Nevco MPCX SCD Series Caractéristiques techniques

Rev. 2/3/2012 135-0136

Scoreboard Operator’s Instructions

MPCX SCD / DGT / Pitch Time Control

Since 1934

Retain this manual in your permanent files

These Instructions are for the Following Models:

LED models:

Incandescent models:

SCD-5

S60-LED

SCD-7

SCD-7A

9520

9620

DGT-5

DGT-5A

DGT-6

SEG-14

SEG-18

S60

SCD-4

DGT-2

3020

Thank You

Thank You for choosing NEVCO. We appreciate your business.

The following instructions will help you become familiar with the operation and features of the scoreboard

system.

Please take a few minutes to study this manual, and to practice with the control.

If you ever have any questions or comments, please call or email us.

NEVCO GUARANTEE

To view or receive the most recent copy of the Guarantee, please visit our website, www.nevco.com

or call 1-618-664-0360

NEVCO, Inc.

301 East Harris Avenue

Greenville, IL 62246-2151 USA

USA TOLL-FREE 800-851-4040

CANADA TOLL-FREE 800-461-8550

International Telephone: +1-618-664-0360

Website: www.nevco.com

Email: info@nevco.com

Note: Some features may not be available

on some models.

May not be compatible with certain older scoreboards

MPCX Receiver

MPCX

CONTROL

(rear

view)

Belt Clip

Battery

ompartment

Cover (2 x AA)

IME

MPCX SCD / DGT/ PITCH TIME CONTROL

(front

view)

IME

OFF

HORN

CLEAR DISPLAY (blanks the SCD,

PTD, or DGT displays)

3 Programmable RESET keys

Add to or Subtract from

the

selected

feature / also used to select options

SET TIME

(SCD / DGT/ PTD Time and

program the 3 Reset keys)

LCD Display (16 characters x 2 lines)

Power ON / OFF Switch

OPTIONS key

Allows you to:

Set Brightness of Scoreboard

Check Battery Level

Check Signal Strength

Turn Security ON/OFF

Re- link Control

Select Scoreboard Type

BNC

Connector

(Signal out to scoreboard)

LED Status Indicator

(On steady = Power)

(Blinking = Signal I/O)

Power Input

(9 V DC)

Not Used

TABLE OF CONTENTS

QUICK START GUIDE .................................................................................................................1

TART A

AME

................................................................................................................1

TART THE

IMER

....................................................................................................................1

TOP THE

IMER

.......................................................................................................................1

KEYBOARD FUNCTIONS............................................................................................................2

GREETING

SCREEN

......................................................................................................................2

MAIN

SCREEN

...............................................................................................................................3

SET

TIME

SCREEN

........................................................................................................................4

OPTIONS

ENU

...........................................................................................................................5

Standard Options .....................................................................................................................5

Advanced Options ....................................................................................................................6

Procedure to mate a control and receiver(s) ........................................................................... 7

Setting Scoreboard Model........................................................................................................ 8

TROUBLESHOOTING CHART..................................................................................................9

QUICK START GUIDE

SHOT CLOCK, SEGMENT TIMER, DELAY OF GAME, and PITCH TIME models

Shot Clock (models SCD-5, SCD-7, and S60-LED).

Delay of Game (model DGT-5).

Pitch Time (model 900-9520)

Segment Timer (model SEG-14 and SEG-18)

Note: It is assumed here that the control has been configured for the correct scoreboard type and the control has been linked to the

desired receiver(s). Both functions are explained in the setup guide that comes with a new control. The control is set to “SCD” models

by default at the factory. Switch it to Delay of Game, Segment Timer, or Pitch Timer series if needed in the field from the OPTION

menu. It is assumed that the receiver is powered ON.

To Start a New Game

Press

The control will display a greeting while it establishes

communications with its receiver(s). (Up to 30 seconds).

Next the display will show the preset time for RESET 1

key, the time status, and the current preset times for

RESET 2 and RESET 3 keys.

Note: The cursor indicates the active function.

Press To set the timer to the value the key is set to.

You are now ready for the game to begin.

To Start the Timer

Press

The control will display

To Stop the Timer

Press

The control will display

Please consult the following sections of this manual for more details, functions, and features

ON/OFF

MPCX

SCD

DGT

»»»

RESET 1

Time:OFF

R2: 30 R3: 35

TIME

OFF

15 Time:OFF

R2: 30 R3: 35

15 Time:OFF

R2: 30 R3: 35

15 Time:ON

R2: 30 R3: 35

KEYBOARD FUNCTIONS

GREETING screen

When you are done using the control turn it OFF to conserve

batteries.

Note: Always power ON the receiver(s) (scoreboard(s)) first, and wait a few seconds for the receiver(s) to initialize

(red LED illuminates) before powering ON the control. If the control is already ON, turn it OFF, wait a few seconds,

and then turn it back ON.

Note: If the scoreboard fails to respond to the control, power the control OFF, wait a few seconds, and then try

again. Please allow time for each control to complete its powering ON process (main screen appears) before turning

ON another control.

MPCX

SCD

»»»

ON/OFF

GREETING

When the control is Powered ON, the greeting showing the

type of control and the sport is displayed. This greeting

continues to be displayed while the control establishes

communications with its receiver(s). (May take up to 30

seconds)

Accessed

pressing

MAIN screen

Press RESET 1, 2, or 3 at any time to immediately reset the

timer to its preset value.

Note: Time set to ON: If the current counting time has not expired and another time is selected using RESET (1-3),

the new time value will be loaded and will begin counting immediately with no further action needed.

Note: If the current loaded time has expired or the timer is stopped and RESET (1-3) is pressed, the new time value

will be loaded immediately, however it will not begin counting until the TIME ON key is pressed.

Turns the time ON.

Turns the time OFF.

Sounds the horn. (Approximately 2 seconds)

Note: Does not change the control display.

Note: Hold key down to extend duration.

Clears (Blanks) the timer displays.

Note: If, when the main screen appears, the timer displays remain dark and will not

respond to the control, then the receivers were not found. Power the control OFF, make

sure all associated receivers are powered ON, and try the control again. Please allow time

for each control to complete its powering ON process (main screen appears) before

turning ON another control.

15 Time:OFF

R2: 30 R3: 35

RESET 1

RESET 2

RESET 3

Accessed

pressing

MAIN

The main screen shows the reset time for the Reset 1 key, the

Timer Status, and the reset time for the Reset 2 and Reset 3

keys. Press any one of these Reset keys to immediately load its

value into the timer. The reset values for these three keys can be

changed by using the SET TIME screen.

Note: The control stores three times for SCD mode and three times for DGT mode.

A CLEAR DISPLAY key is available for blanking the timers

during the last few seconds of main time when they are no

longer needed.

You should keep this screen displayed during the game.

HORN

15 Time:OFF

R2: 30 R3: 35

TIME

OFF

TIME

OFF

TIME

15 Time:ON

R2: 30 R3: 35

15 Time:OFF

R2: 30 R3: 35

CLEAR

DISPLAY

Rst1:15 Time:OFF

Rst2:30 Rst3:35

SET TIME screen

Note: The SET TIME is active only if the time is stopped.

Pressing it with time running causes the control to prompt.

The first press of the SET TIME key brings up a screen for

setting the displayed time. Use the “+” or “-” keys to select

the time (0-199).

Note: Only the Pitch Timer is able to go up to 199. For Shot clock and Delay of Game Timer the timer

will only go up to 69. It is capable of counting down from 199 but the display will not display proper time

until 69 seconds are left.

Note: Hold the key down for fast advance.

Note: You can press one of the Reset keys first then adjust the displayed time up or down as needed with

the “+” and “-” keys.

Press again to set the RESET 1 time:

Use the “+” and “-” keys to enter the desired

preset time.

Note: Hold the key down for fast advance.

Press again to set the RESET 2 time:

Use the “+” and “-” keys to enter the

desired preset time.

Note: Hold the key down for fast advance.

Press again to set the RESET 3 time:

Use the “+” and “-” keys to enter the

desired preset time.

Note: Hold the key down for fast advance.

Note: Any of the three programmable Reset keys can be set to any umber of seconds from 0 to 199.

Note: Separate times are stored for Shot Clock, Segment Timer, Pitch Timer, and Delay Of Game modes. Refer to

options Menu

Note: To return to the main screen, press the TIME OFF key.

Note: Some timers will display tenths of seconds while others display only whole seconds. In all cases the time is

divided into fractions of a second for greater accuracy. It may be possible to start and stop the time and see no

change in the displayed time even though several fractions of a second may have been counted off. The fractions of

seconds are always cleared when a new time is set.

Set Time:

SCD/DGT Time: 0

SET

TIME

SET

TIME

Time Is Running

Stop Time To Set

Set Time:

Reset 2 Time: 30

Set Time:

Reset 1 Time:15

Set Time:

Reset 3 Time:35

SET

TIME

SET

TIME

Accessed

pressing

SET TIME

This screen is for setting a special miscellaneous time into the

timer. It also provides a way to program the desired times into

each of the three RESET keys. These keys can then be pressed at

any time to instantly load the timer with each keys reset value.

Note: Press the TIME OFF key at any time to return to the main

screen.

Set Time:

Time: 120

SET

TIME

OPTIONS Menu

Several option settings are available to fine tune the scoreboard system to your needs. These

settings are saved in the control. They are remembered even if the control is turned OFF or the

batteries removed. When a control turns ON the scoreboard, these settings are sent to the

scoreboard and are used to define how it operates. This allows each coach or group to have their

own control with its unique option choices, thus eliminating the need to set up the options every

time the scoreboard is used. For example, Brightness (Baseball – day time) (Soccer – night time).

It is also possible to use more than one control to operate the scoreboard. For instance, the Time

can be controlled by one person while someone else operates the rest of the scoreboard with

another control.

Standard Options

The options key can be used to access the following features. Each press of the options

key moves you to the next option screen. When all options screens have been accessed

you are returned to the main screen.

Note: In this illustration the cursor indicates the default factory settings.

Allows you to select the Brightness Level of the

scoreboard. (Bright or Dim)

Allows you to change the direction time counts

Some scoreboards (timers) that this MPCX is compatible

with have a horn. It can be used to sound at the end of

time. This enables or disables that function

Reports the condition of the batteries in the control.

Allows you to check signal strength when connected to a

receiver.

Used as an indication of reliability of communications.

Affected by distance, battery condition, obstructions and signal

interference.

OPTIONS

Battery Level

L >>>>>> H

Signal

Strength

Press(+)

Signal

Strength

Sign

Strength

L >>>>>>>>> H

Set Brightness

(+)Bright (-)Dim

Time Direction

(+)Up (-)Down

Auto Horn

(+)On (-)Off

Advanced Options

This menu option allows you to access settings that affect how

the control operates. Generally, these settings need not be

changed and should only be changed by an experienced operator

or under direction from the Nevco Service Department.

Press the following key sequence:

to gain access to the following additional menu items.

Press the OPTIONS key to return to the main screen.

The Security setting is used to allow multiple controls to

simultaneously operate the scoreboard.

With the Security set to (+)ON, the scoreboard will ignore all

other controls and can be operated only by the control that turned

it ON. When this control is turned OFF another control can be

used to turn the scoreboard ON. Should the batteries go dead or

the 1

control leave the area – Power must be cycled to the

scoreboard to allow another control to operate the scoreboard.

If the Security is set to (-)OFF, multiple controls can be used to

operate the same scoreboard or scoreboard system. This allows

one person to operate part of the scoreboard, such as the clock,

while someone else operates the rest of the scoreboard with

another control. Allow each control to establish communications

with its receiver(s) (Greeting screen disappears) before powering

ON the next control.

Note: Set the Security of ALL controls used in a multi-control system to

(-)OFF.

Note: All controls need to be configured for the appropriate scoreboard model

group and linked to the same receiver(s).

Note: The control display will only update when keys are pressed.

Note: Make sure all controls of a multi-control scoreboard system are

powered OFF before starting the system. Power ON the system receivers,

then, power ON the control that will determine the scoreboard attributes

(Brightness Level etc.). Next; power ON the remaining controls. Please allow

time for each control to complete its powering ON process (main screen

appears) before turning ON another control.

Enter Code to

Change Settings

RESET 1

RESET 2

Security

(+)On (-)Off

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nevco Contrôleurs

Nevco

Nevco 475 Baseball Caractéristiques techniques

Nevco

Nevco 398 Caractéristiques techniques

Nevco

Nevco 717 Football Caractéristiques techniques

Nevco

Nevco 354 Caractéristiques techniques

Nevco

Nevco 827 Caractéristiques techniques

Nevco

Nevco 761 Soccer Caractéristiques techniques

Nevco

Nevco 497 Caractéristiques techniques

Nevco

Nevco 750 Baseball Caractéristiques techniques

Nevco

Nevco 376 Caractéristiques techniques

Nevco

Nevco 596 Football Caractéristiques techniques

Nevco

Nevco 530 Caractéristiques techniques

Nevco

Nevco 816 Caractéristiques techniques

Nevco

Nevco Scoreboard MPCX2 Caractéristiques techniques

Nevco

Nevco 486 Caractéristiques techniques

Nevco

Nevco 321 Caractéristiques techniques

Nevco

Nevco 156 Soccer Caractéristiques techniques

Nevco

Nevco 541 Caractéristiques techniques

Nevco

Nevco 871 Hockey Caractéristiques techniques

Nevco

Nevco 145 Caractéristiques techniques

Nevco

Nevco 893 Basketball - 2 Caractéristiques techniques

Nevco

Nevco 431 Caractéristiques techniques

Nevco

Nevco 453 Soccer Caractéristiques techniques

Nevco

Nevco 365 Hockey Caractéristiques techniques

Nevco

Nevco 651 Baseball Caractéristiques techniques

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur