NETGEAR PLP1200 Manuel utilisateur

Quick Start

Powerline 1200 + Extra Outlet

Model PLP1200

Package Contents

In some regions, a resource CD is included with your product.

Getting Started

Powerline adapters provide an alternative way to extend your network

using your existing electrical wiring. Plug two or more Powerline adapters

into electrical outlets to create a wired network connection. You can add

up to 16 Homeplug AV-certiﬁed and AV2-certiﬁed adapters to extend

your network. For a complete list of Homeplug AV-certiﬁed devices, visit

http://www.homeplug.org/certiﬁed_products.

Meet Your Adapter

Before you install your adapter, familiarize yourself with its LEDs,

buttons, and port.

Ethernet port Security button

Factory Reset button

Power LED

Ethernet LED

Pick A Plug LED

Power LED Green. The electrical power is on.

Amber. The adapter is in power saving mode.

Blinking green. The adapter is in the process of setting up

security.

O. The adapter is not receiving electrical power.

Ethernet LED Lit. The Ethernet port is linked.

O. No Ethernet connection is detected.

Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with

the strongest performance, indicated by the color displayed

by the LED:

Red. Link rate < 50 Mbps (good).

Amber. Link rate > 50 and < 80 Mbps (better).

Green. Link rate > 80 Mbps (best).

O. The adapter did not ﬁnd any other compatible Powerline

devices using the same encryption key.

Factory Reset

button

Press the Factory Reset button for one second, then release

it to return the Powerline adapter to its factory default

settings.

Ethernet port Use an Ethernet cable to connect your wired devices,

including computers, WiFi routers, or game consoles, to your

Powerline network.

Security button Use the Security button to create a secure Powerline

network.

Install Your Adapters

Room 1 Room 2

Secure Your Network

¾To create a secure network:

1. Plug in your new adapters.

2. Wait until the Pick A Plug LED is lit.

3. Press the Security button for two seconds, then press the Security

button on one of the other adapters in your existing network for two

seconds. Both buttons must be pressed within two minutes.

Note: The Security button does not work in power saving mode (see

Troubleshooting Tips on page 10).

Warning: Do not press the

Security

button on the Powerline adapter

until installation is complete and the adapters are communicating with

each other (indicated by the blinking Power LED). Pressing this button too

soon can temporarily disable Powerline communication. If this occurs, use

the Factory Reset button to return the Powerline adapter to its factory

default settings.

Note: If you want to add another adapter aer creating a secure

Powerline network, perform a factory reset on all of the adapters and then

perform this procedure.

Add Adapters

To add adapters before you conﬁgure the security feature, just plug them

in and connect the adapters to your equipment.

¾To add adapters to a Powerline network with security set:

1. Plug in and connect the new adapters.

2. On all of the previously installed adapters, press and hold the Factory

Reset button for one second.

This returns them to the factory settings.

3. Secure the Powerline network:

a. On any of the adapters, press and hold the Security button

for two seconds.

b. On any one of the other adapters, press and hold the

Security button for two seconds.

Both buttons must be pressed within two minutes.

Troubleshooting Tips

Power LED is o. Make sure that power is supplied to the electrical

outlet, and that the Powerline devices are not plugged

into an extension cord, power strip, or surge protector.

Power LED is blinking

amber.

Power saving mode occurs when the Ethernet LED is

o. This can occur in the following circumstances:

• The Ethernet cable is unplugged.

• The device connected through the Ethernet cable

is turned o.

• The adapter is idle for 10 minutes.

It returns to normal mode within two seconds

aer the Ethernet link is up.

Pick A Plug LED is o. • If you already set network security, make sure

that all Powerline devices are using the same

encryption key; see the online user manual for

details.

• Press the Factory Reset button on each device

for one second to return the Powerline adapter to

its factory default settings.

Autres manuels pour PLP1200

Table des matières

Autres manuels NETGEAR Adaptateur

NETGEAR

NETGEAR WNA1000 - Wireless-N 150 USB Adapter Manuel utilisateur

NETGEAR

NETGEAR XAVB2501 Manuel utilisateur

NETGEAR

NETGEAR XAV1601 Manuel utilisateur

NETGEAR

NETGEAR A6100 Manuel utilisateur

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Manuel utilisateur

NETGEAR

NETGEAR XAV6501 Manuel utilisateur

NETGEAR

NETGEAR EPS90W Manuel utilisateur

NETGEAR

NETGEAR GA511 - Gigabit Ethernet PC Card Manuel utilisateur

NETGEAR

NETGEAR XAV1101/XAVB1101 Manuel utilisateur

NETGEAR

NETGEAR WN121T - RangeMax Next Wireless-N USB 2.0... Manuel utilisateur

NETGEAR

NETGEAR WN511B - Next Wireless Pc Card Manuel utilisateur

NETGEAR

NETGEAR XAV101 - Powerline AV EN Adapter Bridge Manuel utilisateur

NETGEAR

NETGEAR A6150 Manuel utilisateur

NETGEAR

NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter Manuel utilisateur

NETGEAR

NETGEAR EPS90W Manuel utilisateur

NETGEAR

NETGEAR PL1000 Manuel utilisateur

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PTV3000 Manuel utilisateur

NETGEAR

NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre... Manuel utilisateur

NETGEAR

NETGEAR Powerline 500 Nano Manuel utilisateur

NETGEAR

NETGEAR DST6501 Manuel utilisateur

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Manuel d'utilisation

NETGEAR

NETGEAR XAV1004 - Powerline AV Adapter Manuel utilisateur

NETGEAR

NETGEAR XAV2001 - Powerline AV Ethernet Adapter Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur

Koolatron

Koolatron AC16 Manuel utilisateur