Newport Spectra-Physics ST-200 Manuel utilisateur

Smart Table ST-200

User’s Manual

Preface iii

Warranty

Newport Corporation warrants that this product will be free from defects in

material and workmanship and will comply with Newport’s published

specifications at the time of sale for a period of one year from date of

shipment. If found to be defective during the warranty period, the product

will either be repaired or replaced at Newport's option.

To exercise this warranty, write or call your local Newport office or

representative, or contact Newport headquarters in Irvine, California. You

will be given prompt assistance and return instructions. Send the product,

freight prepaid, to the indicated service facility. Repairs will be made and the

instrument returned freight prepaid. Repaired products are warranted for the

remainder of the original warranty period or 90 days, whichever first occurs.

Limitation of Warranty

The above warranties do not apply to products which have been repaired or

modified without Newport’s written approval, or products subjected to

unusual physical, thermal or electrical stress, improper installation, misuse,

abuse, accident or negligence in use, storage, transportation or handling. This

warranty also does not apply to fuses, batteries, or damage from battery

leakage.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.

NEWPORT CORPORATION SHALL NOT BE LIABLE FOR ANY

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE PURCHASE OR USE OF ITS PRODUCTS.

First printing 2004

this manual may be reproduced or copied without the prior written approval

of Newport Corporation.

This manual has been provided for information only and product

specifications are subject to change without notice. Any change will be

reflected in future printings.

Newport Corporation

1791 Deere Avenue

Irvine, CA, 92606

USA

Part No. 41399-01, Rev. B

iv Preface

Confidentiality & Proprietary Rights

Reservation of Title:

The Newport programs and all materials furnished or produced in connection

with them ("Related Materials") contain trade secrets of Newport and are for

use only in the manner expressly permitted. Newport claims and reserves all

rights and benefits afforded under law in the Programs provided by Newport

Corporation.

Newport shall retain full ownership of Intellectual Property Rights in and to

all development, process, align or assembly technologies developed and other

derivative work that may be developed by Newport. Customer shall not

challenge, or cause any third party to challenge the rights of Newport.

Preservation of Secrecy and Confidentiality and Restrictions to Access:

Customer shall protect the Newport Programs and Related Materials as trade

secrets of Newport, and shall devote its best efforts to ensure that all its

personnel protect the Newport Programs as trade secrets of Newport

Corporation. Customer shall not at any time disclose Newport's trade secrets

to any other person, firm, organization, or employee that does not need

(consistent with Customer's right of use hereunder) to obtain access to the

Newport Programs and Related Materials. These restrictions shall not apply

to information (1) generally known to the public or obtainable from public

sources; (2) readily apparent from the keyboard operations, visual display, or

output reports of the Programs; 3) previously in the possession of Customer

or subsequently developed or acquired without reliance on the Newport

Programs; or (4) approved by Newport for release without restriction.

Service Information

This section contains information regarding factory service for the source.

The user should not attempt any maintenance or service of the system or

optional equipment beyond the procedures outlined in this manual. Any

problem that cannot be resolved should be referred to Newport Corporation.

Preface v

Technical Support Contacts

North America & Asia Europe

Newport Corporation Service Dept.

1791 Deere Ave. Irvine, CA 92606

Telephone: (949) 253-1694

Telephone: (800) 222-6440 x31694

Newport/MICRO-CONTROLE S.A.

Zone Industrielle

45340 Beaune la Rolande, FRANCE

Telephone: (33) 02 38 40 51 56

Newport Corporation Calling Procedure

If there are any defects in material or workmanship or a failure to meet

specifications, promptly notify Newport's Returns Department by calling 1-800-222-

6440 or by visiting our website at www.newport.com/returns within the warranty

period to obtain a Return Material Authorization Number (RMA#). Return the

product to Newport Corporation, freight prepaid, clearly marked with the RMA# and

we will either repair or replace it at our discretion. Newport is not responsible for

damage occurring in transit and is not obligated to accept products returned without

an RMA#.

E-mail: [email protected]

When calling Newport Corporation, please provide the customer care representative

with the following information:

• Your Contact Information

• Serial number or original order number

• Description of problem (i.e., hardware or software)

To help our Technical Support Representatives diagnose your problem, please note the

following conditions:

• Is the system used for manufacturing or research and development?

• What was the state of the system right before the problem?

• Have you seen this problem before? If so, how often?

• Can the system continue to operate with this problem? Or is the system non-

operational?

• Can you identify anything that was different before this problem occurred?

vi Preface

Table of Contents

EU Declaration of Conformity............................................................... ii

Warranty................................................................................................ iii

Technical Support Contacts ................................................................... v

Table of Contents .................................................................................. vi

List of Figures ...................................................................................... vii

List of Tables ...................................................................................... viii

1Safety Precautions 9

1.1 Definitions and Symbols .............................................................. 9

1.1.1 General Warning or Caution .............................................9

1.1.2 Electric Shock....................................................................9

1.1.3 CSA Mark with “C” and “US” Indicators.........................9

1.1.4 European Union CE Mark ...............................................10

1.1.5 Fuses ................................................................................10

1.1.6 Frame or Chassis .............................................................10

1.1.7 On ....................................................................................10

1.1.8 Off....................................................................................11

1.1.9 Protective Conductor Terminal .......................................11

1.1.10 USB Connector Symbol ..................................................11

1.1.11 Mounting precaution .......................................................11

1.2 Warnings and Cautions............................................................... 12

1.2.1 General Warnings............................................................12

1.2.2 General Cautions .............................................................13

1.3 Location of Warnings ................................................................. 13

1.3.1 Rear Panel........................................................................13

2General Information 15

2.1 Introduction ................................................................................ 15

2.2 Specifications ............................................................................. 16

3Getting Started 19

3.1 Unpacking and Handling............................................................ 19

3.2 Inspection for Damage ............................................................... 19

3.3 Parts List..................................................................................... 19

3.4 Choosing and Preparing a Suitable Work Surface ..................... 20

3.5 Electrical Requirements.............................................................. 20

3.6 Power Supplies ........................................................................... 20

3.7 Operating Temperature............................................................... 20

Preface vii

4System Operation 21

4.1 Front Panel.................................................................................. 21

4.1.1 AC Power Switch ............................................................21

4.1.2 Status ...............................................................................22

4.1.3 I/O....................................................................................22

4.1.4 Auto- Tune.......................................................................23

4.1.5 USB Interface ..................................................................23

4.2 Rear Panel................................................................................... 24

4.2.1 Damper Output connectors..............................................24

4.2.2 Frame or Chassis Terminal..............................................24

4.2.3 AC Power Inlet Socket ....................................................24

5Software Application 25

5.1 Overview .................................................................................... 25

5.1.1 About Tab........................................................................26

5.1.2 Status Tab ........................................................................27

5.1.3 Auto -Tune Tab ...............................................................28

5.1.4 Manual Tune Tab ............................................................30

5.1.5 Options Tab .....................................................................31

6Maintenance and Service 33

6.1 Enclosure Cleaning..................................................................... 33

6.2 Fuse Replacement....................................................................... 33

6.3 Obtaining Service ....................................................................... 34

6.4 Service Form .............................................................................. 35

List of Figures

Figure 1 General Warning or Caution Symbol............................................... 9

Figure 2 Electrical Shock Symbol.................................................................. 9

Figure 3 CSA mark with “C” and “US” Indicators........................................ 9

Figure 4 CE Mark......................................................................................... 10

Figure 5 Fuse Symbol................................................................................... 10

Figure 6 Frame or Chassis Terminal Symbol............................................... 10

Figure 7 On Symbol ..................................................................................... 10

Figure 8 Off Symbol..................................................................................... 11

Figure 9 Protective Conductor Terminal Symbol ........................................ 11

Figure 10 USB connector Symbol.................................................................. 11

Figure 11 Locations of warnings on the rear panel ........................................ 13

Figure 12 Typical Compliance Curve. ........................................................... 16

viii Preface

Figure 13 Effect of damping on table vibration levels ................................... 17

Figure 14 Front Panel Layout......................................................................... 21

Figure 15 BNC output sensitivity................................................................... 23

Figure 16 Rear Panel ...................................................................................... 24

Figure 17 Smart Table-Util Software Icon..................................................... 25

Figure 18 About Tab Screen........................................................................... 26

Figure 19 Status Tab Screen........................................................................... 27

Figure 20 Auto Tune Tab Screen showing dual-channel display................... 29

Figure 21 Auto Tune Tab Screen showing single-channel display................ 29

Figure 22 Manual Tune Tab Screen ............................................................... 30

Figure 23 Options Tab Screen........................................................................ 32

Figure 24 Fuse Replacement .......................................................................... 34

List of Tables

Table 1 Specifications ................................................................................. 16

Table 2 Smart Table Controller Specifications........................................... 18

Table 3 Envoronmental Specifications ....................................................... 18

Table 4 Definition of SYSTEM, CH1 and CH2 status LED’s. .................. 22

Table 5 Measurment Parameters................................................................. 22

1 Safety Precautions

1.1 Definitions and Symbols

The following terms and symbols are used in this documentation and also

appear on the Smart Table Controller where safety-related issues occur.

1.1.1 General Warning or Caution

Figure 1 General Warning or Caution Symbol

The Exclamation Symbol in the figure above appears in Warning and Caution

tables throughout this document. This symbol designates an area where

personal injury or damage to the equipment is possible.

1.1.2 Electric Shock

Figure 2 Electrical Shock Symbol

The Electrical Shock Symbol in the figure above appears throughout this

manual. This symbol indicates a hazard arising from dangerous voltage.

Any mishandling could result in irreparable damage to the equipment, and

personal injury or death.

1.1.3 CSA Mark with “C” and “US” Indicators

Figure 3 CSA mark with “C” and “US” Indicators

The presence of the CSA mark with “C” and “US” indicates that it has been

designed, tested and certified as complying with all applicable U.S. and

Canadian safety standards.

10 Safety Precautions

1.1.4 European Union CE Mark

Figure 4 CE Mark

The presence of the CE Mark on Newport Corporation equipment means that

it has been designed, tested and certified as complying with all applicable

European Union (CE) regulations and recommendations.

1.1.5 Fuses

Figure 5 Fuse Symbol

The fuse symbol in the figure above identifies the fuse location on the Smart

Table Controller.

1.1.6 Frame or Chassis

Figure 6 Frame or Chassis Terminal Symbol

The symbol in the figure above appears on the Smart Table Controller. This

symbol identifies the frame or chassis terminal.

1.1.7 On

Figure 7 On Symbol

The On Symbol in the figure above represents a power switch position on on

the Model ST-200 Smart Table controller. This symbol represents a Power

On condition.

Table des matières

Autres manuels Newport Contrôleurs

Newport

Newport NewStep NSA12 Manuel utilisateur

Newport

Newport SMC100CC Manuel utilisateur

Newport

Newport XPS-Q8 Manuel utilisateur

Newport

Newport Closed Loop Picomotor 8310CE Manuel utilisateur

Newport

Newport 6100 Manuel utilisateur

Newport

Newport i Series Manuel utilisateur

Newport

Newport ESP301 Manuel utilisateur

Newport

Newport XPS Manuel d'utilisation et d'entretien

Newport

Newport MM4006 Manuel utilisateur

Newport

Newport MM4006 Manuel utilisateur

Newport

Newport XPS Series Mode d’emploi

Newport

Newport CONEX-PP Series Manuel utilisateur

Newport

Newport MM4006 Manuel utilisateur

Newport

Newport 850G Series Manuel utilisateur

Newport

Newport XPS-Q8 Manuel utilisateur

Newport

Newport 6000 Manuel utilisateur

Newport

Newport New Focus 3502 Manuel utilisateur

Newport

Newport CONEX - AGAP Note de version

Newport

Newport FSM-CD300B Manuel utilisateur

Newport

Newport ESP300 Series Manuel utilisateur

Newport

Newport ESP6000 Manuel utilisateur

Newport

Newport New Focus Picomotor 8742 Manuel utilisateur

Newport

Newport XPS-D Manuel utilisateur

Newport

Newport MM4005 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur