Newskill ANUKI Manuel utilisateur
ANUKI
QUICK GUIDE
WIRELESS ANC EARBUDS
WIRELESS ANC EARBUDS
ANUKI
Touch part
Type-C port
Chargin indicator light
Vent
Indicator light
Power on: light touch 5 seconds
Power off: light touch 5 seconds
Next song: Double touch the right earphone
Previous song: Double touch the left earphone
Volume up: Triple touch the right earphone
Volume down: Triple touch the left earphone
Answer the call: Light touch any side
Reject the call: Light touch 2 second any side
It may cause hearing damage under longtime using,
please arrange the use time reasonably.
operation function
Please do not take the earbuds apart and remodel. otherwise, it may cause elec-
trical breakdown by the fire or even completely damage the product.
Please do not put the product under too high or too low temperature (Below 0°C
or above 45°C).
Please avoid using the device indicator light near the eyes of children or animals.
Please do not use the device under thunderstorms. It may cause the device to
malfunction and increase the risk of electric shock.
Please do not wipe the product with oil or other volatile liquids.
Please do not let the device get wet with liquids.
1.
2.
3.
4.
5.
6.
Warning
NOTE
WIRELESS ANC EARBUDS
ANUKI
When the earphone keeps flashing green light, it means battery
low and will power off soon. Please put the earphones into the
charge case, it automatically turn off and charging.
Earphone charging
When the charge case keeps flashing green light, it means bat-
tery low. Please use the qualified charging cable provided by the
manufacturer to charge. The red indicator light is always on
during charging; After fully charged, the green indicator light is
on for 10s then automatically goes out.
Charge case charging
After the earphones have connected with the
phone, there is a battery mark next to the blue-
tooth or earphone symbol to display the battery
level.
Where to see the power display?
Charging
Method one
Method two
Dual earphone mode
After fully charged, take one earphone and touch about 5 seconds,
the red and green lights flash, turn on Bluetooth on the phone, search
for the pairing name “XG-5.0” and click to connect.
Single earphone mode
After fully charged, opening the cover, not need remove the ear-
phones will turn on automatically, waiting about 5 seconds, the
red and green lights flash, turn on Bluetooth on the phone,
search for the pairing name ”ANUKI” and click to connect.
After fully charged, take the two earphones and touch about 5
seconds, the red and green lights flash, turn on Bluetooth on the
phone, search for the pairing name “ANUKI” and click to connect.
WIRELESS ANC EARBUDS
ANUKI
Transparent mode Iphone support manual
setting ANC mode
How to set three
modes by Iphone?
Noise reduction mode
Turn off noise reduction / transparency mode
When the headset is turned on or playing music, long press
left and right about 2s on either side of the earphone, you hear
a beep at the same time. Prompt tone to enter transparent
mode, Prompt tone: transparency
In the transparent mode, long press either side of the left and
right earphones about 2s, you hear a beep sound at the
same time, Prompt tone: ANC on
In the noise reduction mode, long press either side of the left or
right for 2s, when you hear a beep, Prompt tone: ANC off
How to turn on
noise reduction / transparency mode
Name
Left
Right
Ear Tip Fit Test
PRESS AND HOLD AIRPODS
ANUKI
Noise Control
Noise Control
NOISE CONTROL
Noise
Cancellation
O Transparency
ANUKIBluetoothSettings Bluetooth
Bluetooth
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your
iPhone, go to the Apple Watch app.
Connected
ANUKI
Name
Left
Right
Ear Tip Fit Test
PRESS AND HOLD AIRPODS
ANUKI
Noise Control
Noise Control
NOISE CONTROL
Noise
Cancellation
O Transparency
ANUKIBluetooth
Noise Control
Siri
Noise Cancellation
Blocks out external sounds
Lets in exernal sounds
Turns o noise cancellation a...
Transparency
O
NOISE CONTROL
Press and hold the stem to cycle
between the selected noise control
modes.
LeftANUKI
WIRELESS ANC EARBUDS
ANUKI
Please notice the wearing method, do not cover the earphone by ear to prevent
interruption of signal.
Do not cover any earbuds on the dual earbuds mode by hand, or it will result the
interruption of signal.
Please use this earphone under its working range (10 meters) and for best results
avoid obstacles in between the connected devices.
On the dual earbuds model, sometimes the connected of “R” maybe interrupted,
please check the using condition or the working range.
1.
2.
3.
4.
Put the earphone into charging case to close. Take it out after
3-5s, it will automatically re-pair!
Reset Bluetooth earphone
About Signal
WIRELESS ANC EARBUDS
ANUKI
Table des matières
Autres manuels Newskill Casque audio
