device does not

support NFC:

1. Make sure your mobile device is

switched on and the headset is off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The headset

enters pairing mode, and the blue

indicator light starts to flash

quickly.

If the headset has been previously

paired with a device, make sure the

headset is switched off, and press

and hold the multifunction key for

about 5 seconds until the blue

indicator light starts to flash

quickly.

3. Within about 3 minutes, activate

Bluetooth on your device, and set it

to search for Bluetooth devices. For

details, see the user guide of your

mobile device.

4. Select the headset from the list of

found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes slowly.

To manually connect the last used

device, press and hold the

multifunction key for about 2 seconds

(when no other device is connected),

ENGLISH

or make the connection in the

Bluetooth menu of the device.

To manually connect or disconnect

your device if it supports NFC, touch

the NFC area of the device with the

NFC area of the headset.

You may be able to set your device so

that the headset connects to it

automatically. To activate this feature

in a Nokia device, modify the paired

device settings in the Bluetooth menu.

Basic use

Change the earpad

The headset may be provided with

different sized earpads. Select the

earpad that fits the best and is the

most comfortable for your ear.

To change the earpad, pull the current

earpad from the earpiece, and push

the new earpad into place (9).

Place the headset on the ear

To use the headset with the earloop,

attach the earloop to it (11). To detach

the earloop, gently pull it from the

headset.

You can rotate the earpad to keep the

headset securely in the ear (10). For

example, if you use the headset on the

right ear, you may need to rotate the

earpad to the right for the best fit. If

you wear an earring, make sure it is

not accidentally attached to the

earpad.

To place the headset on the ear, slide

the earloop behind your ear (12), and

gently push the earpiece against your

ear. Point the headset towards your

mouth (13).

ENGLISH

Adjust volume

The headset automatically adjusts the

volume according to ambient noise. To

manually adjust the volume, use the

volume controls of the connected

device.

The selected volume level is saved for

the device that is currently connected

to the headset.

Calls

To make a call, use your mobile device

in the normal way when the headset is

connected to it.

To redial the number you last called (if

your mobile device supports this

feature with the headset), when no

call is in progress, press the

multifunction key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the

multifunction key for about 2 seconds.

Proceed as described in the user guide

of the mobile device.

To answer or end a call, press the

multifunction key (14). To reject a call,

press the multifunction key twice.

To switch a call between the headset

and a compatible connected device,

press and hold the multifunction key

for about 2 seconds.

Connect to two devices

The headset can be connected to two

devices at the same time.

Pair and connect to two devices

To pair the headset with two devices,

switch on the headset, activate

pairing mode, and pair it with the first

device. Switch off the headset,

activate pairing mode, and pair it with

the second device.

Autres manuels pour BH-219

Table des matières

Autres manuels Nokia casque

Nokia

Nokia HS HS 4W Manuel utilisateur

Nokia

Nokia HS-20 Manuel utilisateur

Nokia

Nokia BH 604 - Headset - Binaural Manuel utilisateur

Nokia

Nokia HS-82 Manuel utilisateur

Nokia

Nokia BH-106 Black Manuel utilisateur

Nokia

Nokia BH-804 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH 604 - Headset - Binaural Manuel utilisateur

Nokia

Nokia HS-69 - Headset - Ear-bud Guide de démarrage rapide

Nokia

Nokia BH 301 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-503 Manuel utilisateur

Nokia

Nokia BH-905I Manuel utilisateur

Nokia

Nokia BH-700 Manuel utilisateur

Nokia

Nokia HS 11W Manuel utilisateur

Nokia

Nokia HS 11W Manuel utilisateur

Nokia

Nokia BH 300 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-214 Manuel de service

Nokia

Nokia BH-804 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-106 Black Manuel utilisateur

Nokia

Nokia Hs-45 - And Ad-57 Xpressmusic Stereo Headset 5310 3.5mm... Manuel utilisateur

Nokia

Nokia BH-217 Manuel utilisateur

Nokia

Nokia BH-303 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH 213 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-214 Manuel utilisateur

Nokia

Nokia Essence BH-610 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur