Netvox R718N3 Manuel utilisateur

Model：R718N3

Wireless Three-phase Current Detection Sensor

R718N3

User Manual

Table of Content

1. Introduction................................................................................................................................................................ 2

2. Appearance................................................................................................................................................................. 3

3. Main Features............................................................................................................................................................. 3

4.Set up Instruction.........................................................................................................................................................4

4.1 Power on and Turn on / off...............................................................................................................................4

4.2 Join Into LoRa Network...................................................................................................................................4

4.3 Function Key.................................................................................................................................................... 4

4.4 Data Report.......................................................................................................................................................5

5. Restore to Factory Setting.......................................................................................................................................... 5

6. Sleeping Mode............................................................................................................................................................6

7. Low Voltage Alarming............................................................................................................................................... 6

8. Measurement Range and Accuracy............................................................................................................................6

9. Installation.................................................................................................................................................................. 6

10. Important Maintenance Instruction.......................................................................................................................... 7

1. Introduction

The R718N3 is a three-phase current sensing device for Netvox Class A type devices based on the

LoRaWAN open protocol and is compatible with the LoRaWAN protocol.

(1) Check the AC three-phase current according to reporting time configuration.

(2) Press the key to detect the current three-phase current, and report a command of three-phase

current value report.

(3) The R718N3 is available in a variety of sub-models as below (split-core CT).

R718N37 Wireless 3-Phase Current Meter with 3 x 75A CT

R718N315 Wireless 3-Phase Current Meter with 3 x 150A CT

R718N325 Wireless 3-Phase Current Meter with 3 x 250A CT

R718N363 Wireless 3-Phase Current Meter with 3 x 630A CT

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

Fig.1 R718N3 (Split-core CT) Appearance

3. Main Features

Compatible with LoRaWAN protocol.

Powered by 2 x ER14505 3.6V Lithium battery

Easy set up and installation

Detect three phase current value

4.Set up Instruction

4.1 Power on and Turn on / off

(1) Power on and turn on: open the battery cover; insert batteries; close the battery cover; the

device is at off mode by default setting. Press and hold function key for 3 seconds till the green

indicator flashes and release to turn on.

(2) Turn off: Press and hold function key for 5 seconds till the green indicator flashes quickly and

release. The green indicator will flash 20 times to show that the device is turned off.

Note:

1. The interval between shutting down twice or power off/on is suggested to be about 10 seconds to

avoid the interference of capacitor inductance and other energy storage components.

2. “Turn off” operation and “Restore to Factory Setting” operation are the same.

4.2 Join Into LoRa Network

To join the device into LoRa network to communicate with LoRa gateway.

The network operation is as following:

(1) If the device had never joined any network, turn on the device; it will search an available LoRa

network to join. The green indicator will stay on for 5 seconds to show it joins into the network,

otherwise, the green indicator does not work.

(2) If R718N3 had been joined into a LoRa network, remove and insert the batteries; it will repeat

step (1).

4.3 Function Key

(1) Press and hold function key for 5 seconds to reset to factory setting. After restoring to

factory setting successfully, the green indicator will flashes quickly 20 times.

(2) Press function key to turn on the device which is in the network and the green indicator will flash

once and the device will send a data report.

4.4 Data Report

When the device is turned on, it will immediately send a version package and a cluster report which

includes battery voltage and three-phase current values.

Data will be reported once per hour by default setting.

Maximum time: 3600 seconds

Minimum time: 3600 seconds

Default reportchange:

Battery --- 0x01 (0.1V)

Note:

Data sending cycle is programmed by real configuration.

The interval between two reports must be Min. Interval.

Three-phase current detection:

When the key is pressed, a report is sent immediately to return the current three-phase current value.

Or it detects and returns current information when the time configuration is due.

Data report configuration and sending period are as following:

5. Restore to Factory Setting

To restore to factory setting, users need to execute below operations.

1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED

flashes quickly 20 times.

2. R718N3 is at off mode by default setting after restoring to factory setting.

Note: “Turn off” operation and “Restore to Factory Setting” operation are the same.

Min. Interval

(Unit:second)

Max. Interval

(Unit:second)

Reportable

Change

Current Change≥

Reportable Change

Current Change ＜

Reportable Change

Any number

between 30~65535

Any number

between

Min.~65535

Can not be 0. Report

per Min. Interval

Report

per Max. Interval

6. Sleeping Mode

R718N3 is designed to enter sleeping mode for power-saving in some situations:

(A) While the device is in the network → the sleeping period is Min Interval. (During this

period, if the reportchange of three-phase current is larger than setting value, it will wake up

and send a data report).

(B) When it is not in the network → R718N3 will enter sleeping mode and wake up every 15

seconds to search a network to join in the first two minutes. After two minutes, it will wake up

every 15 minutes to request to join the network.

If it’s at (B) status, to prevent this unwanted power consumption, we recommend that users

remove the batteries to power off the device.

7. Low Voltage Alarming

The operating voltage threshold is 3.2V. If the battery voltage is lower than 3.2V, R718N3 will

send a low-power warning to the LoRa network.

8. Measurement Range and Accuracy

R718N37 (open loop CT) measurement range is 1A~75A (±1%),

R718N315 (open loop CT) measurement range is 1A~150A (±1%),

R718N325 (open loop CT) measurement range is 1A~250A (±1%),

R718N363 (open loop CT) measurement range is 10A ~ 630A (±1%).

9. Installation

This product comes with waterproof function. When using it, the back of it can be adsorbed on the

iron surface, or the two ends can be fixed to the wall with screws. When installing the current

transformer, separate the fire and neutral wires of the three-phase electric power, and take out the fire

wire through current transformer and start the measurement according to the wiring below:

(Current direction, K-->L)

10. Important Maintenance Instruction

Your device is a product of superior design and craftsmanship and should be used with care. The

following suggestions will help you use the warranty service effectively.

• Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals that

can corrode electronic circuits. In case the device is wet, please dry it completely.

• Do not use or store in dusty or dirty areas. This can damage its detachable parts and electronic

components.

• Do not store in excessive heat. High temperatures can shorten the life of electronic devices, destroy

batteries, and deform or melt some plastic parts.

• Do not store in a cold place. Otherwise, when the temperature rises to normal temperature,

moisture will form inside, which will destroy the board.

• Do not throw, knock or shake the device. Rough handling of equipment can destroy internal circuit

boards and delicate structures.

• Do not wash with strong chemicals, detergents or strong detergents.

• Do not apply with paint. Smudges can block debris in detachable parts and affect normal operation.

• Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries may

also explode.

All of the above suggestions apply equally to your device, battery and accessories. If any device is

not working properly.

Please take it to the nearest authorized service facility for repair.

Autres manuels pour R718N3

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels netvox Accessoires

netvox

netvox R718DB Manuel utilisateur

netvox

netvox RA0716 Manuel utilisateur

netvox

netvox R313K Manuel utilisateur

netvox

netvox R718CXAB Manuel utilisateur

netvox

netvox ZigBee Z311G Manuel utilisateur

netvox

netvox R72616A Manuel utilisateur

netvox

netvox R718VB Manuel utilisateur

netvox

netvox R718PB15A Manuel utilisateur

netvox

netvox R718X Manuel utilisateur

netvox

netvox R718PB13 Manuel utilisateur

netvox

netvox R718AD Manuel utilisateur

netvox

netvox ZigBee ZB11B Manuel utilisateur

netvox

netvox R718PG-AS923 Manuel utilisateur

netvox

netvox R718CT Manuel utilisateur

netvox

netvox R718PE01 Manuel utilisateur

netvox

netvox R718VA Manuel utilisateur

netvox

netvox RA0701 Manuel utilisateur

netvox

netvox R718N1 Manuel utilisateur

netvox

netvox R809A Manuel utilisateur

netvox

netvox R718PA1 Manuel utilisateur

netvox

netvox R311D Manuel utilisateur

netvox

netvox RB11E Manuel utilisateur

netvox

netvox R313DA Manuel utilisateur

netvox

netvox R718DA2 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

netvox R718N3 Manuel utilisateur

Manuels Accessoires populaires d'autres marques