Nikon D300 Manuel utilisateur
Upgrading the Firmware for the D300
Upgrading the Firmware for the
D300
Windows
Thank you for choosing a Nikon product. This guide describes how to
upgrade the camera firmware for the D300.
If you are not confident that you can perform the update
successfully, the update can be performed by a Nikon-authorized
service representative.
The D300 has two sets of firmware, A and B, which must be updated separately. After
updating the A firmware, repeat steps 4–5, below, to upgrade the B firmware.
Important
The camera may be damaged if power is interrupted or camera controls are operated during the
update. Do not turn the camera off, remove or disconnect the power source, or operate camera
controls during the update. If the update is not completed successfully and the camera becomes
inoperable, take the camera to a Nikon-authorized service representative for inspection.
Get ready
To upgrade the camera firmware, you will need:
The camera
A UC-E4 USB cable or a memory card reader
One of the following power sources:
An EH-5/EH-5a AC adapter
A fully-charged EN-EL3e rechargeable Li-ion battery
A Nikon-approved memory card that has been formatted in the camera (note that
all data on the memory card will be deleted when the card is formatted; before
formatting the card, back up any data you wish to keep to a computer or other
device).
file:///K|/En/En/d300ab_win_en_ABF.html (1 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
The camera
User's Manual
Check the current camera firmware version
1
Turn the camera on.
2
Press the MENU
button and select
Firmware version
in the setup menu.
3
Two firmware versions (A and B) will be
displayed. Both should be earlier than 1.03.
4
Press OK and turn the camera off.
Download and extract the new firmware
1
Right-click an empty area of the desktop and select New > Folder from the menu
that appears. Name the folder as desired.
file:///K|/En/En/d300ab_win_en_ABF.html (2 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
2
Right-click the I agree - Begin download link on the download site and select
Save Target As. Save the file to the folder created in Step 3-1.
3
Open the folder created in Step 3-1 and
double-click F-D300-V110W.exe.
The following files will be extracted to a “D300Update”folder in the new folder:
A3000110.bin Camera A firmware
B3000110.bin Camera B firmware
“D300Update”folder
file:///K|/En/En/d300ab_win_en_ABF.html (3 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
Copy the firmware to the memory card
The firmware can be copied to the camera memory card either by connecting the
computer directly to the camera using the USB cable, or by removing the memory card
from the camera and inserting it in a card reader.
Important
Only one of the two sets of firmware (A or B) can be updated at a time. Use separate
memory cards for each set of firmware, or update firmware A as described below, then
format the memory card and repeat the process for firmware B.
Direct USB Connection
Note: Use the EH-5/EH-5a AC adapter or a fully-charged EN-EL3e rechargeable Li-ion
battery.
1
Turn the camera off and insert a formatted memory card. For information on
formatting memory cards, see the camera
User's
Manual
.
2
After turning the camera on, press the MENU
button, select the setup menu, and set the
USB option to Mass Storage.
3
Turn the camera off and connect the USB cable as shown below.
file:///K|/En/En/d300ab_win_en_ABF.html (4 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
UC-E4 USB cable
4
Turn the camera on.
If Nikon Transfer is installed, it will start automatically; to exit, select Exit from
the File menu.
Windows Vista
Under Windows Vista, an AutoPlay dialog
may be displayed. Click .
Windows XP
Under Windows XP, a Removable Disk
dialog may be displayed. Click Cancel.
file:///K|/En/En/d300ab_win_en_ABF.html (5 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
5
The camera will appear in “Computer”(Windows Vista) or “My
Computer”(Windows XP) as a removable disk. Copy “A3000110.bin”(A
firmware) or “B3000110.bin”(B firmware) from the “D300Update”folder to this
removable disk.
Drive letters may differ Illustration shows A firmware
When copying is complete, double-click the removable disk and confirm that
the file has been copied successfully.
6
Disconnect the camera from the computer.
For more information, see the camera
User's
Manual
.
Important
Be sure to copy the firmware to the root directory of the memory card. The camera will
not recognize the new firmware if it is placed in a folder under the root directory.
Card Reader
1
Connect the card reader to the computer and insert a formatted memory card.
If Nikon Transfer is installed, it will start automatically; to exit, select Exit from
the File menu.
file:///K|/En/En/d300ab_win_en_ABF.html (6 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
Windows Vista
Under Windows Vista, an AutoPlay dialog
may be displayed. Click .
Windows XP
Under Windows XP, a Removable Disk
dialog may be displayed. Click Cancel.
2
The memory card will appear in “Computer”(Windows Vista) or “My
Computer”(Windows XP) as a removable disk. Copy the firmware to the
removable disk as described in Step5 of “Direct USB Connection.”
3
Right click the removable disk and select Eject from the menu that appears.
Remove the memory card from the card reader.
Important
Be sure to copy the firmware to the root directory of the memory card. The camera will
not recognize the new firmware if it is placed in a folder under the root directory.
Update the camera firmware
file:///K|/En/En/d300ab_win_en_ABF.html (7 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
During the update, do not:
Remove the memory card
Turn the camera off
Operate any of the camera controls
Attach or remove lenses
Unplug or disconnect the AC adapter
Remove the battery
Subject the camera to powerful electromagnetic noise
Any of the above actions could cause the camera to become inoperable.
1
Insert the memory card containing the firmware into the camera.
2
Turn the camera on.
3
Press the MENU
button and select
Firmware version
in the setup menu.
4
The current firmware version will be
displayed. Highlight Update and press the
multi selector to the right.
5
A firmware update dialog will be displayed. Highlight Yes and press OK to
begin the update.
file:///K|/En/En/d300ab_win_en_ABF.html (8 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
*Illustration shows
dialog displayed
when A firmware
is updated. Follow
the same steps to
update B firmware.
6
The update may take anywhere from two to
five minutes. Do not perform any operations
while the messages shown at right are
displayed.
The message shown at right will be displayed
when the update is complete.
7
Confirm that the update was completed successfully.
7-1.Turn the camera off and remove the memory card.
7-2.Check the camera firmware version as described in Step2, “Check the
current camera firmware version.”
7-3.If the version displayed is 1.10, the
update was successful.
*Illustration shows dialog displayed when
updates for both A firmware and B
firmware are completed.
file:///K|/En/En/d300ab_win_en_ABF.html (9 of 10) [6/18/2010 3:43:17 PM]
Upgrading the Firmware for the D300
8
Format the memory card.
9
If you changed the USB setting from MTP/PTP to Mass Storage to update
the camera firmware, return to the USB menu and select MTP/PTP.
This completes the firmware update.
file:///K|/En/En/d300ab_win_en_ABF.html (10 of 10) [6/18/2010 3:43:17 PM]
Autres manuels pour D300
15
Table des matières
Autres manuels Nikon Appareil photo numérique
Nikon
Nikon 1 AW1 Manuel utilisateur
Nikon
Nikon 1 V1 Manuel utilisateur
Nikon
Nikon COOLPIX 8800 Manuel utilisateur
Nikon
Nikon D300 Manuel utilisateur
Nikon
Nikon CoolPix 4100 Manuel utilisateur
Nikon
Nikon Coolpix L10 Manuel utilisateur
Nikon
Nikon Coolpix S230 Manuel utilisateur
Nikon
Nikon D800E Manuel utilisateur
Nikon
Nikon CoolPix P7100 Manuel utilisateur
Nikon
Nikon D3100 Manuel utilisateur
Nikon
Nikon D3300 Manuel utilisateur
Nikon
Nikon COOLPIX S9400 Manuel utilisateur
Nikon
Nikon CoolPix S2 Manuel utilisateur
Nikon
Nikon COOLPIX S31 Manuel utilisateur
Nikon
Nikon COOLPIX L28 Manuel utilisateur
Nikon
Nikon COOLPIX AW1100 Manuel utilisateur
Nikon
Nikon Coolpix 5000 Manuel utilisateur
Nikon
Nikon COOLPIX S3200 Manuel utilisateur
Nikon
Nikon COOLPIX S6500 Manuel utilisateur
Nikon
Nikon D100 Instructions d'installation et d'utilisation
