Noctua NM-TR5-SP6 Manuel utilisateur

Scan this code to display

multilingual manuals on

your phone.

NOCTUA NM-TR5-SP6

INSTALLATION MANUAL

This manual will guide you through the installation process

of the SecuFirm2™ mounting system step by step.

Prior to installing the cooler,please consult thecompatibility

centre on our website (ncc.noctua.at) and verify that the

cooler is fully compatible with your motherboard.

Please also make sure that your PC case offers sufficient

clearance for the cooler and that there are no compatibility

issues with any other components (e.g. tall RAM modules).

Double check that the heatsink and fan clips do not make

contact with the VGA card, other PCIe cards, motherboard

heatsinks or any other components.

Noctua cannot be held responsible for any damage or

losses caused by compatibility issues.

Should you encounter any difficulties, please check the

FAQs on our website (faqs.noctua.at) and don’t hesitate

to contact our support team at support@noctua.at.

Dear customer,

Thank you very much for choosing a Noctua cooler

for your TR5/SP6 system. This manual will guide you

through the installation process step by step using an

NH-U14S DX-3647 heatsink as an example. Please note

that the installation procedure is identical for all models.

Enjoy your Noctua cooler on NM-TR5/SP6!

Yours sincerely,

Roland Mossig, Noctua CEO

Offsetting the cooler

The SecuFirm2™ mounting for TR5/SP6 makes it possible

to offset the cooler by 3 or 6mm. On motherboards with

east-to-west socket orientation, this can be used to offset

the compatible NH-U14S, NH-U12S and NH-U9 series

coolers towards the right, increasing clearance towards the

I/O panel. On boards that use a north-to-south orientation

of the CPU socket(s), this allows offsetting the cooler

towards the upper edge of the motherboard in order to

increase PCIe clearance.

Required mounting parts:

NM-AFB11 fastening brackets NM-SMT4 mounting tool

Caution: Gently tighten the screws until they stop, but do

not use excessive force (max. torque 0.6 Nm).

In order to offset the cooler, please unscrew the NM-AFB11

fastening brackets and reinstall them in the +3 (3mm

offset) or +6 (6mm offset) position.

Caution: Gently tighten the screws until they stop, but don’t

use excessive force (max. torque 0.6 Nm).

+ 0mm offset

+ 3mm offset

+ 6mm offset

Installing/replacing the mounting brackets

Take the fan(s) off the cooler. If the original mounting

brackets are already installed on the cooler, please take

them off first. Then install the NM-AFB11 brackets for

TR5/SP6.

Ensure that the name of the mounting bars is oriented

towards the CPU, as shown in the image above.

Scan this code to display

multilingual manuals on

your phone.

NOCTUA NM-TR5-SP6

INSTALLATION MANUAL

Transporting your system

Fastening the heatsink to the CPU

If you are using a new heatsink, first remove the plastic

protection cover from the base of the heatsink.

If your heatsink has thermal compound pre-applied, be

careful not to damage the layer of paste.

If you are not using the heatsink for the first time or it

doesn’t have thermal compound pre-applied, you need to

apply a thin layer of thermal compound to the CPU yourself

as shown below.

If there are residual traces of previous thermal paste or

thermal pads on your CPU or on the heatsink, please clean

them off first.

Caution: Gently tighten the screws until they stop, but don’t

use excessive force (max. torque 0.6 Nm).

Note that you can tilt the mounting tool for reaching the

screws in case they are blocked by the heatsink fins.

Transporting your system

As it is not possible to reliably calculate or control the forces

that act upon a system during transport (e.g. in shipping),

we generally recommend, for safety reasons, taking the

cooler off.

Noctua cannot be held responsible for any damage that

may arise due to excessive stress during transport if you

keep the heatsink installed.

Warranty, support and FAQs!

Even with high-grade products and strict quality control,

the possibility of defects cannot be eliminated entirely.

Therefore, we aim at providing the highest possible level

of reliability and convenience by offering a warranty

period of 6 years and direct, fast and straightforward

RMA service.

Should you encounter any problems with your NM-TR5-

SP6, please don’t hesitate to contact our support team at

[email protected].

Please also consult the FAQ section on our website:

faqs.noctua.at

Installing the fans

Connect the fan(s) to the motherboard’s CPU fan header(s).

If necessary, use the supplied NA-YC1 splitter cable to

connect both fans to one fan header.

Reattach the fans to the heatsink using the supplied fan

clips:

Autres manuels Noctua Matériel informatique

Noctua

Noctua NF-A6x25 5V PWM Manuel utilisateur

Noctua

Noctua REDUX NH-U12S Manuel utilisateur

Noctua

Noctua NF-F12 5V PWM Manuel utilisateur

Noctua

Noctua NH-D9L Manuel utilisateur

Noctua

Noctua NH-L9 65 Series Manuel utilisateur

Noctua

Noctua NH-U9B SE2 Manuel utilisateur

Noctua

Noctua NF-A20 5V Manuel utilisateur

Noctua

Noctua NH-L9x65 SE-AM4 Manuel utilisateur

Noctua

Noctua NH-D9 TR5-SP6 4U Manuel utilisateur

Noctua

Noctua NM-i17-MP83 Series Manuel utilisateur

Noctua

Noctua NH-U14S TR4-SP3 Manuel utilisateur

Noctua

Noctua NH-U14S DX-4677 Manuel utilisateur

Noctua

Noctua NH-D9 DX-3647 4U Manuel utilisateur

Noctua

Noctua NH-D15 Manuel utilisateur

Noctua

Noctua NH-L12 Ghost S1 Edition Mode d’emploi

Noctua

Noctua NM-i4677 Manuel utilisateur

Noctua

Noctua DX Series Manuel utilisateur

Noctua

Noctua NH-U12S SE-AM4 Manuel utilisateur

Noctua

Noctua DX Series Manuel utilisateur

Noctua

Noctua NM-A90 Manuel utilisateur

Noctua

Noctua NA-IS1-14 Sx2 Manuel utilisateur

Noctua

Noctua NA-IS1-12 Sx2 Manuel utilisateur

Noctua

Noctua NH-U12P-LGA775 Manuel utilisateur

Noctua

Noctua NH-L12S Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur