NetComm Wireless NTC-6908 Manuel utilisateur

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Evolution – NetComm Wireless 3G Industrial M2M Router (NTC-6908)

This guide will hopefully explain how to configure your NetComm 3G router for remote connect to a

site with the Evolution System.

How it works?

The NetComm Wireless 3G Router is an internet modem that will have a public IP address. This

allows TCP/IP connections to be made to the site without the need of a phone line (ADSL) at the site.

This modem can be used for remote connection for the Access System as well as other services such

as CCTV.

What is required?

•NetComm Wireless 3G Industrial M2M Router (NTC-6908 or equivalent)

•Lantronix XPort LAN Module (to connect the NetComm Wireless to the EVO controller(s)).

•Dynamic DNS service account

•Mini SIM Data Card with encoded MICA codes (see note below on MICA codes)

Note: You do NOT want a ‘Micro’ or ‘Nano’ SIM cards. The larger ‘mini SIM is required.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Ordering your SIM card: Mini SIM Data Card with Access Point Name (APN)

The NetComm Wireless Router requires a Mini SIM DATA card with available data and configured to

have an ‘Access Point Name’ (APN) for remote access.

The APN settings are setup by Telstra and they can encode special MICA codes to your SIM card

(they can perform this action when the SIM card is online). Once done you will be able to establish an

external connection to the NetComm Router.

When ordering your SIM card there are several different APNs available from Telstra and are listed

below. Each APN requires a different MICA code to be written to the SIM card by Telstra.

For this application you will require the telstra.extranet (MICA CODE - GPEXB) to be written and

setup on the card.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Configuring Your Router

You will need the following hardware to set up your router.

•NetComm Wireless Router

•Laptop or PC

•Activated Mini SIM Data card

•4 Port LAN Switch (not needed at the site but will make configuration easier).

•EVO Controller with TCP/IP adapter.

Before you power up the Cellular Router, please insert an active SIM card.

Now power up your PC, NetComm Router, Switcher (HUB)and EVO controller with TCP/IP

adapter in a similar configuration shown above.

The PC should be set to obtain an IP address automatically and will be given an IP address by the

NetComm router. By default the Lantronics XPort LAN adapter is set to auto DHCP so will also

receive an IP address from the NetComm Router.

Please note: Ensure you do not have any other Auto DHCP routers connected to this setup network.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

In a web browser on the PC enter the following web address (this is the default IP address for the

NetComm Router).

Enter the username root and password admin to login to the modem

At the bottom of the page that loads you should see an connection status similar to as shown below

If the SIM Status is ‘SIM locked’ then select the following menu to unlock the SIM.

You will be prompted to enter the SIM cards pin number to unlock the SIM card.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Enabling the Internet Connection on the Modem

If the SIM card has not yet had the MICA codes encoded into the card you must now call

Telstra and get them to encode (configure) your SIM card.

Once this is done you will have to restart the modem. Once complete continue on with this guide.

Go to ‘Internet Settings / Mobile Broadband / Connection’

You need to create a ‘new’ APN name called ‘telstra.extranet’ and tick the enable check box. See

image below. Press the SAVE button at the bottom of the screen.

Back on the status screen the WWAN connection should now be UP and show the devices

external IP address (similar to as shown below).

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Enable PING and HTTP service

A handy feature (to help with debugging) is to enable PING and HTTP on the NetComm router.

Go to ‘System / Administrator’

Enable all 3 options shown below

Once this enable you then can remotely test if you can ping the device. As well as remotely open

the configuration page in a web browser (http://123.209.21.28:8080 in this example)

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Finding the Lantronics XPort LAN adapters IP address.

Go to ‘Internet Settings / Routing / DHCP’

At the bottom of this screen you will find the IP address of the XPort LAN adapter.

We also recommend that you set a Static IP address in the Lantronic XPort Adapter. Enter the web

configuration page of the device (username admin password n/a) and set the IP address. This will

ensure the IP address of this device never changes. Press Apply Settings once complete.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Port Forwarding

The next step is to port forward ports 80 and 10001 to the sites XPort LAN adapter.

Go to ‘Internet Settings / Routing / NAT’ -

Add two separate rule for 80 and 10001 like shown below.

In the example below the IP address of the XPort LAN module is 192.168.1.58. You must enter the

IP address of the XPort LAN module at your site here.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

Dynamic DNS

Each time you restart the NetComm modem you will notice the device is given a new IP address by

Telstra.

To solve this changing IP address you will need to setup a Dynamic DNS name

You will need to sign up (and pay a small fee) for this service. Select enable and choose the DDNS

service and enter your login details to enable this feature.

Enter your server address and username and password to enable this feature. If you do not enable

DDNS you will not be able to connect to the site if the NetComm modem is restarted. So you will need

to setup and pay for this service.

TECHNOLOGIES

Defining the future of

Access Control

Head Quarters - Sydney NSW Australia

Sales: sales@cstech.biz, Support: support@cstech.biz

Tel. +61 2 9809 5176, Fax. +61 2 8878 0222

Sales: sales@cstech.biz, Support: support@cstech.biz

ABN: 13 108 508 676

The final step is to add the IP addres (or DNS Name) into Evolution so Evolution can connect to

the remote site. The external IP address of the modem in this example is shown below.

Hardware / Locations / Edit – TCP/IP and enter the IP address for the location. See example

below.

Or if you have the Dynamic DNS setup enter the DNS name in the location shown below.

Autres manuels pour NTC-6908

Table des matières

Autres manuels NetComm Wireless Routeur réseau

NetComm Wireless

NetComm Wireless NWL-25 Guide de démarrage rapide

NetComm Wireless

NetComm Wireless NTC-6200 Manuel utilisateur

NetComm Wireless

NetComm Wireless NB304n Manuel utilisateur

NetComm Wireless

NetComm Wireless NF10WV Manuel utilisateur

NetComm Wireless

NetComm Wireless NWL-12 Series Manuel utilisateur

NetComm Wireless

NetComm Wireless NB16DG Mode d’emploi

NetComm Wireless

NetComm Wireless NB16DG Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-140-01 Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-220 Series Manuel utilisateur

NetComm Wireless

NetComm Wireless NF18ACV Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-221 Manuel utilisateur

NetComm Wireless

NetComm Wireless NB304n Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-223 Manuel utilisateur

NetComm Wireless

NetComm Wireless NB16DG Mode d’emploi

NetComm Wireless

NetComm Wireless Vodafone MachineLink 3G Guide de démarrage rapide

NetComm Wireless

NetComm Wireless WSG-NF5 Manuel utilisateur

NetComm Wireless

NetComm Wireless NF10W Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-400 Series Manuel utilisateur

NetComm Wireless

NetComm Wireless NTC-6908 Instructions d'installation

NetComm Wireless

NetComm Wireless NF1ADV Manuel utilisateur

NetComm Wireless

NetComm Wireless NB304n Manuel utilisateur

NetComm Wireless

NetComm Wireless NF10WV Manuel utilisateur

NetComm Wireless

NetComm Wireless NF15ACV Manuel utilisateur

NetComm Wireless

NetComm Wireless NF10WV Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité