NetComm N3G002W Guide de démarrage rapide

Autres manuels pour N3G002W

4

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels NetComm Routeur réseau

NetComm

NetComm 4G100W Manuel utilisateur

NetComm

NetComm NB8WVPN Manuel utilisateur

NetComm

NetComm CallDirect NTC-6908 Manuel utilisateur

NetComm

NetComm 3G15Wn Manuel utilisateur

NetComm

NetComm 3G42W-M Manuel utilisateur

NetComm

NetComm NB3 Manuel utilisateur

NetComm

NetComm Videotron 3G39W-V Manuel utilisateur

NetComm

NetComm NB604 Manuel utilisateur

NetComm

NetComm NB750 Manuel utilisateur

NetComm

NetComm Liberty 3GM2WN Manuel d'exploitation

NetComm

NetComm Poe01 Manuel utilisateur

NetComm

NetComm NB1 Manuel utilisateur

NetComm

NetComm VELOCITY NP805N Manuel utilisateur

NetComm

NetComm Whitepaper TR-069 Manuel utilisateur

NetComm

NetComm Videotron 3G36W-V Manuel utilisateur

NetComm

NetComm 3G9WB Mode d’emploi

NetComm

NetComm RTA1320 Manuel utilisateur

NetComm

NetComm Dynalink WSG-NP804n Manuel utilisateur

NetComm

NetComm NB4 Manuel utilisateur

NetComm

NetComm NB1 Manuel utilisateur

NetComm

NetComm Roadster V.92 AM5698 Manuel utilisateur

NetComm

NetComm N3G007W Manuel utilisateur

NetComm

NetComm 3G42W-M Manuel utilisateur

NetComm

NetComm N300 GATEWAY SERIES Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

N3G002W / N3G005W / N3G007W Firmware Upgrade Instructions

Purpose: This document describes the steps necessary to perform a firmware

upgrade on the N3G002W / N3G005W / N3G007W with the latest

firmware available on the NetComm website).

To ensure a successful firmware upgrade please follow the below

instructions.

Firmware files location:

To download the latest firmware of N3G002W / N3G005W /

N3G007W, please click on the below link:

For N3G002W:

For N3G005W:

For N3G007W:

Click on to the firmware file .exe or .BIN) and save it on your local PC.

Warning:

Please ensure that your 3G USB Modem is not attached to N3G 2W / N3G 5W/

N3G 7W during the upgrade process as this may damage the N3G 2W/ N3G 5W/

N3G 7W and void your warranty.

For Upgrading with the .executable file

Upgrade Steps:

1) For user using the exe file to upgrade the firmware:

2) Power on the N3G002W / N3G005W / N3G007W with the supplied power adapter.

3) Wait approximately 2 minutes for the device to finish starting up.

4) Plug in one end of the Ethernet cable to the LAN port on the N3G002W / N3G005W /

N3G007W.

5) Plug the other end of the Ethernet cable to the LAN port of your computer.

6) Please wait approximately 20 seconds.

http://www.netcomm.com.au/sm/firmware/n3g002w

http://www.netcomm.com.au/sm/firmware/n3g005w

http://www.netcomm.com.au/sm/firmware/n3g007w

7) Double click the Firmware_version.exe

8) Type in the IP address of 192.168.123.254 and the Password “admin” on the

password field.

9) Click Upgrade to proceed. It will take a few minutes to proceed upgrading till the

status bar reaches 100%.

10) Please note that it takes approximately 3 minutes for the N3G002W / N3G005W /

N3G007W to upgrade. DO NOT turn off your N3G002W / N3G005W / N3G007W

during the firmware upgrade process

11) N3G002W / N3G005W / N3G007W will reboot itself after upgrade.

For Upgrading with the .BIN file

Upgrade Steps:

1. Power on the N3G002W / N3G005W / N3G007W with the supplied power adapter.

2. Wait approximately 2 minutes for the device to finish starting up.

3. Plug in one end of the Ethernet cable to the LAN port on the N3G002W / N3G005W /

N3G007W.

4. Plug the other end of the Ethernet cable to the LAN port of your computer.

5. Please wait approximately 20 seconds.

6. Open your web browser.

7. Type in http://192.168.123.254 on the address bar.

8. From the Login page, type in:

Username: admin

Password: admin

Press “Login” to log in.

9. Click Advanced Setup, then click TOOLBOX on the top menu, select Firmware

Upgrade in the left-hand side menu;

10. Press the Browse button to select a firmware file to upgrade with and press Upgrade

button.

11. Please note that it takes approximately 3 minutes for the N3G002W / N3G005W /

N3G007W to upgrade. DO NOT turn off your N3G002W / N3G005W / N3G007W

during the firmware upgrade process.

12. N3G002W / N3G005W / N3G007W will reboot itself after upgrade, then it should

come up as following: