NETGEAR 208-10026-01 Guide de l'utilisateur

208-10026-01

2006-2

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

ADSL Modem Router

Setup Manual

v1.1, 2006-2

Trademarks

NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective

holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

v1.1, 2006-2

Contents

ADSL Modem Router Setup Manual

Chapter 1

Connecting the Router to the Internet

What’s in the Box? ..........................................................................................................1-1

The Router’s Front Panel .........................................................................................1-2

The Router’s Rear Panel .........................................................................................1-3

What You Need Before You Begin ..................................................................................1-3

Internet Configuration Requirements .......................................................................1-4

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup ......................................1-4

Smart Wizard Setup .......................................................................................................1-4

Manual Setup .................................................................................................................1-5

Understanding ADSL Microfilters .............................................................................1-5

Computers Set to DHCP ..........................................................................................1-6

Manually Setting Up Your ADSL Modem Router ............................................................1-6

Chapter 2

Troubleshooting

Basic Functioning ...........................................................................................................2-1

Power LED Not On ...................................................................................................2-2

Test LED Never Turns On or Test LED Stays On .....................................................2-2

LAN or ADSL Internet Port LEDs Not On .................................................................2-3

Troubleshooting the Web Configuration Interface ..........................................................2-3

Troubleshooting the ISP Connection ..............................................................................2-4

ADSL link .................................................................................................................2-4

Obtaining an Internet IP Address .............................................................................2-5

Troubleshooting PPPoE or PPPoA ..........................................................................2-6

Troubleshooting Internet Browsing ..........................................................................2-7

Troubleshooting a TCP/IP Network Using the Ping Utility ..............................................2-7

Testing the LAN Path to Your Router .......................................................................2-7

v1.1, 2006-2

Testing the Path from Your Computer to a Remote Device .....................................2-8

Restoring the Default Configuration and Password ........................................................2-9

Using the Reset Button ............................................................................................2-9

Appendix A

Technical Specifications

Appendix B

Related Documents

Connecting the Router to the Internet 1-1

v1.1, 2006-2

Chapter 1

Connecting the Router to the Internet

This chapter describes how to set up the router on your Local Area Network (LAN) and connect to

the Internet. It describes how to set up your ADSL modem router for Internet access and configure

basic wireless connectivity.

What’s in the Box?

The product package should contain the following items:

• ADSL Modem Router

• AC power adapter (varies by region)

• Category 5 (Cat 5) Ethernet cable

• Telephone cable with RJ-11 connector

• Microfilters (quantity and type vary by region)

•Resource CD, including:

— The Smart Wizard Installation Assistant

— This manual

• Warranty and Support Information cards

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the

carton, including the original packing materials, in case you need to return the product for repair.

ADSL Modem Router Setup Manual

1-2 Connecting the Router to the Internet

v1.1, 2006-2

The Router’s Front Panel

The ADSL modem router front panel shown below contains status LEDs.

You can use the LEDs to verify various conditions. Table 1-1 describes each LED.

Figure 1-1

Table 1-1. LED Descriptions

Label Activity Description

1. Power On

Off Power is supplied to the router.

Power is not supplied to the router.

2. Test On

Off The system is initializing.

The system is ready and running.

3. Internet Blink -- Amber

On -- Green

Blink -- Green

Indicates ADSL training.

The Internet port has detected a link with an attached device.

Data is being transmitted or received by the Internet port.

4. LAN

On (Green)

Blink (Green)

On (Amber)

Blink (Amber)

Off

The Local port has detected a link with a 100 Mbps device.

Data is being transmitted or received at 100 Mbps.

The Local port has detected a link with a 10 Mbps device.

Data is being transmitted or received at 10 Mbps.

No link is detected on this port.

1234

ADSL Modem Router Setup Manual

Connecting the Router to the Internet 1-3

v1.1, 2006-2

The Router’s Rear Panel

The rear panel of the ADSL modem router contains port connections.

Viewed from left to right, the rear panel contains the following elements:

1. RJ-11 ADSL port for connecting the router to an ADSL line

2. Four Local Ethernet RJ-45 LAN ports for connecting the router to the local computers

3. AC power adapter outlet

4. Factory Default Reset push button

What You Need Before You Begin

You need to prepare the following before you can set up your router:

• Active Internet service provided by an ADSL account.

• The Internet Service Provider (ISP) configuration information for your ADSL account.

• ASDL microfilters as explained below.

• Your computers set to DHCP.

Figure 1-2

ADSL Modem Router Setup Manual

1-4 Connecting the Router to the Internet

v1.1, 2006-2

Internet Configuration Requirements

Depending on how your ISP set up your Internet account, you need one or more of these

configuration parameters to connect your router to the Internet:

• Virtual Path Identifier (VPI)/Virtual Channel Indentifier (VCI) parameters

• Multiplexing Method

• Host and Domain Names

• ISP Login Name and Password

• ISP Domain Name Server (DNS) Addresses

• Fixed or Static IP Address

Your ISP should have provided you with all the information needed to connect to the Internet. If

you cannot locate this information, you can ask your ISP to provide it.

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup

You have two methods available for setting up your ADSL modem router:

•Smart Wizard Setup: Use the Smart Wizard on the CD to assist you with setting up your

ADSL modem router.

— This option is the easiest. The Smart Wizard on the CD guides you through the setup

process, automating many of the steps, and verifying that necessary conditions exist and

that steps you perform have been successfully completed.

— This option requires a PC running Microsoft Windows 98SE or higher.

•Manual Setup: Manually set up your ADSL modem router.

— This option is best if you are replacing an existing ADSL modem router or are technically

knowledgeable.

— Use this option if you are using a computer that does not run Microsoft Windows.

— The manual setup procedures are documented in this manual.

Use the setup option that best suites you.

Smart Wizard Setup

The Smart Wizard setup process should take about 20 minutes to complete.

ADSL Modem Router Setup Manual

Connecting the Router to the Internet 1-5

v1.1, 2006-2

1. Locate the ADSL settings information your Internet service provider gave you.

2. Insert the NETGEAR CD into a Windows PC.

The CD will automatically start and detect the language you are using on your PC.

3. Accept the language option or change to a different language.

4. Click Next to proceed.

5. Click Setup to start the Smart Wizard installation assistant. Follow the instructions on the

screen.

Manual Setup

Use the topics and procedures below to manually set up your ADSL modem router.

Understanding ADSL Microfilters

ADSL technology uses the same wires as your telephone service. However, ADSL adds signals to

the telephone lines which create noise in the telephone service. You must use ADSL microfilters to

filter out these signals before they reach your telephone.

Note: If the CD does not automatically start, browse the CD and double-click on

Autorun.

Note: If you purchased the ADSL modem router in a country where a microfilter is not

included, you must acquire one.

ADSL Modem Router Setup Manual

1-6 Connecting the Router to the Internet

v1.1, 2006-2

ADSL Microfilter

Each device such as a telephone, fax machine, answering machine, or caller ID display will require

an ADSL microfilter.

ADSL Microfilter with Built-In Splitter

Use an ADSL microfilter with built-in splitter when there is a single wall outlet which must

provide connectivity for both the ADSL modem router and telephone equipment.

Computers Set to DHCP

For the initial connection to your router, your computer has to be set to automatically get its

TCP/IP configuration from the router via DHCP. This is usually the case. The NETGEAR Smart

Wizard CD automatically takes care of this requirement. For manual setup, refer to the

documentation that came with your computer.

Manually Setting Up Your ADSL Modem Router

There are four steps to setting up your ADSL modem router:

Figure 1-3

Warning: Do not connect the ADSL modem router to the ADSL line through a

microfilter unless the microfilter is a combination microfilter/splitter

specifically designed for this purpose. Doing so will prevent block your

connection to the Internet. If you have any doubts about this, connect the

ADSL modem router directly to the ADSL line.

Figure 1-4

Phone

ADSL

Line

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR WNDR4300 Feuille d'instructions

NETGEAR

NETGEAR JNR3210 Manuel de la liste des pièces

NETGEAR

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Manuel utilisateur

NETGEAR

NETGEAR Nighthawk RAX200 Manuel utilisateur

NETGEAR

NETGEAR RT311 Manuel utilisateur

NETGEAR

NETGEAR ProSAFE GS108PEv3 Manuel utilisateur

NETGEAR

NETGEAR FS308 - Switch Manuel utilisateur

NETGEAR

NETGEAR R6200v2 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk R7200 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk R7100LG Manuel utilisateur

NETGEAR

NETGEAR WGT624v2 - 108 Mbps Wireless Firewall Router Manuel utilisateur

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Manuel utilisateur

NETGEAR

NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall... Manuel utilisateur

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Manuel utilisateur

NETGEAR

NETGEAR RP614 v4 Manuel de référence

NETGEAR

NETGEAR DGN2200M - Wireless-N 300 Router Manuel utilisateur

NETGEAR

NETGEAR RP614 v4 Manuel utilisateur

NETGEAR

NETGEAR C7800 Manuel utilisateur

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4 Manuel utilisateur

NETGEAR

NETGEAR N750 Manuel utilisateur

NETGEAR

NETGEAR ME101 - Wireless EN Bridge Network Converter Manuel utilisateur

NETGEAR

NETGEAR XR450 Manuel utilisateur

NETGEAR

NETGEAR XS512EM Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur