Nokia 02719B5 Manuel utilisateur

Nokia Bluetooth Headset BH-216

9215317/1.0

9215317/2.0

11 12

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this BH-216 product is in compliance

with the essential requirements and other

relevant provisions of Directive 1999/5/

EC. A copy of the Declaration of

Conformity can be found at

http://www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein

may be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in

this document in any form without the

prior written permission of Nokia is

prohibited.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Nokia operates a policy of ongoing

development. Nokia reserves the right to

make changes and improvements to any

of the products described in this

document without prior notice.

To the maximum extent permitted by

applicable law, under no circumstances

shall Nokia or any of its licensors be

responsible for any loss of data or income

or any special, incidental, consequential

or indirect damages howsoever caused.

The contents of this document are

provided "as is". Except as required by

applicable law, no warranties of any kind,

either express or implied, including, but

not limited to, the implied warranties of

merchantability and fitness for a

particular purpose, are made in relation to

the accuracy, reliability or contents of this

document. Nokia reserves the right to

revise this document or withdraw it at any

time without prior notice.

The availability of particular products may

vary by region. Please check with your

Nokia dealer for details.

Export controls

This device may contain commodities,

technology or software subject to export

laws and regulations from the US and

other countries. Diversion contrary to law

is prohibited.

Introduction

With the Nokia Bluetooth Headset

BH-216, you can make and answer

calls hands-free with your

compatible mobile device.

Read this user guide carefully before

using the headset. Also, read the

user guide for the device that you

connect to the headset.

This product may contain small

parts. Keep them out of the reach of

small children. The surface of this

device is nickel-free.

Bluetooth wireless technology

allows you to connect compatible

devices without cables. The headset

and the other device do not need to

be in line of sight, but they should

be within 10 metres (33 feet) of

each other. Connections may be

subject to interference from

obstructions, such as walls, or other

electronic devices.

The headset is compliant with the

Bluetooth Specification 2.1 + EDR

supporting the following profiles:

Headset Profile 1.1 and Hands-Free

Profile (HFP) 1.5. Check with the

manufacturers of other devices to

determine their compatibility with

this device.

Get started

The headset contains the following

parts shown on the title page:

power key (1), volume key (2),

answer/end key (3), earpiece (4),

indicator light (5), charger

connector (6), earloop (7), and

microphone (8).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic.

Metallic materials may be attracted to

the device. Do not place credit cards or

other magnetic storage media near the

device, because information stored on

them may be erased.

Charge the battery

Before charging the battery,

carefully read “Battery and charger

information”.

Warning: Use only

chargers approved by

Nokia for use with this

particular model. The use of

any other types may

invalidate any approval or

warranty, and may be

dangerous.

When you disconnect the power cord

of any accessory, grasp and pull the

plug, not the cord.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to the

charger connector. The red

indicator light is displayed

during charging. Charging the

battery fully may take up to

1 hour and 15 minutes.

3. When the battery is fully

charged, the green indicator

light is displayed. Disconnect the

charger from the headset, then

from the wall outlet.

The fully charged battery has power

for up to 6 hours of talk time or up

to 160 hours of standby time.

To check the battery charge when

the headset is not connected to a

charger, press the power key when

the headset is switched on. If the

indicator light is green, the charge

level is sufficient. If the light is

orange, you may need to recharge

the battery soon. If the light is red,

recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the

power key for about 5 seconds. The

headset beeps, and the green

indicator light is displayed. The

headset tries to connect to the last

connected device.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the

headset is not connected to a device

within about 30 minutes, it

switches off automatically.

Pair and connect the headset

1. Ensure that your mobile device

is switched on and the headset is

off.

2. Press and hold the power key (for

about 8 seconds) until the green

indicator light starts to flash

quickly.

3. Within about 3 minutes, activate

Bluetooth connectivity on the

mobile device, and set it to

search for Bluetooth devices.

4. Select the headset from the list

of found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device. In some

devices, you may need to make

the connection separately after

pairing.

When the headset is connected to

your device and is ready for use, the

green indicator light flashes slowly.

You can pair the headset with up to

eight devices, but you can connect

it to only one device at a time.

To manually connect the headset to

the last used device, switch the

headset off and on, or press and

hold the answer/end key for about 2

seconds.

You may be able to set your device

so that the headset connects to it

automatically. To activate this

feature in a Nokia device, change

the paired device settings in the

Bluetooth menu.

Basic use

Change the earpad

The headset may be provided with

different sized earpads. Select the

earpad that fits the best and is the

most comfortable for your ear.

To change the earpad, pull the

current earpad from the earpiece,

and push the new earpad into place,

with the narrower end first (12).

Place the headset on the ear

Gently push the earpiece against

your ear.

You can rotate the earpad to keep

the headset securely in the ear (13).

For example, if you use the headset

on the right ear, you may need to

rotate the earpad to the right for

the best fit. If you wear an earring,

ensure that it is not accidentally

attached to the earpad.

To use the headset with the earloop,

attach the earloop to it (11). To

detach the earloop, gently pull it

from the headset. Slide the earloop

behind your ear (9), and point the

headset towards your mouth (10).

Push or pull the earloop to set its

length.

Calls

To make a call, use your mobile

device in the normal way when the

headset is connected to it.

To redial the number you last called

(if your device supports this feature

with the headset), when no call is in

progress, press the answer/end key

twice.

To activate voice dialling (if your

device supports this feature with

the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds.

Proceed as described in the user

guide of your device.

To answer or end a call, press the

answer/end key. To reject a call,

press this key twice.

To adjust the volume, press the

volume key up or down.

To mute or unmute the microphone,

press the middle of the volume key.

When the microphone is muted, the

green indicator light flashes twice

about every 5 seconds.

To switch a call from the headset to

a compatible device, press and hold

the answer/end key for about 2

seconds, or switch off the headset.

To switch the call back to the

headset, press and hold the answer/

end key for about 2 seconds, or

switch on the headset.

Turn lights on or off

By default, the indicator lights are

on in all situations. To turn the

lights off in some situations (for

example, during a call or when the

headset is connected to a mobile

device) or back on, press and hold

the power key and the answer/end

key for about 2 seconds when the

headset is connected to a device.

Turning the lights off increases the

standby time.

Clear settings or reset

To delete the pairings from the

headset when it is switched off,

press and hold the power key and

the answer/end key (for about 6

seconds) until the red and green

indicator lights start to alternate.

To reset the headset if it stops

functioning, even though it is

charged, connect the headset to a

charger while you press and hold

the power key. The reset does not

clear the pairing settings.

Troubleshooting

If you cannot connect the headset

to your compatible device, check

that the headset is charged,

switched on, and paired with your

device.

Battery and charger information

This device has an internal,

nonremovable, rechargeable battery.

Do not attempt to remove the battery

from the device as you may damage

the device. This device is intended for

use when supplied with power from

the following chargers: AC-3, AC-4,

AC-5, AC-8, and DC-4. The exact

charger model number may vary

depending on the type of plug. The

plug variant is identified by one of the

following: E, EB, X, AR, U, A, C, or UB.

The battery can be charged and

discharged hundreds of times, but it

will eventually wear out. Recharge

your battery only with Nokia approved

chargers designated for this device.

Use of an unapproved charger may

present a risk of fire, explosion,

leakage, or other hazard.

If a battery is being used for the first

time or if the battery has not been used

for a prolonged period, it may be

necessary to connect the charger, then

disconnect and reconnect it to begin

charging the battery. If the battery is

completely discharged, it may take

several minutes before the charging

indicator light is displayed.

Unplug the charger from the electrical

plug and the device when not in use.

Do not leave a fully charged battery

connected to a charger, since

overcharging may shorten its lifetime.

If left unused, a fully charged battery

will lose its charge over time.

Always try to keep the battery between

15°C and 25°C (59°F and 77°F).

Extreme temperatures reduce the

capacity and lifetime of the battery. A

device with a hot or cold battery may

not work temporarily. Battery

performance is particularly limited in

temperatures well below freezing.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nokia casque

Nokia

Nokia BH-219 Manuel utilisateur

Nokia

Nokia BH-601 Manuel utilisateur

Nokia

Nokia HS HS 4W Manuel utilisateur

Nokia

Nokia Comm Band Pro Manuel utilisateur

Nokia

Nokia BH-905 Manuel utilisateur

Nokia

Nokia BH-203 Manuel utilisateur

Nokia

Nokia BH-609 Manuel utilisateur

Nokia

Nokia HS 36W Manuel utilisateur

Nokia

Nokia BH-905I Manuel utilisateur

Nokia

Nokia 02705Q5 Manuel utilisateur

Nokia

Nokia BH-121 Manuel utilisateur

Nokia

Nokia BH-217 Manuel utilisateur

Nokia

Nokia HS 26W - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia DAB Manuel utilisateur

Nokia

Nokia BH-209 Manuel utilisateur

Nokia

Nokia N-GAGE Manuel utilisateur

Nokia

Nokia HS 11W Manuel utilisateur

Nokia

Nokia BH-800 Manuel utilisateur

Nokia

Nokia BH 103 - Headset - In-ear ear-bud Manuel utilisateur

Nokia

Nokia BH-940 Manuel utilisateur

Nokia

Nokia BH-302 Manuel utilisateur

Nokia

Nokia BH-904 Manuel utilisateur

Nokia

Nokia WH-208 Manuel du propriétaire

Nokia

Nokia HS-37W Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur