NetApp FAS8200 Series Manuel

Prepare for installation Install hardware Cable storage Complete system setup

and conﬁguration

1 2 3 4

FAS8200 Systems

Installation and Setup Instructions

Prepare for installation |1

Screwdriver Windows client

Runs the software to conﬁgure

your storage system

Rack space

3U per chassis

You provide

In the box Power cables

Controller-to-controller cables

Cluster interconnect cable

Part number 112-00297 or 112-00299

Storage cables

SAS cables

Part number 112-00436 or

112-00437 or 112-00438

Ethernet cables

Additional network cables

For connecting your storage to your network

switch and Microsoft®Windows®client

Host cables

10 GbE network cable

Part number 112-00299 or

112-00300 or 112-00301

Optical network cable

Part number 112-00188 or

112-00189 or 112-00090

Pre-setup

1. Go to mysupport.netapp.com and create an account, register your system, and get your license keys.

2. Unpack all boxes and inventory contents.

2. Go to to AFF and FAS System Documentation Center and click FAS8200 systems, and then click Installation and Setup:

- Download and complete the Cluster Conﬁguration Worksheet.

- Watch the videos listed under Setup videos.

215-15015_A0

Install hardware |Stage 2

Optional 2-post

mid-mount brackets

• Unpack all boxes and inventory contents.

• Install rail kits, as needed, using the enclosed

installation instructions.

• Install system components on rails or in a

system cabinet per installation instructions.

• Attach cable management arms.

• Place the bezel on the front of the system.

Unpack and install system

Cluster interconnect cable

(PN 112-00297 or 112-00299)

Ethernet cables

To 10 GbE data network switches

2To management network switches

3A To 10GBASE-T data network switches

2To management network switches

To cluster network switches

To 10 GbE data network switches

Switched ONTAP

To 10 GbE data network switches

2To management network switches

3A To 10GBASE-T data network switches

2To management network switches

To 10 GbE data network switches

Switchless ONTAP

Cable controller for switchless ONTAP (option A)

or for switched ONTAP (option B)

See your network administrator for help connecting to your switch.

OPTION A: Cable the cluster

interconnect e0a to e0a and e0b

to e0b ports on both controllers.

OPTION B: Cable e0a and e0b

on both controllers to cluster

network switches.

Connect wrench ports

to the management switch.

Your network topology deﬁnes the

data network switch connections:

OPTION A: Connect 10GBASE-T

ports e0c and e0d to the switches

OPTION B: Connect e0e|0e through

e0h|0h to the switches

OPTION C: Do Option A and Option B

Strap the cables to the cable

management arms. (not shown)

Cable both power supplies

for each chassis.

ALL power cords MUST be used for all units.

10 GbE network cables

(PN 112-00299 or 112-00300 or 112-00301)

Cable storage |Stage 3

Multi-path HA cabling a FAS8200 WITH external storage

(DS212C or DS224C disk shelves)

Storage cables

(PN 112-00436, 112-00437, or 112-00438)

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

AC AC

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

AC AC

IOMA IOMB

Stack 1

First shelf

Controller 2

Controller 1

Stack 2

First shelf

Last shelf

Connect the shelf-to-shelf ports

Connect the controllers to the ﬁrst stack of disk shelves

Connect the controllers to the second stack of disk shelves

Primary path from controller to stack

Secondary path from controller to stack

Set the console port on the laptop to 115,200 baud

with N-8-1, connect to the micro-USB port on the

controller with the console cable.

Connect the laptop to the Management switch

and give the laptop a TCP/IP address on the

management switch

Assign an initial node management IP address to

one of the nodes. If you have DHCP conﬁgured on

your management network, record the IP address

assigned to the new controllers. Otherwise use

Cluster Setup wizard to assign the node

management IP address.

a. Open a console session using PuTTY, a terminal server, or the equivalent for your environment.

b. Enter the management IP address when prompted by the script.

Open a browser and enter management IP address. (https://xxx.xxx.xxx.xxx)

2Complete initial cluster setup:

1. Make sure that your laptop has network discovery enabled. See your laptop’s help for more information.

2. Connect your laptop to the Management switch.

3. Go to network devices and double-click either ONTAP icon.

Note: Accept any certiﬁcates displayed on your screen.

If your laptop has network discovery enabled:

OPTION

If your laptop does not have network discovery enabled:

OPTION

Ensure the controller modules are completely cabled and then turn the power supplies.

Management subnet

Laptop

3Use System Manager Guided Setup to conﬁgure your cluster

4Completing setup

1. Verify the health of your system by running Conﬁg Advisor.

2. After you have completed the initial conﬁguration, go to the NetApp ONTAP Resources page for information

about conﬁguring additional features in ONTAP.

micro USB console cable

Ethernet cable

If your system has one or more external drive shelves, set the shelf IDs:

1. Power on the drive shelf, and then remove the end cap on the left of the shelf.

2. Press and hold the orange button until the ﬁrst digit blinks, and then press the button to advance

the ﬁrst digit (0-9) to the desired number. The ﬁrst digit continues to blink.

3. Press and hold the button until the second digit blinks, and then press the button to advance

the second digit (0-9) to the desired number. The ﬁrst digit stops blinking, and the second digit continues to blink.

4. Press and hold the button until the second digit stops blinking, and then replace the end cap on the shelf.

5. Wait about 10 seconds for both digits to start blinking again and for the LED to illuminate,

and then power-cycle the drive shelf to make the shelf ID take eect.

6. Repeat these steps for any remaining drive shelves.

Complete system setup and conﬁguration |Stage 4

FAS8200 system

Management subnet 2

Laptop

Autres manuels pour FAS8200 Series

Table des matières

Autres manuels NetApp Stockage

NetApp

NetApp DS4243 Instructions d'installation et d'entretien

NetApp

NetApp FAS8300 Manuel utilisateur

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp AltaVault Cloud Integrated Storage 4.1 Instructions d'installation et d'entretien

NetApp

NetApp DS224C Manuel utilisateur

NetApp

NetApp FAS25 Series Manuel utilisateur

NetApp

NetApp DS2246 Manuel

NetApp

NetApp H410S Manuel

NetApp

NetApp AFF A700s Manuel utilisateur

NetApp

NetApp AFF A300 Manuel utilisateur

NetApp

NetApp HCI Manuel utilisateur

NetApp

NetApp StorageGRID Webscale SG5700 Series Feuille d'instructions

NetApp

NetApp AltaVault System Manuel

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp E2712 Manuel utilisateur

NetApp

NetApp StorageGRID Webscale 10.4 Manuel du produit

NetApp

NetApp DS460C Manuel utilisateur

NetApp

NetApp AFF A400 Manuel utilisateur

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp StorageGRID Webscale SG5700 Series Manuel d'utilisation

NetApp

NetApp AFF A400 Manuel utilisateur

NetApp

NetApp DiskShelf14mk4 FC Manuel utilisateur

NetApp

NetApp H600S Series Manuel

NetApp

NetApp StorageGRID SD100 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur