NetApp SG100 Feuille d'instructions

Install hardware (SG100 and SG1000)

StorageGRID

NetApp

March 03, 2022

This PDF was generated from https://docs.netapp.com/us-en/storagegrid-116/sg100-1000/registering-

hardware-sg100-and-sg1000.html on March 03, 2022. Always check docs.netapp.com for the latest.

Table of Contents

Install hardware (SG100 and SG1000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Register hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Install appliance into a cabinet or rack (SG100 and SG1000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

Cable appliance SG100 and SG1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê3

Connect power cords and apply power (SG100 and SG1000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê6

View status indicators on SG100 and SG1000 appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê6

Install hardware (SG100 and SG1000)

Registering the appliance hardware provides support benefits.

Steps

1. Locate the chassis serial number for the appliance.

You can find the number on the packing slip, in your confirmation email, or on the appliance after you

unpack it.

2. Go to the NetApp Support Site at mysupport.netapp.com.

3. Determine whether you need to register the hardware:

If you are a… Follow these steps…

Existing NetApp customer a. Sign in with your username and password.

b. Select Products > My Products.

c. Confirm that the new serial number is listed.

d. If it is not, follow the instructions for new NetApp

customers.

New NetApp customer a. Click Register Now, and create an account.

b. Select Products > Register Products.

c. Enter the product serial number and requested

details.

After your registration is approved, you can

download any required software. The approval

process might take up to 24 hours.

Install appliance into a cabinet or rack (SG100 and SG1000)

You must install a set of rails for the appliance in your cabinet or rack, and then slide the

appliance onto the rails.

What you’ll need

•You have reviewed the Safety Notices document included in the box, and understand the precautions for

moving and installing hardware.

•You have the instructions packaged with the rail kit.

Steps

1. Carefully follow the instructions for the rail kit to install the rails in your cabinet or rack.

2. On the two rails installed in the cabinet or rack, extend the movable parts of the rails until you hear a click.

3. Insert the appliance into the rails.

4. Slide the appliance into the cabinet or rack.

When you cannot move the appliance any further, pull the blue latches on both sides of the chassis to slide

the appliance all the way in.

Do not attach the front bezel until after you power on the appliance.

Cable appliance SG100 and SG1000

You must connect the management port on the appliance to the service laptop and

connect the network ports on the appliance to the Grid Network and optional Client

Network for StorageGRID.

What you’ll need

•You have an RJ-45 Ethernet cable for connecting the management port.

•You have one of the following options for the network ports. These items are not provided with the

appliance.

◦One to four TwinAx cables for connecting the four network ports.

◦For the SG100, one to four SFP+ or SFP28 transceivers if you plan to use optical cables for the ports.

◦For the SG1000, one to four QSFP+ or QSFP28 transceivers if you plan to use optical cables for the

ports.

Risk of exposure to laser radiation — Do not disassemble or remove any part of a SFP or

QSFP transceiver. You might be exposed to laser radiation.

About this task

The following figures show the ports on the back of the appliance.

SG100 port connections

SG1000 port connections

Port Type of port Function

1 BMC management port

on the appliance

1-GbE (RJ-45) Connects to the network where you

access the BMC interface.

2 Four network ports on the

appliance

•For the SG100: 10/25-

GbE

•For the SG1000:

10/25/40/100-GbE

Connect to the Grid Network and the

Client Network for StorageGRID.

3 Admin Network port on

the appliance (labelled P1

in the figures)

1-GbE (RJ-45)

Important: This port

operates only at 1000

baseT/full and does not

support 10- or 100-

megabit speeds.

Connects the appliance to the Admin

Network for StorageGRID.

Port Type of port Function

Rightmost RJ-45 port on

the appliance

1-GbE (RJ-45)

Important: This port

operates only at 1000

baseT/full and does not

support 10- or 100-

megabit speeds.

•Can be bonded with management

port 1 if you want a redundant

connection to the Admin Network.

•Can be left disconnected and

available for temporary local access

(IP 169.254.0.1).

•During installation, can be used to

connect the appliance to a service

laptop if DHCP-assigned IP

addresses are not available.

Steps

1. Connect the BMC management port on the appliance to the management network, using an Ethernet

cable.

Although this connection is optional, it is recommended to facilitate support.

2. Connect the network ports on the appliance to the appropriate network switches, using TwinAx cables or

optical cables and transceivers.

The four network ports must use the same link speed. See the following tables for the

equipment required based on your hardware and link speed.

SG100 link speed (GbE) Required equipment

10 SFP+ transceiver

25 SFP28 transceiver

SG1000 link speed (GbE) Required equipment

10 QSA and SFP+ transceiver

25 QSA and SFP28 transceiver

40 QSFP+ transceiver

100 QFSP28 transceiver

◦If you plan to use Fixed port bond mode (default), connect the ports to the StorageGRID Grid and

Client Networks, as shown in the table.

Port Connects to…

Port 1 Client Network (optional)

Port Connects to…

Port 2 Grid Network

Port 3 Client Network (optional)

Port 4 Grid Network

◦If you plan to use the Aggregate port bond mode, connect one or more of the network ports to one or

more switches. You should connect at least two of the four ports to avoid having a single point of

failure. If you use more than one switch for a single LACP bond, the switches must support MLAG or

equivalent.

3. If you plan to use the Admin Network for StorageGRID, connect the Admin Network port on the appliance

to the Admin Network, using an Ethernet cable.

Connect power cords and apply power (SG100 and SG1000)

After connecting the network cables, you are ready to apply power to the appliance.

Steps

1. Connect a power cord to each of the two power supply units in the appliance.

2. Connect these two power cords to two different power distribution units (PDUs) in the cabinet or rack.

3. If the power button on the front of the appliance is not currently illuminated blue, press the button to turn on

power to the appliance.

Do not press the power button again during the power-on process.

4. If errors occur, correct any issues.

5. Attach the front bezel to the appliance if removed.

Related information

View status indicators on SG100 and SG1000 appliances

The appliance includes indicators that help you determine the status of the appliance

controller and the two SSDs.

Appliance indicators and buttons

Display State

1 Power button •Blue: the appliance is powered

on.

•Off: the appliance is powered

off.

2 Reset button Use this button to perform a hard

reset of the controller.

3 Identify button This button can be set to Blink, On

(Solid), or Off.

•Blue, blinking: Identifies the

appliance in the cabinet or

rack.

•Blue, solid: Identifies the

appliance in the cabinet or

rack.

•Off: The appliance is not

visually identifiable in the

cabinet or rack.

4 Alarm LED •Amber, solid: An error has

occurred.

Note: To view the boot-up and

error codes, you must access

the BMC interface.

•Off: No errors are present.

General boot-up codes

During boot-up or after a hard reset of the appliance, the following occurs:

1. The baseboard management controller (BMC) logs codes for the boot-up sequence, including any errors

that occur.

2. The power button lights up.

3. If any errors occur during boot-up, the alarm LED lights up.

To view the boot-up and error codes, you must access the BMC interface.

SSD indicators

LED Display State

1 Drive status/fault •Blue (solid): drive is online

•Amber (blinking): drive failure

•Off: slot is empty

2 Drive active Blue (blinking): drive is being

accessed

Related information

Troubleshoot hardware installation (SG100 and SG1000)

Configure BMC interface (SG100 and SG1000)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NetApp Stockage

NetApp

NetApp DS224C Manuel utilisateur

NetApp

NetApp FAS2500 Manuel d'utilisation et d'entretien

NetApp

NetApp AFF A400 Manuel utilisateur

NetApp

NetApp SteelStore 30 Series Manuel utilisateur

NetApp

NetApp E5700 Manuel utilisateur

NetApp

NetApp DE5600 Manuel utilisateur

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp StorageGRID Webscale SG5700 Series Manuel d'utilisation

NetApp

NetApp DS460C Manuel utilisateur

NetApp

NetApp AFF A800 Mode d’emploi

NetApp

NetApp StorageGRID Webscale SG5700 Series Manuel d'utilisation

NetApp

NetApp FAS26 Series Manuel

NetApp

NetApp FAS8300 Manuel

NetApp

NetApp AFF A400 Manuel utilisateur

NetApp

NetApp E2712 Manuel utilisateur

NetApp

NetApp StorageGRID Webscale SG5700 Series Feuille d'instructions

NetApp

NetApp FAS9500 Feuille d'instructions

NetApp

NetApp AFF A900 Manuel

NetApp

NetApp FAS8200 Series Manuel utilisateur

NetApp

NetApp H600S Series Manuel

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp FAS9000 Manuel

NetApp

NetApp AltaVault Cloud Integrated Storage 4.1 Instructions d'installation et d'entretien

NetApp

NetApp FAS9500 Manuel

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur