NetApp SG1000 Manuel d'utilisation

StorageGRID®11.3

Hardware Installation and

Maintenance Guide

For StorageGRID SG1000 Appliances

January 2020 | 215-14203_2020-01_en-us

docc[email protected]

Contents

SG1000 appliance overview ......................................................................... 5

SG1000 applications ..................................................................................... 7

Installation and deployment overview ........................................................ 8

Preparing for installation ........................................................................... 10

Preparing the site ....................................................................................................... 10

Unpacking the boxes ................................................................................................. 11

Obtaining additional equipment and tools ................................................................ 11

Web browser requirements ........................................................................................ 12

Preparing networks .................................................................................................... 13

Reviewing appliance network connections ................................................... 13

Networking guidelines .................................................................................. 16

Network installation and provisioning .......................................................... 17

Gathering installation information ............................................................................ 19

Installing the hardware .............................................................................. 24

Registering the hardware ........................................................................................... 24

Installing the appliance into a cabinet or rack ........................................................... 25

Cabling the appliance ................................................................................................ 26

Connecting power cords and applying power ........................................................... 28

Viewing status indicators on the SG1000 .................................................................. 28

Configuring StorageGRID connections .................................................... 30

Accessing the StorageGRID Appliance Installer ...................................................... 30

Configuring network links ......................................................................................... 32

Configuring StorageGRID IP addresses .................................................................... 38

Verifying network connections .................................................................................. 40

Verifying port-level network connections ................................................................. 41

Configuring the BMC interface ................................................................ 43

Changing the root password for the BMC interface .................................................. 43

Setting the IP address for the BMC management port .............................................. 44

Accessing the BMC interface .................................................................................... 46

Configuring SNMP settings for the SG1000 ............................................................. 47

Deploying a services appliance node ......................................................... 48

Deploying a services appliance as a primary Admin Node ...................................... 48

Deploying a services appliance as a Gateway or non-primary Admin Node ............ 52

Monitoring StorageGRID appliance installation ....................................................... 56

Troubleshooting the hardware installation .............................................. 58

Viewing boot-up codes for the SG1000 .................................................................... 58

Viewing error codes for the SG1000 ......................................................................... 60

Hardware setup appears to hang ................................................................................ 61

Troubleshooting connection issues ........................................................................... 62

Unable to connect to the appliance ............................................................... 62

Rebooting the SG1000 while the StorageGRID Appliance Installer is running ....... 62

Table of Contents | 3

Maintaining the SG1000 appliance ........................................................... 64

Replacing the SG1000 ............................................................................................... 64

Replacing a power supply in the SG1000 ................................................................. 66

Replacing a fan in the SG1000 .................................................................................. 67

Replacing a drive in the SG1000 ............................................................................... 70

Changing the link configuration of the SG1000 ....................................................... 72

Trademark .................................................................................................. 78

How to send comments about documentation and receive update

notifications ............................................................................................ 79

Index ............................................................................................................. 80

4| Hardware Installation and Maintenance Guide for SG1000 Appliances

SG1000 appliance overview

The StorageGRID SG1000 services appliance can operate as a Gateway Node or an Admin Node to

provide high availability load balancing services in a StorageGRID system.

Appliance features

The SG1000 appliance provides the following features:

• Provides Gateway Node or Admin Node functions for a StorageGRID system.

• Includes the StorageGRID Appliance Installer to simplify node deployment and configuration.

Note: StorageGRID software can be automatically retrieved from the Admin Node when you

deploy the appliance, or manually uploaded from a local drive. To further simplify the

deployment process, a recent version of the software is preloaded onto the appliance during

manufacturing.

• Includes a baseboard management controller (BMC) for monitoring and diagnosing some of the

appliance hardware.

• Can connect to all three StorageGRID networks, including the Grid Network, the Admin

Network, and the Client Network. Supports up to four 10-, 25-, 40-, or 100-GbE connections to

the Grid Network and Client Network.

SG1000 diagrams

This figure shows the front of the SG1000 with the bezel removed. The two solid-state drives (SSDs),

indicated by the orange outline, are used for storing the StorageGRID operating system and are

mirrored using RAID1 for redundancy. The remaining drive slots are blank. When the SG1000 is

configured as an Admin Node, the drives are used to store audit logs, metrics, and database tables.

This figure shows the connectors on the back of the SG1000.

Port Type Use

1 Network ports

1-4 10/25/40/100-GbE, based

on cable or QSFP

transceiver type, switch

speed, and configured link

speed

Connect to the Grid Network and the

Client Network for StorageGRID.

2 BMC

management

port

1-GbE (RJ-45) Connect to the SG1000 baseboard

management controller.

3 Diagnostic and

support ports • VGA

• Serial, 115200 8-N-1

• USB

Reserved for technical support use.

4 Admin Network

port 1 1-GbE (RJ-45) Connect the SG1000 to the Admin

Network for StorageGRID.

5 Admin Network

port 2 1-GbE (RJ-45) Options:

• Bond with management port 1 for a

redundant connection to the Admin

Network for StorageGRID.

• Leave disconnected and available for

temporary local access (IP

169.254.0.1).

• During installation, use port 2 for IP

configuration if DHCP-assigned IP

addresses are not available.

6| Hardware Installation and Maintenance Guide for SG1000 Appliances

SG1000 applications

You can configure the StorageGRID SG1000 services appliance in various ways to provide gateway

services as well as redundancy of some grid administration services.

The SG1000 can be added to a new or existing grid as a Gateway Node. It can be added to a new grid

as a primary or non-primary Admin Node, or to an existing grid as a non-primary Admin Node.

The SG1000 facilitates the use of high availability (HA) groups and intelligent load balancing for S3

or Swift data path connections.

The following examples describe how you can maximize the capabilities of the SG1000:

• Use two SG1000 appliances to provide gateway services by configuring them as Gateway Nodes.

• Use two SG1000 appliances to provide redundancy of some grid administration services. Do this

by configuring each of them as Admin Nodes.

• Use two SG1000 appliances to provide highly available load balancing and traffic shaping

services accessed through one or more virtual IP addresses. Do this by configuring the appliances

as any combination of Admin Nodes or Gateway Nodes and adding both nodes to the same HA

gateway group.

Attention: If you use Admin Nodes and Gateway Nodes in the same HA group, CLB ports and

Admin Node-only ports will not fail over.

The SG1000 enables deployment of appliance-only grids with no dependencies on external

hypervisors or compute hardware.

Installation and deployment overview

You can install one or more StorageGRID services appliances when you first deploy StorageGRID,

or you can add services appliance nodes later as part of an expansion.

Before you begin

Your StorageGRID system is using the required version of StorageGRID software.

Installation and deployment tasks

Preparing and adding a StorageGRID appliance to the grid includes two primary phases.

1. Installing and configuring appliance hardware

Installing and configuring the StorageGRID appliance hardware includes the following steps:

1. Preparing for installation:

• Preparing the installation site

• Unpacking the boxes and checking the contents

• Obtaining additional equipment and tools

• Verifying network configuration

2. Installing the hardware:

• Registering the hardware

• Installing the appliance into a cabinet or rack

• Cabling the appliance

• Connecting the power cord and applying power

• Viewing boot-up status codes

3. Configuring the hardware:

• Accessing StorageGRID Appliance Installer and configuring the link and network IP settings

required to connect to StorageGRID networks

• Accessing the baseboard management controller (BMC) interface on the SG1000

2. Deploying an appliance Gateway or Admin Node

After the appliance hardware has been installed and configured, you can deploy the appliance as a

Gateway Node or an Admin Node in a StorageGRID system.

Task Instructions

Deploying an appliance Gateway or Admin

Node in a new StorageGRID system

Deploying a services appliance node

on page

Adding an appliance Gateway or Admin Node

to an existing StorageGRID system Instructions for expanding a StorageGRID

system

Deploying an appliance Gateway or Admin

Node as part of a node recovery operation Instructions for recovery and maintenance

Related tasks

Preparing for installation

on page 10

Installing the hardware

on page 24

Configuring StorageGRID connections

on page 30

Related information

Expanding a StorageGRID system

Recovery and maintenance

Installation and deployment overview | 9

Preparing for installation

Preparing to install a StorageGRID appliance entails preparing the site and obtaining all required

hardware, cables, and tools. You should also gather IP addresses and network information.

Steps

1. Preparing the site on page 10

2. Unpacking the boxes on page 11

3. Obtaining additional equipment and tools on page 11

4. Web browser requirements on page 12

5. Preparing networks on page 13

6. Gathering installation information on page 19

Preparing the site

Before installing the appliance, you must make sure that the site and the cabinet or rack you plan to

use meet the specifications for a StorageGRID appliance.

Steps

1. Confirm that the site meets the requirements for temperature, humidity, altitude range, airflow,

heat dissipation, wiring, power, and grounding. See the NetApp Hardware Universe for more

information.

2. Confirm that your location provides 120-volt AC power.

3. Obtain a 19-inch (48.3-cm) cabinet or rack to fit shelves of this size (without cables):

Height Width Depth Maximum weight

1.70 in.

(4.32 cm)

17.32 in.

(44.0 cm)

32.0 in.

(81.3 cm)

39 lb.

(17.7 kg)

4. Decide where you are going to install the appliance.

Related information

NetApp Hardware Universe

NetApp Interoperability Matrix Tool

Table des matières

Autres manuels NetApp Stockage

NetApp

NetApp FAS8700 Feuille d'instructions

NetApp

NetApp FAS2700 Series Manuel utilisateur

NetApp

NetApp DS4243 Instructions d'installation et d'entretien

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp FAS8300 Manuel

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp DS460C Manuel utilisateur

NetApp

NetApp FAS2700 Series Manuel

NetApp

NetApp StorageGRID Webscale SG6000 Series Manuel utilisateur

NetApp

NetApp FAS22 Series Manuel utilisateur

NetApp

NetApp NearStore R100 Manuel utilisateur

NetApp

NetApp FAS2800 Manuel

NetApp

NetApp AFF A900 Manuel

NetApp

NetApp StorageGRID SD100 Manuel utilisateur

NetApp

NetApp AFF A200 Manuel utilisateur

NetApp

NetApp FAS8200 Series Manuel utilisateur

NetApp

NetApp FAS9500 Feuille d'instructions

NetApp

NetApp FAS2020 Manuel

NetApp

NetApp FAS26 Series Manuel

NetApp

NetApp AFF A320 Manuel utilisateur

NetApp

NetApp SolidFire C-Series Manuel

NetApp

NetApp SOLIDFIRE Manuel utilisateur

NetApp

NetApp DS4486 Manuel

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur