Netvox R718PA9 Manuel utilisateur

Model:R718PA9

Wireless ORP Sensor

Model: R718PA9

Wireless ORP Sensor

R718PA9

User Manual

This document contains prORPietary technical information which is the property of NETVOX Technology. It

shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without

written permission of NETVOX Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction.................................................................................................................2

2. Appearance .................................................................................................................2

3. Main Feature...............................................................................................................3

4. Set Up Instruction.......................................................................................................4

5. Data Report.................................................................................................................5

6. Information about Battery Passivation .......................................................................6

7. Important Maintenance Instruction.............................................................................7

1. Introduction

R718PA9 is a Class A device based on the LoRaWANTM protocol of Netvox and is compatible with

LoRaWAN protocol.

R718PA9 can be connected with an ORP sensor (RS485) externally and report the ORP value of the

solution collected by the device to the corresponding gateway.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

Indicator

Function Key

Adapter

ORP Sensor

3. Main Feature

⚫Adopt SX1276 wireless communication module

⚫RS485 communication

⚫12V DC power supply

⚫ORP sensor detection

⚫The base is equipped with a magnet that can be attached to the iron object

⚫Protection level IP65

⚫Compatible with LoRaWANTM Class A

⚫Frequency hopping spread spectrum technology

⚫Configuring parameters and reading data via the third-party software platforms, and set alarms

via SMS text and email (optional)

⚫Applicable to the third-party platforms: Actility/ ThingPark/ TTN/ MyDevices/ Cayenn

Note:

Battery life is determined by the sensor reporting frequency and other variables, please refer to

http://www.netvox.com.tw/electric/electric_calc.html

On this website, users can find battery lifetime for varied models at different configurations.

4. Set Up Instruction

On/Off

Power On

DC12V adapter

Turn On

DC12V power supply, the green indicator flashing once means

turn on successfully.

Turn Off (Restore to factory setting)

Press and hold the function key for 5 seconds, and the green

indicator flashes 20 times.

Power Off

Remove DC12V adapter

Note

1. On/off interval is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage

components.

2. Five seconds after power on, the device will be in engineering

test mode.

Network Joining

Never Join the Network

Turn on the device to search the network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail

Had Joined the Network

(Not restore to the factory setting)

Turn on the device to search the previous network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail.

Fail to Join the Network

Suggest checking the device registration information on the

gateway or consulting your platform server provider if the device

fails to join the network.

Function Key

Press and Hold for 5 Seconds

Restore to the original setting / turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and

the device sends a data report

The device is not in the network: the green indicator remains off

5. Data Report

After power on, the device will immediately send a version packet report. Then, it will send

another report with the data of ORP value after it is powered on for 20s..

The device sends data according to the default configuration before any other configuring.

Default setting:

MaxTime: Max Interval=180s (3min)

MinTime: The MinTime configuration is not available. But the software has restriction, MinTime

must be configured a number greater than 0.

Note:

1.Report interval is based on the factory default.

2.R718PA9 reports the ORP value.

The device reported data parsing please refer to

Netvox LoraWAN Application Command document and Netvox Lora Command Resolver

http://www.netvox.com.cn:8888/cmddoc

Report Con figuration

(1) Configure R718PA9 device parameter MaxTime = 1min (The MinTime configuration is useless,

but it needs to be set greater than 0 because of the software limitation.)

Downlink: 0157000A003C0000000000

Device Return:

8157000000000000000000 (configuration success)

8157010000000000000000 (configuration failure)

(2) Read R718PA9 device parameter

Downlink: 0257000000000000000000

Device Return:

Description

Device

Cmd

Device

Type

NetvoxPayLoadData

ConfigReport

Req

R718PA9

0x01

0x57

MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed

0x00)

ConfigReport

Rsp

0x81

Status

(0x00_success)

Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq

0x02

Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp

0x82

MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed

0x00)

8257000A003C0000000000 (device current parameter)

6. Information about Battery Passivation

1. R718PA9 has the built-in magnet (as the

figure below) which can be attached to the

surface of an iron object during installation,

which is convenient and quick.

In order to make the installation firmer, please

use screws (purchased separately) to fix the

device to the wall or other surface (as the

figure below).

Note: Do not install the device in a metal

shielded box or in an environment surrounded

by other electrical equipment to avoid

affecting the wireless transmission of the

device.

2. R718PA9 regularly reports the data of ORP

value according to MaxTime. The default Max

Time is 3 minutes.

Note:

MaxTime can be modified by the downlink

command, but it is recommended not to set the

interval too short.

R718PA9 can be applied to detecting the ORP

value of the solution.

Example:

⚫Water Quality Monitor

⚫Industrial Sewage Disposal

⚫Agricultural Irrigation/Aquaculture

⚫Swimming Pool/Hot Spring

Screw

Fixation

Screw

Fixation

Adapter 12V

ORP Sensor

R718PA9

7. Important Maintenance Instruction

Kindly pay attention to the following in order to achieve the best maintenance of the product:

•Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can

corrode electronic circuits. In case the device is wet, please dry it completely.

•Do not use or store in dusty or dirty areas. This way can damage its detachable parts and

electronic components.

•Do not store in excessive heat place. High temperatures can shorten the life of electronic devices,

destroy batteries, and deform or melt some plastic parts.

•Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature,

moisture will form inside which will destroy the board.

•Do not throw, knock or shake the device. Treating equipment roughly can destroy internal circuit

boards and delicate structures.

•Do not wash with strong chemicals, detergents or strong detergents.

•Do not paint the device. Smudges can make debris block detachable parts up and affect normal

operation.

•Do not throw the battery into the fire to prevent the battery from exploding. Damaged batteries

may also explode.

All the above suggestions apply equally to your device, batteries and accessories.

If any device is not operating properly, please take it to the nearest authorized service facility for

repairing.

Socket

Table des matières

Autres manuels netvox Capteur de sécurité

netvox

netvox S31501 Manuel utilisateur

netvox

netvox R313CC Manuel utilisateur

netvox

netvox RA02C Manuel utilisateur

netvox

netvox R718WB2 Manuel utilisateur

netvox

netvox R311W Manuel utilisateur

netvox

netvox R311CB Manuel utilisateur

netvox

netvox R718WA Manuel utilisateur

netvox

netvox R311A Manuel utilisateur

netvox

netvox R718B2 Manuel utilisateur

netvox

netvox R718PA7 Manuel utilisateur

netvox

netvox R718WA2 Manuel utilisateur

netvox

netvox ZB11D Manuel utilisateur

netvox

netvox RA08B Series Manuel utilisateur

netvox

netvox R313FC Manuel utilisateur

netvox

netvox RA08D Series Manuel utilisateur

netvox

netvox Z801TXB Manuel utilisateur

netvox

netvox ZB11C Manuel utilisateur

netvox

netvox R719A Manuel utilisateur

netvox

netvox R313W Manuel utilisateur

netvox

netvox R313LA Manuel utilisateur

netvox

netvox R718WB Manuel utilisateur

netvox

netvox R718B Manuel utilisateur

netvox

netvox RA08D Series Manuel utilisateur

netvox

netvox R313WA Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur

netvox R718PA9 Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques