Nexans N-COMFORT DT+ Manuel utilisateur

THERMOSTAT

N-COMFORT DT+

USER MANUAL

EN BLUETOOTH THERMOSTAT ......................................7

FI BLUETOOTH-TERMOSTAATTI ....................................16

NO BLUETOOTH-TERMOSTAT ......................................25

SE BLUETOOTH-TERMOSTAT ........................................34

USER INTERFACE

EN BLUETOOTH THERMOSTAT ......................................7

FI BLUETOOTH-TERMOSTAATTI ....................................16

NO BLUETOOTH-TERMOSTAT ......................................25

SE BLUETOOTH-TERMOSTAT ........................................34

INSTALLATION

WIRING INSTRUCTIONS

MODE AND STATUS INDICATION

comfort mode eco mode

Installation and operating instructions

BLUETOOTH THERMOSTAT – SETUP

TECHNICAL SPECIFICATIONS

Bluetooth: Version 4.2

Power supply: 230V - 50Hz

Maximum load: 16A (resistive)

Temperature range: +5°C/+35°C

External Temperature setback: 230V - 50Hz

IP class: IP20

Standard Color: Grey

Sensors: External oor sensor NTC or wireless sensor

INSTALLATION

Installation must be done by a qualied electrician in accordance with

wiring and building regulations. Before installation, disconnect any power

to the thermostat’s mains.

Snap N-Comfort DT+ Din thermostat onto a standard DIN rail the up-side rst.

Connect the wires to the thermostat’s terminals according to the wiring

diagram on a cover.

1: External 230V setback (if in use), 2: Heater neutral, 3: Main supply

neutral, 4: Main supply line, 5: Heater line, 6-7: NTC oor probe.

STARTUP

After connecting the power to the thermostat for the rst time the parame-

ters are initialized to default values.

Name of thermostat: RANDOM number

Mode: Floor

Floor temperature min: 5°C

Floor temperature max: 35°C

Floor temperature offset (calibration): 0°C

Air temperature min: 5°C

Air temperature max: 28°C

Air temperature offset (calibration): 0°C

Snow melting ON temperature min: 0°C

Snow melting ON temperature max: 10°C

Snow melting OFF temperature: -25°C

Snow melting air humidity min: 30%

User program activated eco temp: 19°C

Externally activated eco temp: 19°C

Use N-Comfort app: OFF

Sensor type: 10k ohm

Led brightness: 100%

Weekly program: OFF

Use N-Comfort app to check and modify settings.

N-COMFORT DT+ THERMOSTAT – user manual

BASIC USE

The thermostat is controlled with a rotary knob and an optional setback

switch. The basic use of the thermostat is simple:

• Turn off the device by rotating the knob to OFF position

• Turn ON and adjust the desired temperature with the knob, mid

position corresponding to 25°C

• Use external 230VAC setback switch to activate the eco

temperature (19°C by default)

Led indication lights show the status:

• Red ON →comfort temp reached

• Red breathing →heating ON

• Green ON →eco temp reached

• Green breathing →heating ON

• Both leds blinking →error

• At power up red led is 4 seconds ON to indicate oor heating

mode and in all other modes green led is ON for 4 seconds

Additionally with N-Comfort app (see next chapter):

• Red blinking →bluetooth connection

• Green blinking →conrm to save changes by shortly turning

the knob to OFF state

ADVANCED USE

You can access all the thermostat data with a free of charge N-Comfort app

running in Android and iOS mobile devices. With the app you read logged

temperatures, modify settings and dene a weekly user program. App can

also generate email reports. Follow the guides in N-Comfort app. Ther-

mostat indicates the mobile device connection with fast blinking red led.

1 Settings

Thermostat has several settings which can easily be adjusted with N-Com-

fort app. Note! Remember to save changes before leaving the setting page.

Name of thermostat

A free and descriptive name shown in N-Comfort app.

Table des matières

Langues :

Autres manuels Nexans Thermostat

Nexans

Nexans N-Comfort CEF-001 Manuel utilisateur

Nexans

Nexans N-Comfort CDFR-001 Manuel utilisateur

Nexans

Nexans MILLITEMP CDFR-003 Manuel

Nexans

Nexans N-HEAT Series Manuel

Nexans

Nexans N-COMFORT KT+ Manuel utilisateur

Nexans

Nexans N-COMFORT TD+ Manuel utilisateur

Nexans

Nexans N-COMFORT TR+ Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur