6
Step2. Power on Z825A. It will start to search and join the network.
Step3. The Network Indicator flashes cyan twice when it finds a network to join.
Step4. The Network Indicator stays cyan after it is joined successfully.
5-2. Permit-Join
Z825A is designed to work as a router. To allow other devices to join the ZigBee network, users could enable
the Permit-Join feature using the tips:
A. Press the Binding Key to enable the Permit-Join feature. The Network Indicator will flash cyan per
second.
B. The default Permit-Join period of time is 60 seconds.
Z825A allows up to 14 End Devices to join its network.
Note: Please remove the touch panel cover to press the binding key.
5-3. Binding
Z825A can be bound with the On/Off device such as Netvox Z501.
Step1. Press and hold the Binding Key for 3 seconds. The Network Indicator will flash cyan once.
Step2. Release the Binding Key and then short press the Binding Key again within 5 seconds.
Step3. Enable the binding feature of the On/Off device.
Step4. The Network Indicator flashes cyan 5 times after the binding is completed; otherwise, it will flash
cyan 10 times.
Note: It supports 36 binding rules/ 36 groups/ 32 scenes
5-4. Control
A. Remote Control
Users are able to use the device which is bound with Z825A to control it.
While the switch is ON, the indicator shows green.
While the switch is OFF, the indicator shows red.
B. Touch Panel Control
Users also can control Z825A via the touch panel.
C. Backlight of tough key: the backlight of touch keys can be adjusted from range 0x00 ~ 0xFE. Users can
press binding key for 6 seconds (the green light flash twice on 3rd and 6th second.) to turn on /off backlight
of touch keys .
