Neousys IGT-33V Manuel utilisateur

Neousys Technology Inc.

IGT-30 Series Industrial Gateway

User Manual

Revision 1.2

Table of Contents

Table of Contents...................................................................................................................2

Legal Information...................................................................................................................4

Contact Information...............................................................................................................5

Declaration of Conformity.....................................................................................................5

Copyright Notice....................................................................................................................6

Safety Precautions.................................................................................................................7

Service and Maintenance ......................................................................................................8

ESD Precautions....................................................................................................................8

About This Manual.................................................................................................................9

1. Introduction

1.1 IGT-30 Series Overview............................................................................................10

1.2 IGT-30 Series Hardware Specifications..................................................................11

2. System Overview

2.1 IGT-30 Series Packing List.......................................................................................12

2.2 Enclosure Dimensions.............................................................................................13

2.3 IGT-30D/ IGT-31D Front Panel..................................................................................14

2.4 IGT-33V/ IGT-34C Front Panel..................................................................................15

2.5 IGT-30D/ IGT-31D Top Panel.....................................................................................16

2.6 IGT-33V/ IGT-34C Top Panel.....................................................................................17

3. System LED

3.1 Power & System Status LED ...................................................................................18

3.2 Ethernet Port & LED.................................................................................................19

4. Digital I/O and DC Connector

4.1 Digital Input Connector (X1) & Pin Definition.........................................................20

4.2 Digital Output Connector (X2) & Pin Definition......................................................22

4.3 Serial Port (X3) & Console Port Pin Definition.......................................................23

4.4 DC Connector Definition..........................................................................................24

5. System Setup

5.1 External microSDHC Installation/ Replacement ....................................................26

5.2 Internal microSDHC Card & Battery Installation....................................................27

5.3 mini PCIe Installation ...............................................................................................33

5.4 DIN Rail Installation..................................................................................................41

5.5 Powering-on the System..........................................................................................43

5.5.1 DC Input............................................................................................................43

5.5.2 Power Device Mode..........................................................................................44

6. Initial Login

6.1 Login via Console Port ............................................................................................45

6.2 Login via Ethernet....................................................................................................48

6.3 Utility Script ..............................................................................................................52

7. Digital Input and Output

7.1 IGT-30D/31D..............................................................................................................53

7.1.1 Mode of Digital Inputs .......................................................................................53

7.1.2 Wiring of Digital Input........................................................................................54

7.1.3 Wiring of Digital Output.....................................................................................55

7.2 IGT-33C/ 34C.............................................................................................................56

7.2.1 Wiring of Digital Input........................................................................................56

7.2.2 Wiring of Digital Output.....................................................................................56

8. Analog Input

8.1 IGT-33V......................................................................................................................57

8.1.1 Voltage Input.....................................................................................................57

8.1.2 Wiring of Voltage Input......................................................................................57

8.2 IGT-34C......................................................................................................................58

8.2.1 Mode of Current Input.......................................................................................58

8.2.2 Wiring of Current Input......................................................................................58

Appendix A Sysfs Mapping

IGT-30D .................................................................................................................................59

IGT-31D .................................................................................................................................60

IGT-33V..................................................................................................................................61

IGT-34C .................................................................................................................................62

Appendix B Utility Script

Button State Monitor..............................................................................................................63

Analog Input monitor..............................................................................................................64

Digital Input Monitor...............................................................................................................65

User Definable LED ...............................................................................................................65

Digital Output Control/ Monitor...............................................................................................66

RS-232/ 422/ 485 Switch .......................................................................................................67

Appendix C Analog Function

Legal Information

All Neousys Technology Inc. products shall be subject to the latest Standard

Warranty Policy

Neousys Technology Inc. may modify, update or upgrade the software, firmware or

any accompanying user documentation without any prior notice. Neousys

Technology Inc. will provide access to these new software, firmware or

documentation releases from download sections of our website or through our

service partners.

Before installing any software, applications or components provided by a third party,

customer should ensure that they are compatible and interoperable with Neousys

Technology Inc. product by checking in advance with Neousys Technology Inc..

Customer is solely responsible for ensuring the compatibility and interoperability of

the third party’s products. Customer is further solely responsible for ensuring its

systems, software, and data are adequately backed up as a precaution against

possible failures, alternation, or loss.

For questions in regards to hardware/ software compatibility, customers should

contact Neousys Technology Inc. sales representative or technical support.

To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be

responsible for any interoperability or compatibility issues that may arise when (1)

products, software, or options not certified and supported; (2) configurations not

certified and supported are used; (3) parts intended for one system is installed in

another system of different make or model.

Contact Information / Declaration of Conformity

Contact Information

Headquarters

(Taipei, Taiwan)

Neousys Technology Inc.

15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan

Tel: +886-2-2223-6182 Fax: +886-2-2223-6183 Email, Website

Americas

(Illinois, USA)

Neousys Technology America Inc.

3384 CommercialAvenue, Northbrook, IL 60062, USA

Tel: +1-847-656-3298 Email, Website

China Neousys Technology (China) Ltd.

Room 612, Building 32, Guiping Road 680, Shanghai

Tel: +86-2161155366 Email, Website

Declaration of Conformity

FCC This equipment has been tested and found to comply with the limits for a Class

Adigital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct

the interference at own expense.

CE The product(s) described in this manual complies with all applicable European

Union (CE) directives if it has a CE marking. For computer systems to remain

CE compliant, only CE-complia

nt parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

transcribed, stored in a retrieval system, or translated into any language or

computer language, in any form or by any means, electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without the prior written

consent of Neousys Technology, Inc.

Disclaimer This manual is intended to be used as an informative guide only and is subject

to change without prior notice. It does not represent commitment from Neousys

Technology Inc. Neousys Technology Inc. shall not be liable for any direct,

indirect, special, incidental, or consequential damages arising from the use of

the product or documentation, nor for any infringement on third party rights.

Patents and

Trademarks

Neousys, the Neousys logo, Expansion Cassette, MezIOTM are registered

patents and trademarks of Neousys Technology, Inc.

Windows is a registered trademark of Microsoft Corporation.

Intel®, Core™ is a registered trademark of Intel Corporation

NVIDIA®, GeForce®is a registered trademark of NVIDIA Corporation

Texas Instruments (TI) and Sitara are registered trademarks of Texas

Instruments Incorporated.

All other names, brands, products or services are trademarks or registered

trademarks of their respective owners.

Safety Precautions

Read these instructions carefully before you install, operate, or transport the system.

Install the system or DIN rail associated with, at a sturdy location

Install the power socket outlet near the system where it is easily accessible

Secure each system module(s) using its retaining screws

Place power cords and other connection cables away from foot traffic. Do not

place items over power cords and make sure they do not rest against data cables

Shutdown, disconnect all cables from the system and ground yourself before

touching internal modules

Ensure that the correct power range is being used before powering the device

Should a module fail, arrange for a replacement as soon as possible to minimize

down-time

If the system is not going to be used for a long time, disconnect it from mains

(power socket) to avoid transient over-voltage

Service and Maintenance/ ESD Precautions

Service and Maintenance

ONLY qualified personnel should service the system

Shutdown the system, disconnect the power cord and all other connections

before servicing the system

When replacing/ installing additional components (expansion card, memory

module, etc.), insert them as gently as possible while assuring proper connector

engagement

ESD Precautions

Handle add-on module, motherboard by their retention screws or the module’s

frame/ heat sink. Avoid touching the PCB circuit board or add-on module

connector pins

Use a grounded wrist strap and an anti-static work pad to discharge static

electricity when installing or maintaining the system

Avoid dust, debris, carpets, plastic, vinyl and styrofoam in your work area.

Do not remove any module or component from its anti-static bag before

installation

About This Manual

This manual introduces Neousys IGT-30 series, an industrial grade gateway that can

be deployed in a complex communication network. The manual covers IGT-30 series

connections, LED indicators, initial setup and installation of the system.

Revision History

Version Date Description

1.0 Sep. 2019 Initial release

1.1 Aug. 2020 Added IGT-33V/ IGT-34C

1.2 Sep. 2021

Updated:

IGT-33V analog voltage input wiring

IGT34C current input wiring

IGT-30 Series

1. Introduction

Neousys IGT-30 series are rugged industrial grade ARM-based gateway. Based on

Texas Instruments’ Sitara AM335x family and coupled with Debian operating system,

IGT-30 series are in compliance with CE/FCC, shock, vibration, etc. certifications.

IGT-30 Series Overview

Neousys IGT-30 series, equipped with AM3352 from Texas Instrument's Sitara AM335x

family, is an ARM-based Box PC aimed at Industrial Internet of Things (IIoT) Gateway

and Industry 4.0 applications. As required by any industrial applications, IGT-30 series is

shipped as a ready system preinstalled with Debian and in compliance with common

industrial certifications such as CE/FCC, shock and vibration. It has a power input range

of 12 to 25 VDC and a wide operating temperature from

-25°C to 70°C to ensure IGT-30 continues to function under

harsh industrial conditions.

IGT-30 series supports PoE Powered Device (PD) mode

meaning it can be powered by a LAN cable from a PoE

Power Sourcing Equipment (PSE), and at the same time

transfer data via this cable as well. IGT-30 series has I/Os

that are applicable to a range of industrial grade sensors. It

features one USB2.0 port, two 10/100M LAN ports, one

configurable COM port (RS-232/422/485), one RS-485

(IGT-33V/ 34C only) and a CAN bus port (IGT-31D only). In

addition to the ports mentioned, there are built-in isolated digital input channels that

accept discrete signals from various sensors or buttons/ switches. There are also built-in

isolated digital output channels to control actuators and indicators.

Communication wise, IGT-30 series has a mini PCIe slot and a USIM holder allowing it to

transmit acquired data and system status via 3G, 4G or WiFi (mini PCIe WiFi module).

There are two openings on top of IGT-30 series for users to mount the SMA connector of

the wireless module. In terms of storage, IGT-30 series has dual microSDHC slots, one

internal and one external. This design allows users to separate system/ user data and

can also expedite in OS deployment for mass production. Inherited from its predecessor,

IGT-30 series features six LED indicators and two function buttons that can be

programmed by users. The function buttons can act as controls for IGT-30 series and

exclude the need for external input devices, such as keyboard/ mouse.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Neousys Porte

Neousys

Neousys IGT-30 Series Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur