NEO NI2 Manuel utilisateur

Expand Your Factory Radio

add

iPod®

Enjoy The Music

NI2

Owner’s Manual

Neo Gateway

Table of Contents

Pages

1. Introduction 2

2. Precautions 2

3. Compatibility Notes 2

4. Dipswitch Settings 3

5. Installation 3

Nissan Vehicles

6. Pathnder & Armada Operation 4

7. Sentra & Maxima Operation 7

7a. 2009 Maxima Operation 10

8. Altima & Rouge Operation 12

9. Versa Operation 15

Inniti Vehicles

10. G35 18

11. M35/45 21

12. QX56 23

13. Troubleshooting 27

14. Warranty Info 29

Media Gateway & Optional Add-ons

Media Gateway Harness

Factory Radio

Not Included

iPod

Not Included

Media Gateway

3Ft. HD Radio Cable

(sold with HDRT)

11Ft. iPod Cable

1. Introduction

Thank you for purchasing the ® Neo Gateway. The Neo Gateway is designed to

provide endless hours of listening pleasure from your factory radio. To ensure that

your iPod performs correctly with your radio, we recommend that you read this

entire manual before attempting installation of the Neo Gateway.

The Neo Gateway allows connectivity for iPod and the HD Radio tuner (HDRT

sold separately), enabling full control of these devices from the factory installed

radio. It also retains original system features such as satellite radio and rear seat

entertainment (if equipped).

2. Precautions

UPDATING iPod FIRMWARE

For proper operation of the Neo Gateway, your iPod must be updated with the most

recent version of rmware from Apple. This is done on your computer. To update the

software on the iPod go to: http://www.apple.com/ipod/download/.

Follow the directions on the website to complete the download. There is no charge for

this update.

PREVENTING DAMAGE TO YOUR VEHICLE OR IPOD.

Some installations require you to make wiring connections. To eliminate the risk

of an electrical short, we recommend disconnecting the vehicle’s battery prior to

installation. If you do not feel comfortable making these connections, we suggest you

seek professional installation. We recommend that the iPod be disconnected from the

interface when the vehicle is not in use.

PROPER MOUNTING LOCATION

Securely install the interface in a location free from: heat, humidity, moving parts, sharp

metal edges or direct sunlight. We recommend securing the interface to a suitable

location using: double sided tape, VelcroTM or zip-ties.

3. Compatibility Notes

For the most up to date compatibility information please visit www.

electronics.com to verify your vehicle’s compatibility.

4. Dipswitch Settings

For the 2007-2008 Armada, 2007-2008 G35, 2007-2008 Maxima Non-Navigation,

2007-2008 Pathnder, 2007-2008 Sentra and the 2007-2008 QX56 all dipswitches

must be off (Fig. A).

For the 2007-2008 Altima, 2007-2008 Rouge and the 2007-2008 Versa dipswitch

number 3 needs to be on (Fig. B).

Fig. A

Fig. B

Dipswitch Overview

This is a quick description of the dipswitch functions for the Gateway in Nissan

applications. If you are experiencing Seek or Tune control issues, or would like

to change the operation of the “SEEK” and “TUNE” buttons, this section may be

helpful to you.

Dipswitch 3

Reverses “SEEK” and “TUNE” button congurations; this is good for allowing

the end user to congure the “SEEK” and “TUNE” buttons to their personal

preference. For example: In the Armada/Pathnder, the default setting for the HD

Radio controls causes the Seek and Tune functions to be reversed. This is so

the iPod controls can utilize the tuning knob to scroll through the browse menu. If

you have purchased this kit mainly for HD Radio and not iPod, turning dipswitch

3 on will reverse the “SEEK” and “TUNE” commands to their respective buttons.

However when this is done, turning the Tuning Knob on the radio clockwise will

no longer do track forward or scroll through the browse menu in iPod mode, those

commands have now been assigned to the “SEEK>>” button.

1. Disconnect Neo Gateway from vehicle harness.

2. Turn on dipswitch #3 by moving it down.

3. Connect Neo Gateway to vehicle harness.

5. Installation

1. When making electrical connections it is always recommended that the

vehicle’s battery be disconnected from the electrical system before performing

the installation.

2. Carefully remove the trim panels covering the bolts that secure the radio into

the dash cavity. Remove these bolts, and carefully pull the radio from the dash of

the vehicle. This will provide access to the factory radio connectors where you will

connect the Neo Gateway harness.

3. Disconnect the factory 20-Pin and 12-Pin harnesses from the back of the radio.

2007-2008 Armada

2007-2008 G35

2007-2008 Maxima Non-Navigation

2007-2008 Pathnder

2007-2008 Sentra

2007 QX56

2007-2008 Altima

2007-2008 Rouge

2007-2008 Versa

For the 2007-2008 M35/45 Dipswitches 1 and 2 need to be on (Fig C).

Fig. B

2007-2008 M35/45

Disconnect the antenna from the radio.

4. Connect the 8-Pin iPod docking cable into the rst port on the Neo Gateway

(farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash

to the location where the iPod will be mounted or stored (for example the glove box

or center console). This location will vary based on the vehicle, and the customer’s

prefrence. When running this cable through the dash be sure to secure it away from

moving parts or sharp metal edges that may damage the cable.

5. If connecting the HD Radio Tuner (HDRT sold separately), make the following

connections before connecting the Gateway to the vehicle. Plug the 3 foot HD

Radio Cable (8-Pin mini-din to 8-Pin mini-din) into the second port (closest to the

dipswitches) on the Neo Gateway. Connect the other end of this cable into the HD

Radio tuner. Connect the factory antenna cable into the antenna connection on the

HD Radio tuner (HDRT) using a Best Kits BAA36 antenna adaptor (or equivalent) if

needed to make this connection.

6. Plug in the male connectors on the NI2 harness into the 20-pin and 12-pin ports

on the back of the radio. Next, connect the factory 20-pin and 12-pin harnesses into

the female connectors on the NI2 harness. Be sure to make a rm connection but

do not force it. Plug the Black micro-t 24-pin connector on the NI2 harness into the

Gateway Neo Gateway box.

7. To complete the installation secure the Neo Gateway (Gateway) and HD Radio

tuner (HDRT) into the cavity in the dash behind the radio. Be sure that the cables

and interface modules are not near moving parts or sharp metal edges as they may

damage the cables. To prevent rattling noises inside the dash use zip ties, tape or

other fasteners to mount the interfaces securely.

8. With all connections made, reconnect the vehicle’s battery, insert the key into the

ignition, and turn the vehicle on. Check for proper operation of the Neo Gateway and

HD Radio tuner before reinstalling the factory dash panels.

9. Note: The rst time you access the Neo Gateway, your radio may display “DEV

INIT” while the device is initializing. If this is displayed, please wait one minute then

cycle the ignition off and on. Then access SAT mode again to begin normal gateway

operation.

6. Pathnder & Armada

iPod Operation

Entering Mode Select Menu

Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.

Imneotely turn the rotary tune knob to scroll through the available sources. Once

“IPOD” is displayed, press the “<<SEEK” button to select it.

Next Track

Turn the rotary tune knob clockwise to advance to the next track.

Previous Track

Turn the rotary tune knob counter clockwise to return to the previous track.

Random Mode

Press the “SCAN” button while listening to the iPod to toggle through the random

modes.

Entering Browse Menu / Select

Press the “<<SEEK” button to enter the Browse menu or to make a selection while in

the Browse menu.

Menu Navigation

Turn the rotary tune knob clockwise to scroll through the options in the Browse menu.

Steering Wheel Controls

Press and hold “▲” to enter the Browse menu.

Exit Browse menu

Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically

exit.

Browse by Artist

Press the “<<SEEK” button to enter the Browse menu.

”PL:LIST” will appear on your display.

Turn the rotary tune knob until “AR:ARTIST” is displayed.

Press the “<<SEEK” button to select Browse by Artist.

The list of Artists on your iPod will be displayed one at a time in alphabetical order. “AR”

will be displayed in front of the artist’s name to indicate that you are searching for an

artist.

Turn the rotary tune knob to cycle through the artists.

When the desired artist is displayed on the radio,

Press the “<<SEEK” button to select the artist and display the albums by that artist.

The Albums from the selected Artist will be displayed one at a time in alphabetical order.

“AL” will be displayed in front of the name of the album to indicate you are searching

for an album.

Turn the rotary tune knob to cycle through the albums.

Once the desired album is displayed,

Press the “<<SEEK” button to select the desired Album.

The rst song in the album will be displayed. “TR” will be displayed in front of the song

title to indicate that a “track” or song title is being displayed.

Turn the rotary tune knob to cycle through the songs in the selected album.

Songs are listed in the order in which they appear in the album, not alphabetically.

Once the radio displays the name of the desired song

Press the “<<SEEK” button to select and play the desired song.

The display will automatically change to display and scroll the title of the chosen song.

HD Radio Operation

Entering Mode Select Menu

Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.

Imneotely turn the rotary tune knob to scroll through the available sources. Once “HD-

FM” is displayed, press the “<<SEEK” button to select it.

Tune Up

Press the “SEEK >>” button to manually tune up.

Seek Up

Turn the Tuning Knob Clockwise to seek up to next available station.

Tune Down

Press the “<<SEEK” button to manually tune down.

Seek Down

Turn the rotary tune knob Counter-clockwise to seek down to next available station.

Changing Bands

Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.

Imneotely turn the rotary tune knob to scroll through the available sources. Once the

band you would like to select is displayed (“HD-AM” or “HD-FM”), press the “<<SEEK”

button to select it.

Store Presets

Tune to a station you want to store. Press the “SCAN” button. Turn the rotary tune knob

to select the preset location (1-18) where you wish to store the preset. When the preset

location is displayed (for example PRE1) press “SEEK>>” to store it. The screen will

display “PR SAVED” and your preset has been stored into memory.

Recall Presets

Press the “SCAN” button. Turn the rotary tune knob to scroll through the stored preset

stations. When the desired preset is displayed, press the “<<SEEK” button to select it.

Exit menus

Press the “SCAN” button to exit the Preset Menu and continue playing the current

station. “EXIT” will be displayed when the button is pressed. You can also wait the

allotted 10 seconds and the menu will exit automatically.

Steering Wheel Controls

Press and hold“▲” to tune up or “▼” to tune down.

Selecting AUX Input

Entering Mode Select Menu

Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.

Imneotely turn the rotary tune knob to scroll through the available sources. Once “AUX”

is displayed, press the “<<SEEK” button to select it.

Selecting Factory Installed Satellite Radio (If

equipped)

Entering Mode Select Menu

Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen. Im-

neotely turn the rotary tune knob to scroll through the available sources. Once “SAT” is

displayed, press the “<<SEEK” button to select it.

7. Sentra & Maxima

Important Conguration Process

To ensure proper functionality of your Gateway iPod interface, you must rst set the

“TUNE” and “SEEK” buttons to the proper conguration. To do this you must rst enter

the Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on

the screen. Immediately press the “SCAN” button until “TUNEREV” is displayed. After

6 seconds the radio will time out and the “TUNE” button is now congured properly. You

must repeat the same process for the “SEEK” button. To do this you must rst enter the

Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on

the screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After

6 seconds the radio will time out and the “SEEK” button is now congured properly.

iPod Operation

Entering Mode Select Menu

Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately

press the “SEEK>>” button to scroll through the available sources. Once “IPOD” is

displayed, press the “<<TUNE” button to select it.

Next Track

Press the “SEEK>>” button to advance to the next track.

Previous Track

Press the “<<SEEK” button to return to the previous track.

Random Mode

Press the “SCAN” button while listening to the iPod to toggle through the random

modes.

Entering Browse Menu / Select

Press the “TUNE>>” button TWICE to enter the Browse menu or to make a selection

while in the Browse menu

Menu Navigation

Press “SEEK>>” to scroll through the options Browse menu.

Steering Wheel Controls

Press and hold “▲” to move forward one track or “▼” to move backward one track.

Exit Browse menu

Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically

exit.

Changing Display

Press the “DISP” button to toggle through the display modes (Track, Artist, etc).

Browse by Artist

Press the “TUNE>>” button TWICE to enter the Browse menu.

”PL:LIST” will appear on your display.

Press the “SEEK>>” button until “AR:ARTIST” is displayed.

Press the “TUNE>>” button TWICE to select Browse by Artist.

The list of Artists on your iPod will be displayed one at a time in alphabetical order. “AR”

will be displayed in front of the artist’s name to indicate that you are searching for an

artist.

Press the “SEEK>>” button to cycle through the artists.

When the desired artist is displayed on the radio,

Press the “TUNE>>” button TWICE to select the artist and display the albums by that

artist.

The Albums from the selected Artist will be displayed one at a time in alphabetical order.

“AL” will be displayed in front of the name of the album to indicate you are searching

for an album.

Press the “SEEK>>” button to cycle through the albums.

Once the desired album is displayed,

Press the “TUNE>>” button TWICE to select the desired Album.

The rst song in the album will be displayed. “TR” will be displayed in front of the song

title to indicate that a “track” or song title is being displayed.

Press the “SEEK>>” button to cycle through the songs in the selected album.

Songs are listed in the order in which they appear in the album, not alphabetically.

Once the radio displays the name of the desired song

Press the “TUNE>>” button TWICE to select and play the desired song.

The display will automatically change to display and scroll the title of the chosen song.

HD Radio Operation

Important Conguration Process

To ensure proper functionality of your HD tuner, you must rst set the “TUNE” and

“SEEK” buttons to the proper conguration. (Note: You do not have to repeat this

process if you have already done so for iPod control!) To do this you must rst enter the

Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on

the screen. Immediately press the “SCAN” button until “TUNEREV” is displayed. After

6 seconds the radio will time out and the “TUNE” button is now congured properly. You

must repeat the same process for the “SEEK” button. To do this you must rst enter the

Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on

the screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After

6 seconds the radio will time out and the “SEEK” button is now congured properly.

Entering Mode Select Menu

Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately

press the “SEEK>>” button to scroll through the available sources. Once “HD-FM” is

displayed, press the “<<TUNE” button to select it.

Table des matières

Autres manuels NEO Porte

NEO

NEO GM4 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur