NEO ZOOM PANEL Manuel utilisateur
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
ZOOM
PANEL
Professional LED high-power washer
1. Overview
Zoom Panel
Professional LED high-power washer - 27 x 4-in-1 15W
LEDs
Zoom Panel is a high performance indoor pro-
fessional ood powered by 27 x 4-in-1 15W LEDs.
Thanks to its variable 10º-30º zoom, this xture
oers diverse application options, going from a razor
beam to a wide coverage washer. Thanks to its quad-
color LED technology, Zoom Panel enables a smooth
RGBW mix with no multicolor shadows. This unit also
sports a high light intensity, making it an ideal option
for concerts, theaters and tv studios.
Source & Optics
• Light Source: 27 x 4-in-1 15W Osram LEDs
• Beam angle: 10º-30º
Photometric data
• Luminous Flux: 20029lux @ 2m (6.5)
Eects & Functions
• 16.7 million additive RGB colors with full satura-
tion control
• Strobe eect: 0-20Hz
• Dimmer: 0-100%
Control
• DMX Channels: 12/3/4/5/6/7/9/12/17/33
Physical
• Connectors: DMX in/out, Power in/out
• IP Rating: IP66
• Housing: Die-casting aluminum
• Dimensions: 498x200x256 mm.
• Weight: 11 Kg.
ZOOM PANEL
ENGLISH VERSION
p. 3
1.1 Safety warning
Important:
• This product must be installed by a qualied professional.
• All maintenance must be carried out by a qualied
electrician.
• A minimum distance of 0.5m must be maintained be-
tween the equipment and a combustible surface.
• The product must always be operated in a well venti-
lated area.
• DO NOT stare directly into the LED light source.
• Always disconnect the power before carrying out
maintenance.
• The earth must always be connected to the ground.
• Ensure that all parts of the equipment are kept clean and
free of dust.
• A minimum distance of 0.8m must be maintained be-
tween the light and the projecting surface.
2. Installation
2.1 Mounting
HANGING
The xture can be mounted in a hanging position using
the supporting bracket. The bracket should be secured to
the mounting truss or structure using a standard mounting
clamp. Please note that when hanging the unit a safety cable
should also be used.
UPRIGHT
The xture can be mounted in an upright or sitting position
using the supporting brackets.
2.2 Power connections
@220V: 6 units may be connected in series
@110V: 3 units may be connected in series
NOTE
If the signal cable is over 60m between the DMX512 controller
and xture or between two xtures, then a DMX signal ampli-
er is needed as well.
ZOOM PANEL
ENGLISH VERSION
p. 4
3. Display panel operation
3.1 Display operation
MENU: BACK:
ENTER: ENTER OR SAVE:
DOWN: DOWN:
UP: UP:
3.2 Menu map
ZOOM PANEL
ENGLISH VERSION
p. 5
3.3 Edit colour
• Combine [Red], [Green],[Blue] and [White] to create
• an innite range of colors (0-255)
• Set the value of the [Strobs] (0-20Hz), [ZOOM] (0-255)
3.4 Activating auto programs
• Select the target [AUTO] program and press [ENTER].
• Programs [AT.01] to [AT.10] mode.
• Programs [PR.01] to [PR.10] are fully pre-programmed
and can be edited in [EDIT] mode.
3.5 Mix-color setting
• Select [ENTER] UP/DOMN from the [VCW] menu choose
dierent color mixture
3.6 Run mode
• Enter the [RUN] mode to set working mode.
• [DMX] is for using the DMX512 controller the xtures.
• [SLAV] mode is for Master - Slave operation.
3.7 DMX512 settings
• Enter the [ADDR] mode to set the DMX ADDRESS.
ZOOM PANEL
ENGLISH VERSION
p. 6
3.8 Personality
• Enter the [PERSONALITY] mode to select DMX mode:
[TOUR], [ARC.2] [AR2.D], [AR2.S]
• [HSV], [TR16], [AR2.Z], [FULL], [P|X1], [P|X2].
3.9 Editing custom programs
• Enter the [EDIT] mode to edit the custom programs
[PR.01] to [PR.10]
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using RED [Red],
GREEN [Green], BLUE
• [Blue], WHITE [White], ZOOM [Zoom], STRB [Strb], TIME
[Time] & FADE [Fade]
3.10 Special settings
• [SET]...this menu allows the user to adjust key operation
settings for this xture.
• [KEY]...select [ON] for automatic lock-out. Password
to re-enter the display is <UP> + <DOWN> + <UP> +
<DOWN>.
• Select [UPLD] to upload the custom programs from the
current MASTER unit to the SLAVE units.
• In order to reset custom modes to default values se-
lect [REST].
• [COLOR] is for activate/unactivate the color calibra-
tion functions. When [RGBW] is selected, on RGB =
255,255,255, the color is displayed as calibrated in
CAL2 -- RGBW.
• When [COLR] is set [OFF], on RGB = 255,255,255, the RGB
values are not adjusted and the output is most powerful.
When [UC] is selected, the RGB output are adjusted to a
standard preset universal color which balances xtures
from dierent generations.
• Select [DIM1], [DIM2],[DIM3] or [DIM4] for dierent dim-
ming speeds. ([DIM4] is the slowest dimming speed)
• [DERR] Choose [Save] in order to save the last DMX data
incase of DMX signal error. Choose [Black] in order to
blackout in case of DMX signal error.
• [ZOOM] Calibrate the position of POS1&POS2. Set posi-
tion as 0 for smallest zoom position. Select BASE for de-
fault zoom position (zoom=0)
• [STRB] This xture allows for two dierent strobe per-
sonality settings, [CLAS] strobe2 or [SPEC] strobe1. The
[STRB] settings are only valid in the DMX personalities
[TOUR], [AR2.S] and [TR16]
3.11 Balance parameters and correction
menu display
Press [MENU] button to enter the password conrmation, to
enter the correct password <UP + DOWN + UP + DOWN > Key,
press the [MENU] in, the correct password will enter show
submenu.
• Enter the [CAL1] to select white color of dierent color
temperature.
• There are 11 pre-programmed White colors can be edit-
ed by using [Red], [Green], [Blue] & [White].
• Enter the [CAL2] to adjust the RGB parameter to make
dierent whites.
• When the new settings is activated, the DMX controller
choose RGB =255,255,255 the white color will be made
by the actual RGB values on the [CAL2].
ZOOM PANEL
ENGLISH VERSION
p. 7
3.12 Information of the xture (info)
• Push [enter] to enter the [INFO] check the information of
the xture, [VER] to choose version of soware
• Choose [RDM] information, push [DOWN] / [UP] to
choose [UID] the ID number of xtures, [LABL] Identi-
cation of xture
ZOOM PANEL
ENGLISH VERSION
p. 8
4. Using a DMX512 controller
4.1 Channel assignment
NOTE: Rhis product have eleven DMX512 channel conguration:
TOUR/ ARC2/AR2,D/AR2,S/HSV/TR16/AR2,Z/FULL/P|X,1/P|X,2
TOUR
ZOOM PANEL
ENGLISH VERSION
p. 9
ZOOM PANEL
ENGLISH VERSION
p. 10
Table des matières
Autres manuels NEO Matériel de DJ
NEO
NEO ELIPSOLED LITE 50 Manuel utilisateur
NEO
NEO ION 280F Manuel utilisateur
NEO
NEO PROTON IP 12 QA Manuel utilisateur
NEO
NEO NEO FLEX TRUSS Manuel utilisateur
NEO
NEO ION 1915Z Manuel utilisateur
NEO
NEO ION 575 Manuel utilisateur
NEO
NEO ION 715Z Manuel utilisateur
NEO
NEO FRESNELED COLOR Manuel utilisateur
NEO
NEO Moving Torch Manuel utilisateur
NEO
NEO PROTON 12 USB Manuel utilisateur
NEO
NEO FOLLOWER 400 LED Manuel utilisateur
NEO
NEO STORMER QUAD Manuel utilisateur
NEO
NEO Mini Panel Manuel utilisateur
NEO
NEO STEAM INFINITE 450 Manuel utilisateur
NEO
NEO ION 740Z Manuel utilisateur
NEO
NEO BLINDER MKII Manuel utilisateur
NEO
NEO ION 132 F Manuel utilisateur
NEO
NEO FOLLOWER 35ST Manuel utilisateur
NEO
NEO Ion 3715Z Manuel utilisateur
NEO
NEO NEO STRIP GOLD Manuel utilisateur
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur