NETGEAR WNA3100M Manuel utilisateur

Installation Guide

N300 WiFi USB Mini Adapter

Model WNA3100M

Package Contents

N130Wireless Micro USB Adapter

WNA3100M

N300 Wireless Adapter

Resource CD with NETGEAR Genie

Installation

Estimated completion time: 10 minutes.

1. Insert the Resource CD in your computer’s CD drive. If the CD main screen

does not display, browse the files on the CD, and double-click Autorun.exe.

2. Click Setup.

The Software Update Check screen displays.

3. If you are connected to the Internet, click Check for Updates. If not, then click

Install from CD.

4. Click I agree to accept the license agreement, and then click Next.

A message displays asking you to wait while software is installed. This might

take a few minutes. Then you are prompted to insert your adapter.

5. Insert the adapter into a USB port on your computer.

Note: For best results, put the wireless adapter at least 4 feet (1 meter) away

from your router.

6. Click Next.

NETGEAR Genie displays a list of wireless networks in your area.

Join a Wireless Network

You can join a wireless network from this NETGEAR Genie screen, or you can use

Wi-Fi Protected Setup (WPS) if your wireless network supports it.

• NETGEAR Genie: Click your wireless network to select it from the list, and then

click Connect. If the network is secure, enter its password or network key.

• WPS: Press and hold the WPS button on the side of the adapter for 2 seconds.

Within 2 minutes, press the WPSbutton on your wireless router or gateway.

The adapter joins the network, which can take a few minutes. Your settings are

saved in a profile.

October 2014

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

Check Your Connection Status

When you install your adapter, the adapter’s NETGEAR genie icon displays in the

Windows system tray and on the desktop. You can double-click this icon to open

NETGEAR genie to make changes or connect to a different WiFi network. The color

of the icon indicates the strength of your WiFi connection:

White. Strong connection

Yellow. Weak connection

Red. No connection

If you remove your adapter, NETGEAR genie is not available, so the icon does not

display. When you insert the adapter again, the icon returns.

Support

Thank you for purchasing this NETGEAR product.

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

You can get the user manual online at http://downloadcenter.netgear.com or

through a link in the product’s user interface.

For the current EU Declaration of Conformity, visit 

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit 

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Autres manuels pour WNA3100M

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Adaptateur

NETGEAR

NETGEAR XE602 - Powerline Ethernet Adapter Manuel utilisateur

NETGEAR

NETGEAR WN311B Manuel utilisateur

NETGEAR

NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Manuel utilisateur

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Manuel

NETGEAR

NETGEAR Wg111v2 - Usb Wifi Card Includes Driver Cd Manuel

NETGEAR

NETGEAR RB-WPN111NA Manuel utilisateur

NETGEAR

NETGEAR XAV6501 Manuel utilisateur

NETGEAR

NETGEAR XAV5601 Manuel utilisateur

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Manuel utilisateur

NETGEAR

NETGEAR XAVB1401 Manuel utilisateur

NETGEAR

NETGEAR Powerline 500 XWNB5221 Manuel utilisateur

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Manuel utilisateur

NETGEAR

NETGEAR AVB5201v2 Manuel utilisateur

NETGEAR

NETGEAR GA621 Manuel utilisateur

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Manuel utilisateur

NETGEAR

NETGEAR TA612V Manuel utilisateur

NETGEAR

NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Manuel d'utilisation

NETGEAR

NETGEAR XAV2602 Manuel utilisateur

NETGEAR

NETGEAR Arlo Go Manuel utilisateur

NETGEAR

NETGEAR XAVB1601 Manuel utilisateur

NETGEAR

NETGEAR WNDA4100 Manuel utilisateur

NETGEAR

NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre... Manuel utilisateur

NETGEAR

NETGEAR A6100 Manuel utilisateur

NETGEAR

NETGEAR PowerLINE 1000 Series Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur

Koolatron

Koolatron AC16 Manuel utilisateur