Netvox RA0716 Manuel utilisateur

Model: RA0716_R72616_RA0716Y

Wireless PM2.5/Temperature/Humidity Sensor

Wireless PM2.5 / Temperature /

Humidity Sensor

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained

in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction................................................................................................2

2. Appearance.................................................................................................3

3. Main Feature ..............................................................................................4

4. Set up Instruction.......................................................................................4

5. Data Report ................................................................................................6

6. Installation..................................................................................................8

7. Important Maintenance Instruction..........................................................10

1.Introduction

RA0716_R72616_RA0716Y is a Class A type device based on the LoRaWAN open protocol of Netvox and is compatible with the

LoRaWAN protocol.

RA0716_R72616_RA0716Y can be connected with the sensor of the temperature and humidity and PM2.5. The values collected

by the sensor are reported to the corresponding gateway.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

Built-in PM2.5, Temperature & Humidity

Power Cable

Waterproof cover

Built-in battery pack

Built-in PM2.5, Temperature & Humidity

Solar panel

DC in

Built-in PM2.5 sensor

Function Key

Temperature & Humidity sensor

2. Appearance

Figure 1 RA0716

Figure 2 R72616

Figure 3 RA0716Y

Indicator

3. Main Feature

Compatible with LoRaWAN

RA0716 and RA0716Y applies DC 12V adapters

R72616 applies solar and rechargeable lithium batteries

Simple operation and setting

PM2.5, temperature and humidity detection

Adopt SX1276 wireless communication module

4. Set up Instruction

On/Off

Power On RA0716 and RA0716Y are connected to DC 12V adapter for power on.

R72616 applies solar and rechargeable lithium batteries.

Turn On Connect with power on to turn on

Restore to Factory Setting Press and hold the function key for 5 seconds till green indicator flashes 20 times.

Power Off Disconnect from the power supply

*The engineering test requires to write the engineering testing software separately.

Note The interval between on and off is suggested to be about 10 seconds to avoid the interference

of capacitor inductance and other energy storage components.

Network Joining

Never Join the Network

Turn on the device to search the network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail

Had joined the network

(Not in the original setting)

Turn on the device to search the previous network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail.

Fail to Join the Network Suggest checking the device registration information on the gateway or consulting your

platform server provider if the device fails to join the network.

Function Key

Press and Hold for 5 Seconds

Restore to the original setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and the device sends a data

report

The device is not in the network: the green indicator remains off

Low Voltage Threshold

Low Voltage Threshold 10.5 V

Threshold Restore to Factory Setting

Description

RA0716_R72616_RA0716Y has the function of the power-down saving the memory

of network-joining information. This function acquiesces in turn off, that is, it will

rejoin every time when it is power on. If the device is turned on by the

ResumeNetOnOff command, the last network-joining information will be recorded

when every time it is power on. (including saving the network address information

that it is assigned, etc.) If users want to join a new network, the device needs to

perform the original setting, and it will not rejoin the last network.

Operation Method

1. Press and hold the binding button for 5 seconds and then release

(release the binding button when the LED flashes), and the LED flashes 20 times.

2. The device automatically restarts to rejoin the network.

5. Data Report

After power on, the device will immediately send a version packet report and the data report including the temperature,

humidity, PM2.5 and voltage.

The device sends data according to the default configuration before any other configuring.

ReportMaxTime:

RA0716_ RA0716Y is 180s,

R72616 is 900s (subject to original setting)

ReportMinTime: 30s

ReportChange:0

* The value of the ReportMaxTime should be greater than (ReportType count *ReportMinTime+10). (unit: second)

* ReportType count = 1

Note:

(1) The cycle of the device sending the data report is according to the default.

(2) The interval between two reports must be the MaxTime.

(3) ReportChange is not supported by RA0716_R72616_RA0716Y (Invalid configuration). The data report is sent

according to ReportMaxTime as a cycle (the first data report is the start to the end of a cycle).

(4) Data pocket: PM2.5, voltage, temperature and humidity.

(5) The device also supports the TxPeriod cycle configuration instructions of Cayenne. Therefore, the device can

perform the report according to the TxPeriod cycle. The particular report cycle is ReportMaxTime or TxPeriod

depending on which report cycle was configured last time.

(6) It would take 35 seconds for the sensor to sample and process the collected value after pressing the button, please be patient.

The device reported data parsing please refer to

Netvox LoraWAN Application Command document and Netvox Lora Command Resolver

http://www.netvox.com.cn:8888/page/index

Report Configuration

（1）Configure RA0716 device parameter MinTime = 30s, MaxTime = 120s (120>30*1+10)

Downlink: 0135001E00780000000000

Device Return:

8135000000000000000000 (configuration success)

8135010000000000000000 (configuration failure)

（2）Read RA0716 device parameter

Downlink: 0235000000000000000000

Device Return:

8235001E00780000000000 (device current parameter)

Description Device CmdI

D DeviceType NetvoxPayLoadData

ConfigRepo

rtReq

RA0716

R72616

RA0716Y

0x01

0x35

0x36

0x37

MinTime

(2bytes Unit:s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

ConfigRepo

rtRsp 0x81 Status

(0x00_success)

Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq 0x02 Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

6.Installation

1．RA0716 does not have the waterproof function. After the device completes joining the network, please place it indoor.

2．R72616 has a waterproof function. After the device completes joining the network, please place it outdoors.

(1)In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of R72617, and

then make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of R72616.

Install the washer and the nut in order and lock the nut till R72616 body is stable and does not shake.

(2)At the upper side of the fixed position of R72616, loosen the two U-shaped screws, the mating washer and nut on

the side of the solar panel. Make the U-shaped screw pass through the appropriate size cylinder and fix them on the

main bracket

of the solar panel and install the washer and the nut in sequence. Lock nut till the solar panel is stable and does not

shake.

(3) After adjusting the angle of the solar panel completely, lock the nut.

(4) Connect the top waterproof cable of R72617 with the wiring of the solar panel and lock it tight.

（5）Rechargeable lithium battery

R72616 has a battery pack inside. Users can buy and install rechargeable 18650 lithium battery, a total of 3 sections,

voltage 3.7V/ every single rechargeable lithium battery, recommended capacity 5000mah. The installation of

rechargeable lithium battery steps are as follows:

1: Remove the four screws around battery cover.

2: Insert three 18650 lithium batteries. (Please make sure the positive and negative level of the battery)

3: Press the activation button on the battery pack for the first time.

4: After activation, close the battery cover and lock the screws around battery cover.

Fig. Rechargeable Lithium Battery

3．RA0716Y is waterproof and can be placed outdoors after the device completes joining the network..

(1) In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of RA0716Y, and then

make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of RA0716Y. Install

the washer and the nut in order and lock the nut till RA0716Y body is stable and does not shake.

(2) Loosen the M5 nut at the bottom of the RA0716Y matte and take the matte together with the screw.

(3) Make the DC adaptor pass through the central hole of the bottom cover of RA0716Y and insert it into the RA0716Y DC

socket, and then put the mating screw to the original position and lock the M5 nut tight.

Autres manuels pour RA0716

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels netvox Accessoires

netvox

netvox R311G Manuel utilisateur

netvox

netvox R718LB2 Manuel utilisateur

netvox

netvox R718PA1 Manuel utilisateur

netvox

netvox R718G Manuel utilisateur

netvox

netvox R718NL3 Series Manuel utilisateur

netvox

netvox R727 Manuel utilisateur

netvox

netvox R718MA Manuel utilisateur

netvox

netvox R315 Series Manuel utilisateur

netvox

netvox R313G Manuel utilisateur

netvox

netvox R718X Manuel utilisateur

netvox

netvox R711 Manuel utilisateur

netvox

netvox R816B01 Manuel utilisateur

netvox

netvox R718PE01 Manuel utilisateur

netvox

netvox R312 Manuel utilisateur

netvox

netvox R718PA9 Manuel utilisateur

netvox

netvox ZigBee Z311G Manuel utilisateur

netvox

netvox R718UBB Series Manuel utilisateur

netvox

netvox R809A Manuel utilisateur

netvox

netvox R809A Manuel utilisateur

netvox

netvox R311LA Manuel utilisateur

netvox

netvox R718DA2 Manuel utilisateur

netvox

netvox R718AD Manuel utilisateur

netvox

netvox R72615 Manuel utilisateur

netvox

netvox RA0716 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur